• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.2
• /
• pp.51-58
• /
• 2015

In this study, we developed an automated non-contact thickness measurement machine that continuously and precisely measures the thickness and warp of a PCB product using a laser sensor. The system contains a measurement part to measure the thickness in real time automatically according to the set conditions with an alignment supply unit and unloading unit to separate OK and NG products. The measurement machine was utilized to evaluate the performance at each step to minimize measurement error. At the zero setting for the initial setup, the standard deviation of the 216 samples was determined to be $5.52{\mu}m$. A measurement error of 0.5mm and 1.0mm as a standard sample in the measurement accuracy assessment was found to be 2.48% and 2.28%, respectively. In the factory acceptance test, the standard deviation of 1.461mm PCB was measured as $28.99{\mu}m$, with a $C_{pk}$ of 1.2. The automatic thickness measurement machine developed in this study can contribute to productivity and quality improvement in the mass production process.

• IE interfaces
• /
• v.25 no.1
• /
• pp.40-51
• /
• 2012

Today, many manufacturing companies realize that collaboration is crucial for their survival. Especially, in the perspective of quality, the importance of collaboration is emphasized because economic loss increases exponentially while defective parts go through the process in supply chain. However, the manufacturing companies are facing two main difficulties in implementing collaborative relationships with their suppliers. First, it is difficult for the suppliers to produce reliable products due to their obsolete facilities. The problem gets worse for second- or third-tire vendors. Second, the companies experience the lack of universally understandable set of terminology and effective methodologies for knowledge representation. Ontology is one of the best approaches to expressing and processing a domain knowledge. In this paper, we propose the manufacturing ontology-based quality prediction framework to represent and share the knowledge of industrial environment and to predict product quality in manufacturing processes. In addition, we develop the ontology-based quality prediction system based on the proposed framework. We carried out a series of experiments for an injection molding process at an automotive part supplier. The experimental results demonstrated that the proposed framework and system can be successfully applicable in manufacturing industry.

• The Journal of Information Systems
• /
• v.9 no.1
• /
• pp.61-86
• /
• 2000

CALS(Commerce At Light Speed) which originated in the early 1980's in the military sector is now an integral component in our global strategy to further heighten competitiveness. Through integration and streamlining of production, distribution, technical information and management, CALS will certainly lead the world out of these economically challenging times and into new global prosperity. However, not much effort have been focused on the development and diffusion issues of component technologies such as ERP/SCM(Enterprise Resourses Planning/supply Chain Management), PDM(Product Data Management), and BPR(Business Process Reengineering) related with the CALS in electronic industry. Therefore, the purpose of this study is to analyze the advancing status and to present suggestions for the development of the CALS in electronic industry. In order to achieve the purpose, the case study has been conducted using the questionaries on the end-users and the interviews on the managers in the CALS area. The case study cover 57 users of the CALS for the three outstanding electronics(L, S, and D Electronics) in Korea. The questionaries include five success measures and eleven diffusion factors for the component technologies such as ERP/SCM, PDM, and BPR. In summary, the CALS will serve as the bases for exciting corporated innovations and the common business framework which facilitates the realization of Virtual Enterprise and Electronic Commerce in the 21st century.

• Knowledge Management Research
• /
• v.12 no.4
• /
• pp.17-40
• /
• 2011

This study examines the differences of enacting models and influential causes of benefit-sharing practices between Korean automobile networks and the Japanese networks. The case study method is chosen for this research because only small numbers of supply networks adopt benefit-sharing practices. I employ semi-structured interviews with managers from four automobile manufacturers and eight of their suppliers in South Korea and Japan. I find that Japanese automobile networks have adopted a higher level of trust-demanding, with a higher level of value-creating models such as supplier development, joint-new-product development. Whereas, the Korean networks have adopted the lower trust demanding, also less profitable models such as supplier's suggestion and buyer's suggestion. In terms of work-related cultural values, I find that Japanese networks emphasized collectivism. Both buyers and suppliers in the Japanese networks are supposed to have common causes. In contrast, Korean networks emphasized individualism. Both buyers and suppliers of Korea generally do not identify that they are common group members with a common cause. I also find that a slight differences of the enacting models and the causes between foreign-owned networks and domestic-owned networks within each country. Foreign-owned networks have adopted lower trust demanding, also less profitable models. The findings demonstrate that the cultural values have a decisive influence on the adoption of benefit sharing models for the networks in Japan, and South Korea.

• Journal of Applied Biological Chemistry
• /
• v.44 no.4
• /
• pp.159-162
• /
• 2001

Plant stress incurred by flooding was studied in terms of oxidative stress, using greened rice seedlings subjected to a complete submergence followed by re-exposure to air under illumination ($30W/m^2$). It appeared that shoot tissues of the seedlings suffered oxygen deficiency during the flooding treatment, pertinent to the general concept. Interestingly enough, however, membrane peroxidation in shoots was enhanced by the submergence, as assessed by the content of 2-thiobarbituric acid-reactive substances (TBARS), and the re-aeration resulted in a rapid reduction of TBARS content. Such pattern of response was also seen in the change in the steady state level of $H_2O_2$. In contrast, superoxide dismutase and glutathione reductase that are involved in the detoxifying processes of superoxide in plant cells were significantly activated only during the re-aeration. These results allowed us to suggest the followings as a working hypothesis. Photorespiration-linked production of $H_2O_2$ may largely contribute to the increase in $H_2O_2$ level as well as TBARS production in shoots during the submergence. An abrupt re-supply of $CO_2$ by the re-aeration brings the photosynthetic apparatus back to full operation, suppressing photorespiration and probably causing a momentary, excess formation of superoxide and its dismutation product through side reaction, which gives rise to activating substrate-inducible antioxidative enzymes.

