• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.224-224
• /
• 2010

Pt와 ITO 상부전극의 top-electode/NiO/Pt 구조에서 resistance switching현상을 연구하였다. 하부전극물질이 resistance switching현상에 미치는 영향은 이미 연구되었다. Ohmic 이나 low Schottky contact은 NiO 박막의 resistance switching 현상은 높은 전기장의 인가에 의해 것이 나타나는 것은 알 수 있었다. Ohmic contact에서는 유도전기장에 의한 resistance switching 현상들을 관찰할 수 있다. low Schottky barrier를 가지는 ITO/NiO/Pt 구조에서 resistances switching현상은 관찰되지 않고 Pt/ITO구조로 Ohmic 접촉은 유도전기장에 의한 resistance switching 현상이 나타나지 않음을 알 수 있었다.

• 대한화학회지
• /
• 제51권4호
• /
• pp.339-345
• /
• 2007

Urea는 높은 온도(60~80 °C)의 수용액 상태에서 PtCl2, H2[PtCl6]·6H2O, H2[IrCl6] Ni(CH3CO2)2 와 반응해서 각각 (1)[PtCl2(Urea)]·2H2O, (2)(NH4)2[PtCl6], (3)(NH4)2[IrCl6]·H2O, (4)[Ni2(OH)2(NCO)2(H2O)2]의 complexes를 생성 한다. complexe 1에서 urea는 중성 bidentate 리간드로써 Pt(II)와 배위한다. complexe 2,3,4에서는 높은 온도에서 반 응하는 동안 배위 urea분자들이 분해되고 다양한 반응생성물들을 얻을 수 있다. 모든 complexes은 각각 적당한 수득률 로 dark green(1) yellow(2), pale brown (3) faint green(4)의 침전물로 분리된다. 반응생성물은 열분석, IR, 1H and 13C NMR spectra에 의해 측정 되었다. 이 complexes의 구성을 설명하는 일반적인 매카니즘이 제시되었다.

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 2002년도 연료전지심포지움 2002논문집
• /
• pp.203-206
• /
• 2002

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.9-11
• /
• 2001

차세대 고속 DRAM기술에 사용될 금속인 Cu의 확산 방지막(diffusion harrier) 물질로는 Ta 또는 W 같은 Refractory metal 이 융점(melting point)이 높고 저항값이 낮아 많이 연구 보고되고 있으나, 본 논문에서는 초고주파 소자에서 Au의 확산 방지 막으로 많이 사용되고 있으며. 선택적 증착이 용이한 Pt과 Ni를 MOS 소자의 Cu 확산 방지 막으로 적용하며 어닐링한 후 소자의 게이트 산화막 누설전류($I_{leak}$), 그리고. Si/$SiO_2$ 계면의 trap density 등의 변이를 측정하여 Cu가 소자의 특성 열화에 미치는 영향을 연구하였다. 실험 결과 Pt/Ti($200{\AA}/100{\AA}$)를 적용한 경우 소자 측성 열화가 가장 적었으며. 이는 Copper의 확산 방지막으로 Pt/Ti를 사용하여 전기적 특성 및 계면 특성을 개선시킬 수 있음을 보여 주었다. 이는 SIMS Profile을 통해서도 확인하였다.

• 대한금속재료학회지
• /
• 제56권12호
• /
• pp.910-914
• /
• 2018

Since catalyst technology is one of the promising technologies to improve the working performance of next generation energy and electronic devices, many efforts have been made to develop various catalysts with high efficiency at a low cost. However, there are remaining challenges to be resolved in order to use the suggested catalytic materials, such as platinum (Pt), gold (Au), and palladium (Pd), due to their poor cost-effectiveness for device applications. In this study, to overcome these challenges, we suggest a useful method to increase the surface area of a noble metal catalyst material, resulting in a reduction of the total amount of catalyst usage. By employing block copolymer (BCP) self-assembly and nano-transfer printing (n-TP) processes, we successfully fabricated sub-20 nm Pt line and cross-bar patterns. Furthermore, we obtained a highly ordered Pt cross-bar pattern on a Ni thin film and a Pt-embedded Ni thin film, which can be used as hetero hybrid alloy catalyst structure. For a detailed analysis of the hybrid catalytic material, we used scanning electron microscope (SEM), transmission electron microscope (TEM) and energy-dispersive X-ray spectroscopy (EDS), which revealed a well-defined nanoporous Pt nanostructure on the Ni thin film. Based on these results, we expect that the successful hybridization of various catalytic nanostructures can be extended to other material systems and devices in the near future.

