• Coupled systems mechanics
• /
• v.3 no.1
• /
• pp.53-71
• /
• 2014

Accurate prognoses of the durability of concrete structures require a detailed description of the continuously running aging processes and a consideration of the complete load history. Therefore, in the framework of continuous porous media mechanics a model is developed, which allows a detailed analysis of the most important aging processes of concrete as well as a flexible coupling of different processes. An overview of the prediction model and the balance equations is given. The material dependent model equations, the consequences of coupling different processes and the solution scheme are discussed. In two case studies the aging of concrete due to hydration and chloride penetration are presented, which illustrate the capabilities and the characteristics of the developed model.

• Journal of the Korean Society of Systems Engineering
• /
• v.18 no.1
• /
• pp.58-65
• /
• 2022

An application case of systems engineering (SE) processes for the small unmanned aerial vehicle (UAV) development project, which was funded by the Korean government during June 2017 ~ August 2020, is briefly presented in this paper. From the beginning to the end of the project, SE processes had been applied and managed by simple and intuitive aspects for the small/medium business companies joined with insufficient experiences of SE. And the specific considerations of the processes were focused to the missions of disaster and public safety purposes required from the government, such as identification, patrol, fire, rescue, etc. As a result, the project applied by the tailored SE processes had been rated of a good and higher accomplishment on the final evaluation, and then the related several programs were prepared successively for the other opportunities.

• Journal of Korean Society of Water and Wastewater
• /
• v.21 no.4
• /
• pp.395-407
• /
• 2007

Disinfection by-products(DBPs) are formed through the reaction between chlorine and natural organic matter(NOM) in water treatment. For reducing the formation of chlorinated DBPs in the drinking water treatment, there is a need to evaluate the behavior of NOM fractions and the occurrence of DBPs for each fraction. Among the six fractions of NOM, the removal of HPOA and HPIN got accomplished through coagulation and sedimentation processes. Advanced water treatment processes were found to be most significant to remove the HPOA and HPON. It was found that HPOA made the most THMFP level than any other fractions and HPIA and HPOA formed higher HAAFP. The fraction of NOM with MW less than 1k Da was 32.5~54.3% in intake raw water. Mostly the organic matter with MW more than 1k Da was removed through coagulation and sedimentation in the drinking water treatment processes. In case of advanced water treatment processes, the organic matter with MW 1k~100k Da decreased by means of ozone oxidation for high molecular weight substances. As the result low molecular organic matter increased. In the BAC and GAC processes, the organic matter with MW less than 100k Da decreased.

• Journal of Korean Academy of Nursing
• /
• v.33 no.8
• /
• pp.1171-1177
• /
• 2003

Purpose. Despite many smoking cessation programs, many patients with CAD continue to smoke or re-smoke. The processes of change and self-change for smoking cessation is emphasized. The purpose of present study was to investigate decisional balances and processes of change according to stages of change for smoking cessation in the patients with CAD. Methods. This descriptive study was performed using the self-reported questionnaires from 157 male patients with CAD who have smoking experiences. The questionnaires consisted of decisional balances toward smoking (pros/cons) and processes of change including 7 factors. Results. 45.2% of the subjects had myocardial infarction and 54.8% for angina pectoris. Major stages of change were maintenance, contemplation, and precontemplation in 62%, 14%, and 18% respectively. The mean score of pros smoking was 31.07 and cons smoking was 32.52. The mean scores of processes of change were high in all 7 factors, especially in self determination. The pros smoking in precontemplation stage was significantly higher than those in other stages. Between contemplation and precontemplation stages, processes of change showed significant differences in stimulus control, self determination, information management, and dramatic relief. Conclusion. This study suggests that decisional balances and processes of change are stage-specific. As this study, smoking cessation program in the patients with CAD must put priority on the patients group in pre-contemplation and contemplation stages, and stress self determination and dramatic relief.

• Journal of Korean Society of Water and Wastewater
• /
• v.14 no.3
• /
• pp.224-230
• /
• 2000

Membrane processes are capable of removing much materials from water. The removal or rejection characteristics of a membrane is usually depend upon the nominal pore size or MWCO(molecular weight cut off). A membrane with a smaller nominal pore size or MWCO should be capable of removing smaller contaminants from water. A series of experiments was performed to investigate the separation characteristics of membrane processes which consisted of microfiltration(MF) and nanofiltration(NF). To evaluate removal efficiencies of some pollutants such as the consumption of $KMnO_4$, THMFP, NH3-N, Fe, Mn, and pesticides, source water sampled from the Kum river was treated by the those membrane processes. Also, the results of experiments were compared with those of conventional water treatment processes. By two types of the membrane process, total removal efficiency of $KMnO_4$ consumed, THMEP, and $NH_3-N$ were 91.0%, 84.3%, and 85.5%, respectively and those processes were efficient in pesticides removal as well. Most of the effluents satisfied the Korean standard of drinking water quality continuously in the experimental periods. However, NF was needed for producing the safe drinking water in case of treating the raw water contaminated with Mn since removal efficiency of MF was not high enough. On the basis of the experimental results, it was suggested that NF could be applied to remove not only $NH_3-N$ but THMFP even without pre-chlorination.