• Journal of the Korea Furniture Society
• /
• v.20 no.1
• /
• pp.82-94
• /
• 2009

In this study, I suggest dyed-Glued laminated woods by using birch woods which are relatively cheaper than others. Since the dyed-Glued laminated woods which have the various colors to satisfy people's tastes and the dignified grains in the old woods enable us to product freely, these can provide us with stability of supply through replacing rare materials. The making wooden furniture designed with dyed-Glued laminated woods has these following characteristics. (1) This method which uses various colored woods can fulfill consumers' tastes through dyeing wooden plates, instead of using domestic woods which have limited colors-white, yellow and black. (2) Gathering wooden plates made by setting them into various frames enables us to get in large quantities of the materials with good grains, which we can only take from old woods. (3) Producing culture products using various colors and grains has enabled us to satisfy consumers and to create pro-environmental pieces. In conclusion, this study can be an alternative idea to forest resources which have been decreasing, and be an application method of using cheaper birch woods as well. Gathering and dyeing wooden plates might bring about the economic effect and be of much help to the expansion as furniture materials as well as interior ones.

• 전자공학회논문지 IE
• /
• v.44 no.2
• /
• pp.14-20
• /
• 2007

This paper presents quaternary D flip-flop with advanced performance. Quaternary D flip-flop is composed of the components such as thermometer code output circuit, EX-OR gate, bias inverter, transmission gate and binary D flip-flop circuit. The designed circuit is simulated by HSPICE in $0.35{\mu}m$ one-poly six-metal CMOS process parameters with a single +3.3V supply voltage. In the simulations, sampling frequencies is measured around 100MHz. The PDP parameters and FOM we estimated to be 59.3fJ, 33.7 respectively.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.6
• /
• pp.630-633
• /
• 2001

This paper propose electronic speckle pattern interferometry(ESPI) for reliability evaluation of electronic device. Especially, vibration problem in a fan of air conditioner, motor of washing machine and etc. is important factor to design the devices. But, it is difficult to apply previous method, accelerometer to the devices with complex geometry. ESPI, non-contact measurement technique applies a commercial fan of air conditioner to vibration analysis. Vibration mode shapes, natural frequency and the range of the frequency are decided and compared with that of FEM analysis. In mechanical deign of new product, ESPI adds weak point of previous method to supply effective design information.

• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 2003.10a
• /
• pp.107.1-107
• /
• 2003

The fermentation process and subsequent processing determine the efficacy of a bioherbicide propagule. Large batches of biomass of the mycoherbicide agent for white clover, Sclerotium sp.(BWC98-105) was produced in simple liquid fermentator in 5 gallons vessels(Model No. 8087, Dabo Inc., Korea) with oxygen supply(DPH16000, FineTech Inc., Korea) simulating industrial conditions by utilizing commercially available, inexpensive ingredients (10 ％ rice bran), The maximum biomass yield of Sclerotium sp.(BWC98-105) was obtained after 5 days of air pumped incubation at room temperature condition(22-28$^{\circ}C$). By using this simple facility, it could get fragmented or proliferated greatly and attained maximum mycelia biomass. The biomass of mycoherbicide agent consisted of hyphae devoid of spores. Biomass mycelia of the fungus 99％ survival at room temperature after 2 me. A thorough understanding of the effects of fermentation and formulation on viability and virulence is required to guide these processes. After an economical yield level of bioherbicide propagule has been achieved in a fermentation process, formulation becomes a critical factor which influences product efficacy. Because the fermentation must be stopped at a point when virulence/viability are optimum, the live bioherbicide propagule must be stabilized, formulated, and packaged.

• BMB Reports
• /
• v.45 no.8
• /
• pp.427-432
• /
• 2012

Primary cilia, single hair-like appendage on the surface of the most mammalian cells, were once considered to be vestigial cellular organelles for a past century because of their tiny structure and unknown function. Although they lack ancestral motility function of cilia or flagella, they share common ground with multiciliated motile cilia and flagella on internal structure such as microtubule based nine outer doublets nucleated from the base of mother centrioles called basal body. Making cilia, ciliogenesis, in cells depends on the cell cycle stage due to reuse of centrioles for cell division forming mitotic spindle pole (M phase) and assembling cilia from basal body (starting G1 phase and maintaining most of interphase). Ciliary assembly required two conflicting processes such as assembly and disassembly and balance between these two processes determines the length of cilia. Both process required highly conserved transport system to supply needed substance to grow tip of cilia and bring ciliary turnover product back to the base of cilia using motor protein, kinesin and dynein, and transport protein complex, IFT particles. Disruption of ciliary structure or function causes multiple human disorder called ciliopathies affecting disease of diverse ciliated tissues ranging from eye, kidney, respiratory tract and brain. Recent explosion of research on the primary cilia and their involvement on animal development and disease attracts scientific interest on how extensively the function of cilia related to specific cell physiology and signaling pathway. In this review, I introduce general features of primary cilia and recent progress in understanding of the ciliary length control and signaling pathways transduced through primary cilia in vertebrates.