• 한국재료학회지
• /
• 제11권10호
• /
• pp.846-850
• /
• 2001

In the present study, nano-size powders of ternary ferrites, $Ni_{0.5}Zn_{0.5}Fe_2O_4$, as the potential catalysts of $CO_2$decomposition, were prepared by the wet processing of hydrothermal synthesis and coprecipitation method, and the catalyzing effects of impregnation of the noble metals, Pt and Pd, onto $Ni_{0.5}Zn_{0.5}Fe_2O_4$for the $CO_2$decomposition were investigated. XRD results of the synthesized ferrites showed a typical spinel structure of ferrite and the particle size was very small as about 6~10 nm. BET surface area of the ternary ferrites was not affected by the impregnation of Pt and Pd. The reactivity of the $CO_2$decomposition to carbon was improved by the impregnation of the noble metals of Pd and Pt. The effect of Pd-impregnation on the $CO_2$decomposition rate was higher than Pt-impregnation.

• 센서학회지
• /
• 제23권3호
• /
• pp.211-215
• /
• 2014

The Pt-, Ni- and Cr-decorated tubular $SnO_2$ nanofibers for gas sensors were prepared by the electrospinning of polyvinylpyrrolidone (PVP) nanofibers containing Pt, Ni, and Cr precursors, the sputtering of $SnO_2$ on the electrospun PVP nanofibers, and the removal of sacrificial PVP parts by heat treatment at $600^{\circ}C$ for 2 h. Pt-decorated tubular $SnO_2$ nanofibers showed high response ($R_a/R_g=210.5$, $R_g$: resistance in gas, $R_a$: resistance in air) to 5 ppm $C_2H_5OH$ at $350^{\circ}C$ with negligible cross-responses to other interference gases (5 ppm trimethylamine, $NH_3$, HCHO, p-xylene, toluene and benzene). Cr-decorated tubular $SnO_2$nanofibers showed the selective detection of p-xylene at $400^{\circ}C$. In contrast, no significant selectivity to a specific gas was found in Ni-decorated tubular $SnO_2$ nanofibers. The selective and sensitive detection of gases using Pt-decorated and Cr-decorated tubular $SnO_2$ nanofibers were discussed in relation to the catalytic promotion of gas sensing reaction.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.370-370
• /
• 2010

The effects of adding higher-valence impurities on the bipolar resistive switching characteristics of Pt/$NiO_{1+x}$/TiN MIM stacks and physical properties were investigated. $NiO_{1+x}$ films with 14% W deposited at 20% oxygen partial pressure exhibited the bipolar resistance switching characteristics in Pt/$NiO_{1+x}$/TiN MIM stacks, while $NiO_{1+x}$ films with 8.2% W show unipolar resistance switching behavior. The relationship of W-doping and the crystallinity was studied by X-ray diffraction. The metallic Ni contents and $WO_x$ binding states with W amount was investigated by XPS. Our result showed that the metallic Ni, $WO_x$ binding states, and crystallinity in $NiO_{1+x}$ played an important role on the bipolar resistive switching.

• 한국전기전자재료학회논문지
• /
• 제35권4호
• /
• pp.407-411
• /
• 2022

Bulk-sized PbTiO₃ (PT), which is widely known as a high-performance ferroelectric oxide but cannot be fabricated into a monolithic ceramic due to its high c/a ratio, was successfully prepared with a high tetragonality by partially substituting Ni ions for Pb ions using a solid-state reaction method. We found that Ni-doped PT was well-fabricated as a bulk monolith with a significant c/a ratio of ~1.06. X-ray diffraction on as-sintered and crushed samples revealed that NiTiO₃ secondary phase was present at the doping level of more than 2 at.%. Scanning electron microscopic study showed that NiTiO₃ secondary phase grew on the surface of PT specimens regardless of the doping level possibly due to the evaporation of Pb during sintering. We demonstrated that an unconventional introduction of Ni ions into A-site plays a key role on the fabrication of bulk PT, though how Ni ion functions should be studied further. We expect that this study contributes to a further development of displacive ferroelectric oxides with a high c/a ratio.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1873-1875
• /
• 1999

The effects of electrode and matrix in the PAFC were investigated using AC-impedance spectroscopy. The performance of PAFC was determined by changing external electronic load. AC impedance measurement was carried out as functions of phosphoric acid impregnation temperature. operating temperature and matrix coating method using various cathodes ; 20%Pt/C, 20%Pt-Ni/C, 20%Pt-Co-Ni/C, 10%Pt-Fe-Co/C, and 20%Pt-Fe-Co/C From the analysis of measured impedance data, the interfacial resistance decreased with increasing operating temperature. and with decreasing impregnation temperature. As compared with the alloy catalysts, Pt catalyst showed a lower interfacial resistance. This consist with the cell performance.