• Journal of Plant Biotechnology
• /
• 제47권3호
• /
• pp.194-202
• /
• 2020

The sweetpotatoes (Ipomoea batatas) generate adventitious roots (ARs) from cut stems that develop into storage roots and make for an important means of propagation. However, few studies have investigated the hormones involved in AR development in sweetpotato. In this study, the expression patterns of hormone-related genes involved in AR formation were identified using the transcriptome data. RNA-seq data from stems grown for 0 and 3 days after cutting were analyzed. In addition, hormone-related genes were identified among differentially expressed genes (DEGs) and filtered genes, and cluster analysis was used to characterize expression patterns by function. Most hormone-related regulated genes expressed 3 days after growing the cut stems were abscisic acid (ABA)-related genes, followed by ethylene- and auxin-related genes. For ABA, the biosynthesis genes (including genes annotated to NINE-CIS-EPOXYCAROTENOID DIOXYGENASE 3 (NCED3)) and signal transduction and perception genes (including genes annotated to PROTEIN PHOSPHATASE 2Cs (PP2Cs)) tended to decrease. Expression patterns of auxin- and ethylene-related genes differed by function. These results suggest that ABA, auxin, and ethylene genes are involved in AR formation and that they may be regulated in a hormone function-dependent manner. These results contribute to the identification of hormone functions during AR formation and may contribute to understanding the mechanism of AR formation in the sweetpotato.

• 대한기계학회논문집A
• /
• 제27권11호
• /
• pp.1979-1985
• /
• 2003

Fretting is a kind of surface degradation mechanism observed in mechanical components and structures. The fretting damage decreases in 50-70% of the plain fatigue strength. This may be observed in the fossil power plant and the nuclear power plant used in special environments and various loading conditions. The thermal degradation of material is observed when the heat resisting steel is exposed for long period time at the high temperature. In the present study, the degraded 1Cr-0.5Mo steel used for long period time at high temperature (about 515$^{\circ}C$) and artificially reheat-treated materials are prepared. These materials are used for evaluating an effect of thermal aging on the fretting fatigue behavior. Through the experiment, it is found that the fretting fatigue endurance limit of the reheat-treated 1Cr-0.5Mo steel decreased about 46% from the non-fretting fatigue endurance limit, while the fretting fatigue endurance limit of the degraded 1Cr-0.5Mo steel decreased about 53% from the non-fretting fatigue endurance limit. The maximum value of fatigue endurance limit difference is observed as 57%(244 MPa) between the fretting fatigue of degraded material and non-fretting fatigue of reheat-treated material. These results can be a basic data to a structural integrity evaluation of heat resisting steel considered to thermal degradation effect.

• 대한기계학회논문집A
• /
• 제27권8호
• /
• pp.1398-1408
• /
• 2003

Tensile and LCF(low cycle fatigue) tests were carried out in air at wide temperature range 20$^{\circ}C$-750$^{\circ}C$ and strain rates of 1${\times}$10$\^$-4//s-1${\times}$10$\^$-2/ to ascertain the influence of strain rate on tensile and LCF properties of prior cold worked 316L stainless steel, especially focused on the DSA(dynamic strain aging) regime. Dynamic strain aging induced the change of tensile properties such as strength and ductility in the temperature region 250$^{\circ}C$-600$^{\circ}C$ and this temperature region well coincided with the negative strain rate sensitivity regime. Cyclic stress response at all test conditions was characterized by the initial hardening during a few cycles, followed by gradual softening until final failure. Temperature and strain rate dependence on cyclic softening behavior appears to result from the change of the cyclic plastic deformation mechanism and DSA effect. The DSA regimes between tensile and LCF loading conditions in terms of the negative strain rate sensitivity were well consistent with each other. The drastic reduction in fatigue resistance at elevated temperature was observed, and it was attributed to the effects of oxidation, creep and dynamic strain aging or interactions among them. Especially, in the DSA regime, dynamic strain aging accelerated the reduction of fatigue resistance by enhancing crack initiation and propagation.

