• Journal of Advanced Marine Engineering and Technology
• /
• 제32권5호
• /
• pp.677-683
• /
• 2008

The electric propulsion system us closely related with the economical efficiency of ship operation. Fuel efficiency is mainly decided by propulsion system such as diesel engine, propulsion motor and steam turbine. The hybrid propulsion system for fishing boat consists of diesel engine and battery as propulsion power source. This paper is to design battery capacity according to power consumption with ship operation condition, and to test the power consumption of model ship in the circulating water channel. As a result. it can be known that the optimum ship operation condition affects the fuel efficiency.

• 드라이브 ㆍ 컨트롤
• /
• 제18권4호
• /
• pp.43-51
• /
• 2021

In this study, we designed a hydraulic propulsion propeller system that allows dredged materials to be carried out by the dredger to the disposal place. The proposed model equation was used to formulate the screw propeller specifications considering the resistance to the dredger, and the quantitative specifications of the hydraulic propulsion propeller were determined through the numerical analysis programs. In addition, based on the proposed results, we were able to determine the specifications of the hydraulic system that was used for the hydraulic motor in the propulsion propeller device and then manufactured the hydraulic propulsion propeller. To guarantee the reliability of the proposed model equation, an external testing agency was invited and verified that the hydraulic propulsion propeller based on the proposed model equation could achieve the target speed in the dredger.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.3007-3018
• /
• 2011

This paper describes how to apply to commutate of thyristor efficiently. Thyristor is used for the high power system, as the research to secure domestic technology of the Current Source Inverter(CSI) for the synchronous motor operation which is used for the propulsion system of KTX. It has been composed to be available for the stable switching operation of the thyristor by supplementing problem of load commutation method, according to small Counter ElectricMotive Force(EMF) at low speed area of synchronous motor, via auxiliary commutation circuit using forced commutation method. We also have verified through the simulation using the Matlab.

• 수산해양기술연구
• /
• 제56권1호
• /
• pp.71-81
• /
• 2020

This paper proposes a possibility of using active front-end rectifier with the SVPWM method for induction motor speed control, which is applicable to small electric propulsion boats. The proposed method can produce a more precise sinusoidal input current waveform and a higher power factor than conventional methods. Its speed, torque, input current, DC voltage, and load current control performance are similar to or better than those of conventional methods. Through computer simulations using the PSIM program, the validity of the proposed method was verified by comparing and analyzing the characteristics of the conventional methods and the proposed method.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.722-726
• /
• 2007

In this paper we deal with a design of the integral sliding mode controller to suppress the disturbance force acting on the suspension system of the magnetically levitated train system. One of the important factors that cause the disturbance force acting on the suspension system comes from the low propulsion speed of linear induction motor. In this paper integral sliding mode controller is employed to reject the disturbance force produced by the propulsion system of the linear induction motor. In order to show the effectiveness of the designed controller a dynamic simulation is utilized and the sliding mode controller without integral compensator is compared with the proposed integral sliding mode controller to suppress the disturbance force.

• 전기학회논문지
• /
• 제60권8호
• /
• pp.1502-1509
• /
• 2011

This Paper presents characteristic analysis in terms of interior permanent magnet synchronous motor for electric vehicle propulsion using numerical analysis. Torque ripple analysis, thermal analysis, demagnetization analysis of permanent magnet and mechanical stress analysis with variable operating condition are presented. According to these characteristic analysis, both the performance of motor and possible problems during the operation are examined thoroughly in advance.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제25회 추계학술대회논문집
• /
• pp.162-166
• /
• 2005

고체로켓 모터의 노즐목 삽입재에 적용하는 탄소/탄소 복합재료의 열반응 특성을 분석하였다. 내열평가 시험은 3종류의 TPEM 모터를 사용하였고, 추진제는 2종류를 사용하였다. 삭마율은 연소실 압력이 상승함에 따라, 산화몰분율이 증가함에 따라 증가하고, 소재 밀도가 증가함에 따라 감소한다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.523-526
• /
• 2011

본 연구는 재료물성치의 불확실성을 고려한 구조신뢰성 해석 기법에 대한 내용이다. 설계변수의 확률분포 및 상태한계방정식을 구하고 이에 대한 확률밀도함수와 누적분포함수 계산 시 근사화 기법인 크리깅을 적용하여 구조신뢰성에 대한 계산 및 해석시간을 단축하고자 하였다. 이에 대한 예제로 알루미늄을 소재로 하는 로켓모터케이스의 재료물성치의 분포를 고려한 구조신뢰성 해석을 수행하고 그 결과를 몬테카를로 시뮬레이션과 비교함으로써 제안된 기법에 대한 정확성과 효율성을 판단하고자 한다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.666-669
• /
• 2011

이중펄스 로켓모타에 적용되는 격벽형 펄스분리장치의 파열판 형상을 변경하는 설계를 진행하였다. 펄스분리장치 설계 확정에 앞서 3가지 다른 형상의 파열판 평판시험을 진행하여 파열판 성능을 확인하였다. 평판시험후 시험결과를 분석하여 펄스분리장치 파열판의 8개의 원형 구멍형과 8개의 사다리꼴 구멍 형상을 적용하기로 결정하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2006년도 제27회 추계학술대회논문집
• /
• pp.267-270
• /
• 2006

Polyethylene-GOX 조합 추진제를 이용한 소형 하이브리드 로켓 모터의 연소 특성에 관한 연구를 수행하였다. 그레인 두께에 대하여 평균화된 여러 형태의 상관관계식을 실험 결과와 비교하였으며, 연료 발생율은 연소실로 유입되는 산화제 유량율에 대하여 크게 변화지 않는 것으로 나타났다.