• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.665-668
• /
• 2007

The location based service means the service using the location information and the service used based on the location information comes into the spotlight as the critical information of the future mode townsman ubiquitous-City construction. LBS settles down as the core element of ITS or the telematics as the cutting edge technology appearing according to the power generation of the mobile communication technology and recently gradually broadens a range to the public safety service including the distribution management, the asset management, a children and old and the weak protection means, the disaster preparation rescue service like the E-911 of U.S. In the national, the technical regulations about the ground wave LBS was established at November 2005 for the first time in the country. but it actually operated and problems were deduced. Therefore, in this paper, domestic and foreign LBS usage trend and technical standards case try to be analyzed for the revision of the technical regulations of the ground wave LBS serviced in the national and the national technical standards bill for the revision tries to be prepared based on this.

• Journal of the Korean Society for information Management
• /
• v.25 no.3
• /
• pp.231-247
• /
• 2008

The purpose of this study was to try to describe types of invasion of privacy caused by excessive information seeking on mass media. Recent 5 years of cases were gathered and analyzed to see the types of invasion of privacy, and extracted only those cases showing the results by excessive information seeking. Three standards such as the intension, the subject, and the characteristics were selected to differentiate the types and cases. Five types of those three standards were introduced by case by case. The issues regarding ways of privacy protection and correct attitude of information seeking were explored and a few suggestions were included at the end.

• Toxicological Research
• /
• v.33 no.3
• /
• pp.183-189
• /
• 2017

AAALAC International is a private, nonprofit organization that promotes humane treatment of animals in science through a voluntary international accreditation program. AAALAC International accreditation is recognized around the world as a symbol of high quality animal care and use for research, teaching and testing, as well as promoting animal welfare. Animals owned by the institution that are used for research, teaching and testing are included as part of an accredited program. More than 990 animal care and use institutions in 42 countries around the world (more than 170 programs in 13 countries in the Pacific Rim region) have earned AAALAC International accreditation. The AAALAC International Council on Accreditation evaluates overall performance and all aspects of an animal care and use program, involving an in-depth, multilayered, confidential peer-review process. The evaluators (site visitors) consider compliance with applicable local animal legislation of the host country, institutional policies, and employ a customized approach for evaluating overall program performance using a series of primary standards that include the Guide for the Care and Use of Laboratory Animals, the Guide for the Care and Use of Agricultural Animals in Research and Teaching, or the European Convention for the Protection of Vertebrate Animals Used for Experimental and Other Purposes, Council of Europe (ETS 123), and supplemental Reference Resources, as applicable.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2008.04a
• /
• pp.180-184
• /
• 2008

Fire prevention strategies should be aimed at the prevention of structured fire since average annual rates of structured fire have been increased due to economic growth resulted in increasing high rise buildings and multipurpose occupancies over the past ten years. Hence, this study mainly focused on the improve method and problems in the field test of fire detector in compliances with experimental consideration. And it leads us to the flowing conclusions : Firstly, it is necessary to formulate a safety standards on field test. Nowadays, the test enforced in many ways without formulated standard. Therefore it is necessary to be complete the arrangements standardized and how to do the test with formulated safety standards. Second, it is necessary to establish the regal guidance with regard to inspection equipment, ie density, component and temperature of test equipment should be considered. Also the equipment is need to be standardized and improved. Third, fire inspector's competency in their practice should be enhanced. The problems arising from the lack of knowledge and competence regarding inspection could be settled by providing professional education to ensure proficiency in their practice. Specialized training, as has been noted, should be offered in accordance with occupancy type, scale and fire protection system in the fire facilities.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.4
• /
• pp.771-781
• /
• 2017

The helmet is an imperative personal protective equipment. This protective device must be able to guard the human head against potential risks. Helmets are classified according into the purpose of use; therefore, the required performance and specifications depend on the type of products. Military helmets are intended to protect the wearer's head from bullets and shrapnel. Generally, lightweight super fibers and fiber reinforced composite materials are used as helmet shell materials, and NIJ STD of U.S. Department of Justice is most widely used as international standard related to bulletproof helmets. Safety helmets are widely used for industrial application and sports leisure. In general, the performance of shock absorption must be ensured, and various lining systems are applied in material, design, and combination methods. Evaluation standards have also been classified and strictly controlled for each purpose; therefore, it is difficult to certify with the existing standards such as the recently developed convergence helmets. However, it is possible to launch the product through a separate national integrated certification procedure.