• 과학교육연구지
• /
• 제38권3호
• /
• pp.703-717
• /
• 2014

물리에서 멘탈 시뮬레이션은 개념을 이해하거나 생성하기 위한 중요한 매커니즘이다. 만약 학생들이 멘탈 시뮬레이션에 어려움을 겪는다면 물리 개념의 이해 또한 어려워진다. 3차원 시뮬레이션 콘텐츠는 학생들에게 공간적 조작의 가이드를 제공함으로써 물리 개념 이해를 도울 수 있다. 이 연구에서는 빛의 직진 개념의 이해를 돕기 위한 3차원 시뮬레이션 콘텐츠를 개발하여 대학생 20명에게 적용하였다. 적용 결과, Hake gain이 0.93으로 수업에 대해 매우 높은 수준의 이해도를 보였다. 또한 학생들은 새로운 맥락에 대해서도 멘탈 시뮬레이션을 통해 현상을 잘 예측하였다. 이를 통해 3차원 시뮬레이션 콘텐츠를 통해 학생들의 개념 이해가 잘 이루어졌음을 알 수 있다.

• 대한기계학회논문집
• /
• 제16권9호
• /
• pp.1605-1614
• /
• 1992

본 연구에서는 고장력 7075-T73 알루미늄합금에 대하여 변동하중의 기보파형 인 단일과대하중과 고-저(high-low) 블럭하중하의 지연거동에 미치는 과대하중비 %O.L., 기준응력확대계수범위 .DELTA. $K_{b}$ 및 무차원 균열깊이 a/W의 영향을 규명하였 으며, 또한 Wheeler모델의 수정에 의한 예측피로수명을 실험치와 함께 검토하였다.다.

• 대한기계학회논문집A
• /
• 제25권8호
• /
• pp.1287-1293
• /
• 2001

Fretting is a potential degradation mechanism of structural components and equipments exposed to various environments and loading conditions. The fretting degradation, for example, for example, can be observed in equipments of nuclear, fossil as well as petroleum chemical plants exposed to special environments and loading conditions. It is well known that a cast stainless steel(CF8M) used in a primary reactor coolant(RCS) degrades seriously when that material is exposed to temperature range from 290$\^{C}$∼390$\^{C}$ for long period. This degradation can be resulted into a catastrophical failure of components. In the present paper, the characteristics of the fretting fatigue are investigated using the artificially aged CF8M specimen. The specimen of CF8M are prepared by an artificially accelerated aging technique holding 180hr at 430$\^{C}$ respectively. Through the investigations, the simple fatigue endurance limit of the virgin specimen is not altered from that obtained from the fatigue tests imposed the fretting fatigue. The similar tests are performed using the degraded specimen. The results are not changed from those of the virgin specimen. The significant effects of fretting fatigue imposed on both virgin and degraded specimen on the fatigue strength are not found.

• 한국화재소방학회논문지
• /
• 제21권4호
• /
• pp.38-43
• /
• 2007

최근 우리나라 고층아파트에서 많은 문제가 되고 있는 승강장 부속실의 급기가압 시스템에 있어서 거주자의 피난 시나리오에 따른 차압의 변화 및 연기유동 특성을 FDS 화재모델링을 이용하여 현상학적으로 살펴보았다. 자동차압조절댐퍼의 기준압을 화재실로 할 경우 현관문 누설틈새를 통한 공기의 화재실 유입으로 화재실 및 부속실 모두 절대압이 크게 상승하는 결과를 가져왔으며 피난으로 계단실 방화문이 개방 후에는 다시 닫히지 않아 부속실내의 차압형성이 안 되는 문제점이 예상되었다. 따라서 화재실압이 지속적으로 상승하지 않도록 거실에 별도의 개구부가 필요한 것으로 판단된다. 현관문 개방 후 다시 닫힐 시에는 순간적으로 200 Pa 정도의 높은 과압이 형성되어 이 시간 동안에는 화재실 안의 또 다른 거주자가 현관문을 개방하기는 어려울 것으로 예상되었으며, 현관문만 개방 시에는 적정방연풍속이 유지되었으나, 현관문과 계단실 방화문이 동시에 개방되어 있을 경우에는 적정방연풍속이 생성되지 않아 부속실 및 계단실로의 연기유입이 발생하는 것으로 예측되었다.

