• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.433-440
• /
• 2006

A fiber processing method, which might be an alternative for conventional refining process, was introduced. The method consists of repetitive, gentle, mechanical impacts on fiber, and ensued fiber uncurling process. This method was very effective for OCC and BCTMP for increasing WRVs (water retention value) while keeping fiber lengths from shortening. For OCC and BCTMP, gentle mechanical impacts on fibers using Hobart mixer increased breaking lengths and tear strengths simultaneously at fast drainage level, and straightening fibers using kady mill increased those strength properties further. For SwBKP and HwBKP, only mechanical impacts using the mixer were effective on increasing tensile and tear strength at fast drainage, but not kady mill treatment. The strength increases of BCTMP by this alternative fiber processing method were exceptionally high. An extensive engineering development should be followed to actualize this fiber processing mechanism in an energy-effect way.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 추계학술대회 논문집
• /
• pp.331-337
• /
• 2013

Acoustic Emission technique is widely applied to develop the early fault detection system, and the problem about a signal processing method for AE signal is mainly focused on. In the signal processing method, envelope analysis is a useful method to evaluate the bearing problems and Wavelet transform is a powerful method to detect faults occurred on rotating machinery. However, exact method for AE signal is not developed yet. Therefore, in this paper two methods which are Hilbert transform and DET for feature extraction. In addition, we evaluate the classification performance with varying the parameter from 2 to 15 for feature selection DET, 0.01 to 1.0 for the RBF kernel function of SVR, and the proposed algorithm achieved 94% classification accuracy with the parameter of the RBF 0.08, 12 feature selection.

• Journal of Information Processing Systems
• /
• 제16권4호
• /
• pp.795-808
• /
• 2020

Due to the poor evaluation indexes such as detection accuracy and recall rate when Yolov3 network detects aircraft in remote sensing images, in this paper, we propose a remote sensing image aircraft detection method based on machine vision. In order to improve the target detection effect, the Inception module was introduced into the Yolov3 network structure, and then the data set was cluster analyzed using the k-means algorithm. In order to obtain the best aircraft detection model, on the basis of our proposed method, we adjusted the network parameters in the pre-training model and improved the resolution of the input image. Finally, our method adopted multi-scale training model. In this paper, we used remote sensing aircraft dataset of RSOD-Dataset to do experiments, and finally proved that our method improved some evaluation indicators. The experiment of this paper proves that our method also has good detection and recognition ability in other ground objects.

• 정보처리학회논문지D
• /
• 제11D권7호
• /
• pp.1385-1398
• /
• 2004

본 논문에서는 시계열 데이터베이스에서 타임 워핑 하의 서브시퀀스 매칭을 효과적으로 처리하는 방안에 관하여 논의한다. 타임 워핑은 시퀀스의 길이가 서로 다른 경우에도 유사한 패턴을 갖는 시퀀스들을 찾을 수 있도록 해 준다. 먼저, 사전 실험을 통하여 기존의 기본적인 처리 방식인 Naive-Scan의 성능 병목이 CPU 처리 과정에 있음을 지적하고, Naive-Scan의 CPU 처리 과정을 최적화하는 새로운 기법을 제안한다. 제안된 기법은 질의 시퀀스와 서브시퀀스들간의 타임 워핑 거리들을 계산하는 과정에서 발생하는 중복 작업들을 사전에 제거함으로써 CPU 처리 성능을 극대화한다. 제안된 기법이 착오 기각을 발생시키지 않음과 Naive-Scan을 처리하기 위한 최적의 기법임을 이론적으로 증명한다. 또한, 제안된 기법을 기존의 타임 워핑 하의 서브시퀀스 매칭 기법인 LB-Scan과 ST-Filter의 후처리 정량적으로 검증한다. 실험 결과에 의하면, 기존의 타임 워핑 하의 서비시퀀스 매칭을 위한 모든 기법들이 제안된 최적화 기법에 의하여 성능이 개선되는 것으로 나타났다. 특히, Nsive-Scan은 최적화 기법의 적용 전에는 가장 떨어지는 성능을 보였으나, 최적화 기법의 적용 후에는 모든 경우에서 ST-Filter나 LB-Scan을 사용한 경우보다 더 좋은 성능을 보였다. 이것은 성능 병목인 CPU 처리 과정을 최적화함으로써 기존 기법들인 Naive-Scan, LB-Scan, ST-Filter 간의 처리 성능 상의 순위 역전 현상이 발생하였음을 보이는 매우 중요한 결과이다.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1995년도 제12회 음성통신 및 신호처리 워크샵 논문집 (SCAS 12권 1호)
• /
• pp.33-41
• /
• 1995

We proposed the approach method of neural network for signal processing, especially speech signal processing and reviewed the algorithms for several neural networks which are used for many alppication field in speech processing. Finally, investigated the trends in neural network method through 3 conference jounal and the ASK jounal in 1994.