• Journal of Conservation Science
• /
• v.11 no.1 s.14
• /
• pp.52-57
• /
• 2002

Although a conservation laboratory is a kind of hospital for cultural assets, it is often planned on the standard of ordinary offices. In this study, things and conditions to be considered for a new conservation laboratory were discussed and suggested briefly, for the sections of architecture, electricity and lightning, air condition, fire protection, machinery and tools. As methods of creating a workspace adequate to conservation work, the method of dividing workspace on the basis of workstand and the method of placing machinery and tools on the basis of water supply and sewage systems were explained., Because a conservation laboratory varies in its duties and functions, it seems difficult that all the standards and conditions suggested in this study be fulfilled in every case. But understanding general standards and conditions and choosing ones adequate to special functions of each laboratory will be helpful to planning a new conservation laboratory.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.3
• /
• pp.236-243
• /
• 2010

Fiber Bragg grating(FBG) sensor arrays can be used to monitor the mechanical behavior of the large composite structures such as wind turbine rotor blades and aircrafts. However, brittle FBG sensors, especially multiplexed FBG sensors are easily damaged when they are installed in the flexible structures. As a protection of brittle FBG sensors, epoxy packaged FBG sensors have been presented in this paper. Finite element analysis and experiments were performed to evaluate the effects of adhesives, packaging materials and the bonding layer thickness on the strain transmission. Two types of epoxy were used for packaging FBG sensors and the sensor probes were attached with various bonding layer thickness. It was observed that thin bonding layer with high elastic modulus ratio of the adhesive to packaging provided good strain transmission. However, the strain transmission was significantly decreased when elastic modulus of the adhesive was much lower than the packaged FBG sensor probe's one.

• International Journal of High-Rise Buildings
• /
• v.7 no.4
• /
• pp.265-285
• /
• 2018

This paper presents a state-of-the-art review on the design, research and education aspects of fire safety engineering (FSE) with a particular concern on high-rise buildings. FSE finds its root after Great Fire of Rome in 64 AD, followed by Great London Fire in 1666. The development of modern FSE is continuously driven by industry revolution, insurance community and government regulations. Now FSE has become a unique engineering discipline and is moving towards performance-based design since 1990s. The performance-based fire safety design (PBFSD) involves identification of fire safety goals, design objectives, establishment of performance criteria, and selection of proper solutions for fire safety. The determination of fire scenarios and design fires have now become major contents for PBFSD. To experience a rapid and positive evolution in design and research consistent with other engineering disciplines, it is important for fire safety engineering as a profession to set up a special educational system to deliver the next-generation fire safety engineers. High-rise buildings have their unique fire safety issues such as rapid fire and smoke spread, extended evacuation time, longer fire duration, mixed occupancies, etc., bringing more difficulties in ensuring life safety and protection of property and environment. A list of recommendations is proposed to improve the fire safety of high-rise buildings. In addition, some source information for specific knowledge and information on FSE is provided in Appendix.

• Journal of the Korean Wood Science and Technology
• /
• v.52 no.4
• /
• pp.331-342
• /
• 2024

Rubberwood (Hevea brasiliensis) has excellent physical and mechanical properties and is one of the most widely used species in Southeast Asia. However, it has poor resistance to subterranean termite attacks due to its high sugar and starch contents. The objective of this study was to evaluate the termite resistance of experimental wood-plastic composite (WPC) panels manufactured from rubberwood flour, polyethylene terephthalate, and silica in three different weight ratios (1/2/7, 1/3/6, and 1/4/5). The panels were exposed to Coptotermes curvignathus subterranean termites in a no-choice test under laboratory conditions based on Indonesian standards. Solid rubberwood used as control samples presented poor resistance, exhibiting 23.1% weight loss due to subterranean termite attack, as indicated by low termite mortality and high wood weight loss. In contrast, the WPC samples demonstrated extreme resistance, with weight loss ranging from 0.19% to 0.23%. Based on the findings of this study, the high termite mortality and overall low mass loss of the samples indicate that such manufactured panels could provide a high level of protection with regard to Indonesian standards.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.35 no.2 s.121
• /
• pp.71-80
• /
• 2007

Korea began preserving and managing natural monuments in 1933 under Japanese Colonization, but North Korea and South Korea were forced to establish separate natural monument management policies because of the division after the Korean Independence. The purpose of this study is to compare and analyze the natural monument management policies of both south and North Korea between 1933 and 2005 to introduce new policies for Korea unification. The following are the results: First, South Korea manages every type of cultural asset, including natural monuments, through the 'Cultural Heritage Protection Act,' whereas North Korea managing its cultural assets through the 'Cultural Relics Protection Act' and the 'Landmark/Natural Monument Protection Act.' Second, South Korea preserves and utilizes natural monuments for the purpose of promoting the cultural experience of Korean people and contributing to the development of world culture, whereas North Korea uses its natural monuments to promote the superiority of socialism and protect its ruling power. Third, North and South Korea have similar classification systems for animals, plants, and geology, but North Korea classifies geography as one of its natural monuments. Unlike South Korea, North Korea also designates imported animals and plants not only for the preservation and research of genetic resources, but also for their value as economic resources. Fourth, North Korea authorizes the Cabinet to designate and cancel natural monuments, whereas South Korea designates and cancels natural monuments by the Cultural Heritage Administration through the deliberation of a Cultural Heritage Committee. Both Koreas' central administrations establish policies and their local governments carry them out, while their management systems are quite different. In conclusion, it is important to establish specified laws for the conservation of natural heritages and clarified standards of designation in order to improve the preservation and management system and to sustain the diversity of natural preservation. Moreover it is also necessary to discover resources in various fields, designate protection zones, and preserve imported trees. By doing so, we shall improve South Korea's natural monument management policies and ultimately enhance national homogeneity in preparation for the reunification of the Koreas in the future.