• 대기
• /
• 제27권2호
• /
• pp.199-211
• /
• 2017

The cold surges over East Asia can be grouped to two types of the wave-train and the blocking. Recently, the observational study proposed new dynamical index to objectively identify cold surge types. In this study, the dynamical index is applied to the simulations of 10 climate models, which participate in the Coupled Model Intercomparison Project Phase 5 (CMIP5). Focusing on assessment of cold surge simulation, we discuss characteristic of the wave-train and blocking cold surges in the climate models. The wave-train index (WI) and the blocking index (BI) based on potential temperature anomalies at dynamical tropopause over the subarctic region, the northeast China, and the western North Pacific enable us to classify cold surges in the climate models into two types. The climate models well simulate the occurrence mechanism of the wave-train cold surges with vertical structure related to growing baroclinic wave. However, while the wave-train in the observation propagates in west-east direction across the Eurasia Continent, most of the models simulate the southeastward propagation of the wave-train originated from the Kara Sea. For the blocking cold surges, the general features in the climate models well follow those in the observation to show the dipole pattern of a barotropic high-latitude blocking and a baroclinic coastal trough, leading to the Arctic cold surges with the strong northerly wind originated from the Arctic Sea. In both of the observation and climate models, the blocking cold surges tend to be more intense and last longer compared to the wave-train type.

• Journal of Astronomy and Space Sciences
• /
• 제34권4호
• /
• pp.343-352
• /
• 2017

A space plasma facility has been operated with a back-diffusion-type plasma source installed in a mid-sized vacuum chamber with a diameter of ~1.5 m located in Satellite Technology Research Center (SaTReC), Korea Advanced Institute of Science and Technology (KAIST). To generate plasma with a temperature and density similar to the ionospheric plasma, nickel wires coated with carbonate solution were used as filaments that emit thermal electrons, and the accelerated thermal electrons emitted from the heated wires collide with the neutral gas to form plasma inside the chamber. By using a disk-type Langmuir probe installed inside the vacuum chamber, the generation of plasma similar to the space environment was validated. The characteristics of the plasma according to the grid and plate anode voltages were investigated. The grid voltage of the plasma source is realized as a suitable parameter for manipulating the electron density, while the plate voltage is suitable for adjusting the electron temperature. A simple physical model based on the collision cross-section of electron impact on nitrogen molecule was established to explain the plasma generation mechanism.

• 한국지진공학회논문집
• /
• 제10권1호
• /
• pp.25-32
• /
• 2006

본 연구에서는 1994년 미국 노스리지 지진 이전에 건설된 기존 철골 건물의 용접형 철골 박스기둥과 보 접합부의 내진성능을 반복재하 실험에 의해 평가하였다. 실험결과에 의하면 노스리지 지진 이전 접합상세를 갖는 박스기둥과 보 접합부에서도 H-형강 기둥과 보 접합부 실험결과와 유사하게 취성파단이 발생하였다. 하지만, 박스기둥과 보 접합부에서의 플랜지 응력전달 경로가 H-형강 기둥과 보 접합부에서의 것과 상당한 차이가 있고 또한 박스기둥의 형상에 따라 균열 전파의 형태가 다를 수 있다는 것이 밝혀졌다. 따라서 용접형 철골 박스기둥과 보 접합부의 내진성능을 향상시키기 위해서는 H-형강 기둥과 보 접합부에 대한 기존 연구결과를 그대로 적용하기보다는 박스기둥에 적합한 접합부의 보강상세 개발이 요구된다.