• 전기학회논문지
• /
• 제60권3호
• /
• pp.669-673
• /
• 2011

This study explores the numerical analysis method of fluid dynamics in the reaction section to improve the gas processing efficiency in the hazardous gas removal by atmospheric thermal plasma. This study also intends to contribute in technology advance to improve the processing efficiency and make the process more stable. Numerical analysis of temperature distribution in the reaction section dependent on the change in flow velocity of Ar and plasma temperature change, which are major control variables in the cracking process of HFC-23 using arc plasma, was done. The characteristic of incoming oxygen by temperature suggested that when temperature increased to 1600K, 1700K, 1800K respectively, the range of cracking temperature 1500K increased to 75.0%, 83.3%, 90.2% respectively. The temperature change of Ar by velocity change was widest in the area higher than 1500K when the velocity was 2.5m/s; however, since there was no big difference when the velocity was 2m/s, it is believed that 2 m/s would be most proper.

• 소성∙가공
• /
• 제33권5호
• /
• pp.309-314
• /
• 2024

Supersonic aircraft and missiles often encounter damage issues due to high-speed collisions with small objects such as ice particles and water droplets. This can significantly impact the safety and performance of these vehicles, making the assessment and development of collision testing crucial. Existing collision testing methods have relied on equipment such as gas guns, which utilize high pressure. However, most accelerators for projectiles are large-scale devices designed for weaponry and high-pressure gases, rendering them inaccessible and unsuitable for laboratory use. Therefore, there is a need for research into easily accessible and economically efficient testing devices at the laboratory level. An impact tester can launch a projectile with a velocity of 100 m/s using low-pressure compressed air at approximately 10 bar. The velocity of the impact tester projectile is determined by the pressure within the chamber, friction, and the length of the barrel. In this study, computational fluid dynamics was utilized to define friction coefficients that match experimental results based on projectile weight, enabling accurate prediction of velocity. The resulting data provides practical and effective insights for the design of impact testers, utilizing the defined friction coefficients to understand and predict complex physical phenomena.

• 한국미생물·생명공학회지
• /
• 제17권1호
• /
• pp.19-23
• /
• 1989

생쥐 하이브리도마 세포를 주사한 생쥐의 복수로부터 대장암에 대한 단세포군 항체 IgM을 분리 정제해 내기 위하여 히드록실 아파타이트 크로마토그라피와 겔 여과 크로마토그라피를 연속적으로 사용하는 2단계 분리 정제 시스템을 개발하였다. 히드록실 아파타이트 크로마토그라피 단계에서는 단백질 밴드의 희석현상을 탈착제인 인산 나트륨 완충액의 농도구배와 유속을 제어함에 의하여 줄일 수 있었는 바 이들 변수들의 최적치는 5.92$\times$$10^{-3}$M/cm및 0.2$m\ell/\textrm{cm}^2$/min으로 각각 나타났다. 겔 여과 크로마토그라피를 제 2단계로 사용함으로 써 SDS-PAGE 밴드들의 은착색으로 판단된 바 99.99% 이상의 순도를 갖는 단세포군 항체 단백질을 분리 정제해 낼 수 있었다.

• 한국산학기술학회논문지
• /
• 제20권4호
• /
• pp.523-533
• /
• 2019

엔지니어링과 IT기술의 융합은 학문적 연구뿐 아니라 산업에도 많은 변화를 가져오고 있다. 특히 컴퓨터 시뮬레이션 기술은 실제 물리현상을 정확히 모사하고 실시간으로 분석할 수 있는 수준으로 발전했다. 본 논문에서는 산업에서 주로 활용되는 유체해석(CFD: Computational Fluid Dynamics) 기술과 최신 가시화 기술로 떠오르고 있는 증강현실을 활용한 후처리기에 대해 기술한다. 유체해석 시뮬레이션 결과를 증강현실기술을 활용하여 가시화하는 연구가 활발히 진행되고 있으나, 결과 데이터의 사이즈가 큰 특성상 데스크탑 환경에서 기사화하는 연구에 한정되어 실제 공간에서 검토가 필요한 유체해석 시뮬레이션분야에서 활용이 제한된다. 본 논문에서는 이러한 문제점을 해결하기 위한 방법에 대해 논의한다. 이를 위해 후처리 과정에서는 유체해석결과를 분석한 후, 모바일 환경에서 원활한 구동을 지원하기 위한 데이터 경량화(70% 이상) 작업을 수행하며, 가시화 과정에서는 경량화된 데이터를 이용하여 클라우드 컴퓨팅을 활용한 실시간 추적 작업과 함께 유체해석결과를 화면에 정합하여 가시화 한다. 이를 통해 사용자는 시뮬레이션이 수행된 다양한 공간에서 유체해석결과를 효과적이고 몰입감있게 검토/분석 할 수 있다.

