• 소성∙가공
• /
• 제15권3호
• /
• pp.183-188
• /
• 2006

Heat transfer coefficients have great influence on finite element analysis results in elevated temperature forging processes. Experimentally calculated contact heat transfer coefficient is not suitable for one-time finite element analysis because analyzed temperature will be appeared to be too low. To get contact heat transfer coefficient for one-time finite element analysis, tool temperature in operation was measured with thermocouple and repeated finite element analysis was performed with experimentally calculated contact and cooling heat transfer coefficient. Surface temperature of active tool was obtained comparing measurement and analysis results. Contact heat transfer coefficient for one-time finite element analysis was achieved analyzing surface temperature between repeated finite element analysis and one-time finite element analysis results.

• 한국레이저가공학회:학술대회논문집
• /
• 한국레이저가공학회 2005년도 추계학술발표대회 논문집
• /
• pp.32-36
• /
• 2005

• 한국레이저가공학회:학술대회논문집
• /
• 한국레이저가공학회 1998년도 추계학술발표대회 초록개요집
• /
• pp.29-32
• /
• 1998

• The Journal of the Acoustical Society of Korea
• /
• 제18권3E호
• /
• pp.37-43
• /
• 1999

In this paper, we present a new technique for the optimal local decomposition of convex structuring elements on a hexagonal grid, which are used as templates for morphological image processing. Each basis structuring element in a local decomposition is a local convex structuring element, which can be contained in hexagonal window centered at the origin. Generally, local decomposition of a structuring element results in great savings in the processing time for computing morphological operations. First, we define a convex structuring element on a hexagonal grid and formulate the necessary and sufficient conditions to decompose a convex structuring element into the set of basis convex structuring elements. Further, a cost function was defined to represent the amount of computation or execution time required for performing dilations on different computing environments and by different implementation methods. Then the decomposition condition and the cost function are applied to find the optimal local decomposition of convex structuring elements, which guarantees the minimal amount of computation for morphological operation. Simulation shows that optimal local decomposition results in great reduction in the amount of computation for morphological operations. Our technique is general and flexible since different cost functions could be used to achieve optimal local decomposition for different computing environments and implementation methods.

• Journal of Information Processing Systems
• /
• 제17권5호
• /
• pp.918-932
• /
• 2021

Evaluation of the collaboration of the upstream and downstream enterprises in the manufacturing supply chain is important to improve their synergistic effect. From the supply chain perspective, this study establishes the evaluation model of the manufacturing enterprise collaboration on the basis of fuzzy entropy according to synergistic theory. Downstream enterprises carry out coordinated capital, business, and information flows as subsystems and research enterprises as composite systems. From the three subsystems, the collaboration evaluation index is selected as the order parameter. The compound fuzzy matter-element matrix is established by using its improved algorithm. Subordinate membership and standard deviation fuzzy matter-element matrixes are constructed. Index weight is determined using the entropy weight method. The closeness of each matter element is then calculated. Through a representative of the home appliance industry, namely, Gree Electric Appliances Inc. of Zhuhai, empirical analysis of data in 2011-2017 from the company and its upstream and downstream enterprise collaboration shows a good trend, but the coordinated development has not reached stability. Gree Electric Appliances Inc. of Zhuhai need to strengthen the synergy with upstream and downstream enterprises in terms of cash, business, and information flows to enhance competitiveness. Experimental results show that this method can provide precise suggestions for enterprises, improve the degree of collaboration, and accelerate the development and upgrading of the manufacturing industry.