• Korean Management Science Review
• /
• v.15 no.2
• /
• pp.109-124
• /
• 1998

Recently, as the importance placed on the design phase of system development has increased, the use of diagrams to design the overall system before implementing the actual program code has seen a proportionate increase. This study focuses on the diverse diagrams depicting organizational processes when integrating multiple processes of individual organizations to form an Inter-Organizational System(IOS). In this study, we attempt to identify the critical representation features of process diagrams that enable the effective integration of Inter-Organizational processes. In particular, the effect of the mapping relationship between the representation features of different diagrams to be integrated was tested empirically in a laboratory setting. The experimental task consisted of integrating the processes of two organization based upon the given process diagrams. Actual business processes were selected from real world cases and process diagrams were formulated based upon existing object-oriented notation. An analysis of the errors committed by the subjects during the integration process indicated that the mapping relationship between the diagram features representing the respective organizational processes had a significant impact upon the final integration outcome. Based upon these results, the present study provides a guideline for process diagrams that are crucial to effective Inter-Organizational process implementation and maintenance.

• Journal of Environmental Science International
• /
• v.25 no.8
• /
• pp.1155-1163
• /
• 2016

The treatment efficiencies of domestic sewage treatment processes were analysed and assessed to suggest and design a suitable technology for coal seam gas (CSG) water treatment. Two sewage treatment plants (S and G in Busan) were selected. The former operates with standard activated sludge and modified Ludzak Ettinger processes while the later uses the combination of $A_2/O$ and gravity fiber filtration. For both plants, the concentrations of BOD, $COD_{Mn}$, T-N and T-P were about 5.0, 19.0, 5.0, 11.0 and 1.0 ppm, respectively, which satisfy the discharge standards. Therefore, although sewage treatment processes seems to be applicable for CSG water treatment, additional processes to remove total dissolved solids and ionic compounds (i.e. bicarbonate) need to be introduced to produce fit-for-purpose water resources for beneficial use (in accordance with Water ACT 2013). This, for the CSG treatment process design, it is necessary to align the operating conditions with merging methods of combinable unit technology obtained from sewage treatment processes.

• Journal of IKEEE
• /
• v.20 no.4
• /
• pp.428-431
• /
• 2016

Power semiconductor devices had been producted with bipolar only processes, but Bipolar-CMOS-DMOS(BCD) processes have been adapted recently to fabricate these devices since most foundry companies have provided BCD processes instead of Bipolar only processes. In this study, Regulator and OP Amp are used as most popular design IPs and BCD processes for the designing are converted from bipolar only processes. Power Switching Sensor(PSS) ICs are designed specifically and fabricated on a silicon chip. The operation results of the packaged chip show the good matching with test results of the simulation.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.1
• /
• pp.28-35
• /
• 2012

We propose the live fire test process model based on systems engineering which consists of 4 phases i.e., review, setup, conduct and result. We also suggest the 4 phases acquisition model consisting of planning, execution, evaluation and disposal for test infrastructure. CMMI, TMMi and PMBOK are referred and hierarchial analysis method are adopted in developing the models. Thus, the detailed sub-processes are designed after defining higher level processes first. The higher level processes are defined by extracting common areas of all the test types. The low level processes for each specific test are designed by tailoring the higher level processes. By applying the proposed test process models into collaboration tool and information system, effective and systematic test processes for weapon systems are established.

• Coupled systems mechanics
• /
• v.8 no.6
• /
• pp.489-500
• /
• 2019

With drinking water standards becoming more rigorous and increasing demands for additional water quantities, while water resources are becoming more polluted, mathematical models became an important tool to improve water treatment processes performance in the water supply system. Water treatment processes models reflect the knowledge of the processes and they are useful tools for water treatment process optimization, design, operator training for decision making and fundamental research. Unfortunately, in the current practice of drinking-water production and distribution, water treatment processes modeling is not successfully applied. This article presents a review of some existing water treatment processes simulators and the experience of their application and indicating the main weak points of each process. Also, new approaches in the modeling of water treatment are presented and recommendations are given for the work in the future.