• 한국응용과학기술학회지
• /
• 제31권1호
• /
• pp.143-150
• /
• 2014

최근 낮은 표면장력, 높은 확산계수, 가스와 같은 낮은 점도, 그리고 액체와 유사한 밀도를 갖는 초임계 유체의 장점을 이용하여 여러 가지 물질의 합성이나 응용 공정에 초임계 유체를 이용하고 있다. 초임계 유체를 이용하여 복합체 제조 시 기존의 용융공정에 비해서 분자들의 움직임이 활발하게 이루어 질 수 있어서 물성의 향상을 기대할 수 있다. 또한 클레이가 고농도로 함유된 마스터 배치를 쉽게 제조할 수 있으며, 기존의 유기 용매를 사용하여 복합체를 제조할 때보다 잔존 용매를 쉽게 제거할 수 있다는 장점을 가지고 있다. 따라서 본 연구에서는 이러한 초임계 이산화탄소를 이용하여 폴리에틸렌옥사이드/클레이 나노복합체를 제조하였다. 또한 본 연구의 목적은 초임계 상태에서 분자들의 활발한 움직임을 기대할 수 있으므로 고분자가 용해되고 클레이 층상으로 효과적으로 삽입되어 복합체의 열적 특성 및 다른 여러 가지 물성을 증가시키는 데 있다. 복합체 제조 후 XRD, TGA, 그리고 DSC를 이용하여 복합체의 특성을 분석 했다. 그 결과 용융방법으로 제조한 복합체보다 열 안정성이 향상되었으며, 클레이 층상 거리도 더 많이 벌어짐을 확인할 수 있었다.

• 한국농공학회논문집
• /
• 제47권5호
• /
• pp.27-39
• /
• 2005

In the recent design of high ductile fiber-reinforced ECC (engineered cementitious composite), optimizing both processing and mechanical properties for specific applications is critical. This study presents an innovative method to develop new class ECCs, which possess the different fluid properties to facilitate diverse types of processing (i.e., self-consolidating or shotcrete processing) while maintaining ductile hardened properties. In the material design concept, we employ a parallel control of fresh and hardened properties by using micromechanics and cement rheology. Control of colloidal interaction between the particles is regarded as a key factor to allow the performance of the specific processing. To determine how to control the particle interactions and the viscosity of cement suspension, we first introduce two chemical admixtures including a highly charged polyelectrolyte and a non-ionic polymer. Optimized mixing steps and dosages we, then, obtained within the solid concentration predetermined based on micromechanical principle. Test results indicate that the rheological properties altered by this approach were revealed to be highly effective in obtaining the desired function of the fresh ECC, allowing us to readily achieve hardened properties, represented by pseudo strain-hardening behavior in uniaxial tension.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.509-515
• /
• 2001

In a square cavity, the flow phenomena in the surrounding of the bubble attached at the upper cooled solid wall were studied by using a thermo-sensitive liquid-crystal tracer and image processing techniques. This method offers the advantage of measuring the entire flow field in a selected plane within the fluid at a given instant of time in contrast to point by point method like T/C. Quantitative data of the temperature were obtained by applying a colour-image-processing to the. visualized image. As the growing of a bubble, In a bubble size appears the flow phenomena which the direction of flow is reversed in the entire temperature and flow field. The observed phenomena are described with regard to thermocapillary convection.

• International Journal of Precision Engineering and Manufacturing
• /
• 제8권1호
• /
• pp.11-15
• /
• 2007

Composite materials are widely used to make all kinds of machine parts, internal and structural materials of cars, aerospace components, building structures, ship materials, sporting goods and others, It is worth while to use composite space substitute material in various applications when compared with others. But the use of composite material is limited in the field of the mechanical processing because of the difficulties in processing. Thus, it is proved that the surface is rough at the in and out sections of the hole processing when the GFRP is machined with HSS drill in the vertical machining center. And it is observed that the more it is processed, the more the fluid type long chip is changed into the powdered chip.

• Journal of Biosystems Engineering
• /
• 제41권2호
• /
• pp.116-125
• /
• 2016

Background: Microfluidics is of considerable importance in food and agricultural industries. Microfluidics processes low volumes of fluids in channels with extremely small dimensions of tens of micrometers. It enables the miniaturization of analytical devices and reductions in cost and turnaround times. This allows automation, high-throughput analysis, and processing in food and agricultural applications. Purpose: This review aims to provide information on the applications of microfluidics in the agro-food sector to overcome limitations posed by conventional technologies. Results: Microfluidics contributes to medical diagnosis, biological analysis, drug discovery, chemical synthesis, biotechnology, gene sequencing, and ecology. Recently, the applications of microfluidics in food and agricultural industries have increased. A few examples of these applications include food safety analysis, food processing, and animal production. This study examines the fundamentals of microfluidics including fabrication, control, applications, and future trends of microfluidics in the agro-food sector. Conclusions: Future research efforts should focus on developing a small portable platform with modules for fluid handling, sample preparation, and signal detection electronics.

• 대한기계학회논문집B
• /
• 제25권12호
• /
• pp.1879-1886
• /
• 2001

n a enclosed square cavity occurred B nard convection, the flow phenomena in the surrounding of the bubble attached at the upper cooled solid wall were studied by using a thermo-sensitive liquid-crystal tracer and image processing techniques. This method offers the advantage of measuring the entire flow field in a selected plane within the fluid at a given instant of time in contrast to point by point method like T/C. Quantitative data of the temperature were obtained by applying a colour-image-processing to the visualized image. As the flowing in a bubble, In a bubble size appears the flow phenomena which the direction of flow is reversed in the entire temperature and flow field. The observed phenomena are described with regard to the thermocapillary convection.