• 항공우주시스템공학회지
• /
• 제13권5호
• /
• pp.57-64
• /
• 2019

항공전자 시스템은 유지비용 감소 및 운용성능 향상을 위하여 기능을 모듈화, 통합화 설계를 적용한 모듈 통합형 항공 전자 시스템으로 개발 되어지고 있으며, 다양한 임무 제어 수행을 위해서 가상화 기술을 적용한 파티셔닝 운용체제를 적용 하고 있다. 가상화 기술을 적용 할 경우 CPU 처리 부하 분배는 중요한 고려 대상이며, 특히 입출력 처리 시간에 대한 불확실성은 안정성 있는 항공전자 시스템 설계에 있어 위험 요소 중 하나이다. 본 논문에서는 유즈케이스를 통해 입/출력 처리 방식에 따르는 CPU 처리 부하량을 비교 분석하여 공간적/시간적 파티셔닝 예시에 적용함으로써 입/출력 처리 방식의 영향성을 검토하고자 한다.

• ETRI Journal
• /
• 제39권1호
• /
• pp.41-50
• /
• 2017

In connection-oriented data transport services, data loss can occur when a service experiences a problem in its end-to-end path. To resolve the problem promptly, the data transport systems providing the service must quickly modify their internal configurations, which are distributed among different locations within each system. The configurations are modified through a series of problem (event) handling procedures, which are carried out by multiple control processors in the system. This paper proposes a provisioning-to-signaling method for inter-control-processor messaging to improve the time efficiency of event processing. This method simplifies the sharing of the runtime event, and minimizes the time variability caused by the amount of event data, which results in a decrease in the latency time and an increase in the time determinacy when processing global events. The proposed method was tested for an event that required 4,000 internal path changes, and was found to lessen the latency time of global event processing by about 50% compared with the time required for general methods to do the same; in addition, it reduced the impact of the event data on the event processing time to about 30%.

• 한국수산과학회지
• /
• 제44권3호
• /
• pp.308-317
• /
• 2011

A MBES (multibeam echo sounder) survey around Yokji Island, Korea, was conducted to find an effective method for removing error data. Two post-processing software programs, PDS2000 (RESON) and HIPS (CARIS), were used to remove the error data using an interactive editing method and the CUBE algorithm filter. The post-processing with the PDS2000 and HIPS programs, using the interactive editing method, took 120 and 168 hours, respectively, and there was little difference in the seafloor images. The processing time of the PDS2000 and HIPS programs using the CUBE algorithm filter was 36 and 60 hours, respectively. Nevertheless, there was little difference in the seafloor images because of differences in the factor parameters in each of the post-processing programs. Therefore, post-processing using CUBE filtering can save time in data processing and provide consistent results, excluding the subjective decisions of the operator. This method is more effective than other methods for rejecting erroneous multibeam echo sounder data.

• Journal of Information Processing Systems
• /
• 제13권4호
• /
• pp.805-817
• /
• 2017

Cross-lingual query expansion is usually based on the relationship among monolingual words. Bilingual comparable corpus contains relationships among bilingual words. Therefore, this paper proposes a method based on these relationships to conduct query expansion. First, the word vectors which characterize the bilingual words are trained using Chinese and Thai bilingual comparable corpus. Then, the correlation between Chinese query words and Thai words are computed based on these word vectors, followed with selecting the Thai candidate expansion terms via the correlative value. Then, multi-group Thai query expansion sentences are built by the Thai candidate expansion words based on Chinese query sentence. Finally, we can get the optimal sentence using the Chinese and Thai query expansion method, and perform the Thai query expansion. Experiment results show that the cross-lingual query expansion method we proposed can effectively improve the accuracy of Chinese and Thai cross-language information retrieval.

• 한국CDE학회논문집
• /
• 제14권5호
• /
• pp.291-296
• /
• 2009

This paper presents a post-processing algorithm for 5-axis machines with three rotary axes (3R-2L type). 5-axis machining needs the postprocessor for converting cutter location (CL) data to machine control (NC) data. The existing methods for post-processing use inverse kinematics equations from for-ward kinematics. However in case of 5-axis machines with three rotary axes, the inverse kinematics equations are not induced directly since the forward kinematics equations are non-linear. In order to get the joint values from the forward kinematics equations, previous algorithms use numerical method for the post-processing, which needs searching algorithms with computation time and may result in fail. This paper proposes a geometric method for the post-processing of 3 rotary type 5-axis machines. Our algorithm has three advantages: first, it does not need establishing forward kinematics equations. Second, it is reliable method that eliminates any numerical methods for the inverse kinematics, resulting in the exact solution. Finally, the proposed algorithm can also be applied to 2R-3L type of 5-axis machines.