• 대한전자공학회논문지
• /
• 제27권3호
• /
• pp.108-115
• /
• 1990

고속 퓨리어변화(Fast Fourier Transform)연산용 2차원 시스토릭 어레이의 기본 구성요소인 단위 처리요소(Unit processing element)를 직접회로로 설계, 제작하고 제작된 칩을 평가하였다. 설계된 칩은 FFT 연산을 위한 데이타셔플링 기능과 반쪽 버터플라이 연산기능을 수행한다. 약 6,500여개의 트랜지스터로 구성된 이 칩은 표준셀 방식으로 설계되었으며, 2미크론 이중 금속 P-Well CMOS 공정으로 제작되었다. 제작된 칩을 웨이퍼 상태로 프로브카드를 이용하여 평가하였으며 그 결과, 20MHz 클럭 주파수에서 반쪽 버터플라이 연산이 0.5${\mu}sec$에 수행됨을 확인하였다. 본 논문에서 설계, 제작된 칩을 이용하여 1024-point FFT를 연산하는 경우 11.2${\mu}sec$의 시간이 소요될 것으로 예상된다.

• 소성∙가공
• /
• 제21권3호
• /
• pp.172-178
• /
• 2012

We performed a shot peening test and used a 2-D finite element model which predicts the compressive residual stress distribution below the material's surface. In this study, the concept of 'impact cycle' is introduced to account for the irregularity in the shot's impact position during testing. The impact cycle was imbedded in the finite element model. In the shot peening test, shot bombarded a type-A Almen strip surface with different impact velocities. To verify the proposed finite element model, we compared the deformed cross sectional shape of the Almen strips with the shapes computed by the proposed finite element model. Good agreement was noted between measurements and the finite element model predictions. With the verified finite element model, a series of finite element simulations was conducted to compute the residual stress distribution below the material's surface and the characteristics of these distributions are discussed.

• 소성∙가공
• /
• 제26권5호
• /
• pp.293-299
• /
• 2017

In this paper, finite element stamping analysis was carried out for the front lower arm to examine the applicability of solid element with damage theory to predict shear fracture phenomena induced by sheared edge as well as deformation mechanisms. Mechanical properties related to deformation and damage theory were determined from tensile test. Shear fracture was predicted by normalized Cockcroft-Latham model with initial imposition of the damage value along the sheared edge. Simulation results illustrated that the analysis with solid element and damage theory predicted edge profile, strain distribution, and forming load more accurately than the analysis with shell element. Simulation with solid element can also predict the shear fracture more exactly comparing to analysis with shell element and forming limit curve.

• 한국지능시스템학회논문지
• /
• 제19권2호
• /
• pp.230-235
• /
• 2009

본 논문은 3차원구조물의 유한요소해석을 위한 자동 유한요소 생성에 관한 것으로 퍼지이론과 버블요소 생성기법, 상용 솔리드모델러로 구성되어진다. 새로운 요소생성과정은 (a) 해석모델인 형상모델링 정의, (b) 버블생성, 그리고 (c) 요소생성으로 이루어진다. 형상모델링에는 상용 솔리드모델러를 이용하였으며 버블은 각 지점에서의 버블간격함수에 의해 생성되어진다. 버블간격 함수는 지식처리수법에 의해 조절되어 진다. 요소생성을 위해서는 기본적으로 데로우니방법을 도입하였다. 이러한 3차원 구조물에 대한 유한요소의 자동생성은 해석을 위해 큰 잇점이 있다. 실제적인 현 시스템의 효용성을 검증하기위해 3차원 형상에 대한 예를 제시하였다.

• 소성∙가공
• /
• 제4권1호
• /
• pp.39-47
• /
• 1995

The compression molding of SMC (sheet molding compund) at room temperature was analyzed based on rigid-viscoplastic approach by three dimensional finite element program. The developed program was tested by solving the three dimensional compression of wedge type specimens of aluminum alloys at various processing conditions. The simulation results were compared well to the experimental results available in the literature. based on this comparison the program was proved to be valid and was further applied in solving compression molding of SMC, which is a thermosetting material reinforced with chopped fiber glass. To investigate the effects of friction conditions and mold closing speeds for compression molding of SMC charge at room temperature, compressions of the cylindrical and rectangular shaped SMC were analyzed for various friction conditions and mold closing speeds. The calculated load values were compared to the experimental results for the compression molding of cylindrical specimen.