• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.4
• /
• pp.571-579
• /
• 1990

A dynamic relocation algorithm for non-deterministic process graph in distributed computer systems is proposed. A method is represented for determining the optimal policy for processing a process tree. A general database query request is modelled by a process tree which represent a set of subprocesses together with their precedence relationship. The process allocation model is based on operating cost which is a function fo selection of site for processing operation, data reduction function and file size. By using expected values of parameters for non-deterministic process tree, the process graph and optimal policy that yield minimum operating cost are determined. As process is relocated according to threshold value and new information of parameters after the execution of low level process for non-deterministic process graph, the assigned state that approximate to optiaml solution is obtained. The proposed algorihtm is heuristic By performing algorithm for sample problems, it is shown that the proposed algorithm is good in obtaining optimal solution.

• International Journal of Computer Science & Network Security
• /
• v.22 no.11
• /
• pp.71-76
• /
• 2022

The article aims to consider the role of computer technologies in contemporary jewelry art. The importance of computer programming, 3D-modeling and 3D-printing for the process of jewelry creating, its advertising and sales is emphasized. Both the positive features of the possibility of using computer technologies in jewelry and their shortcomings are considered. The process of changing the nature of jewelry design after the start of the use of digital technologies is highlighted. The issue of changing the perception and evaluation of a work of jewelry art, the creation of which uses mechanization, has been updated.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2021.07a
• /
• pp.433-434
• /
• 2021

본 논문에서는 RPA 도구 개발 과정 중 자동화 및 데이터 전처리 기능을 이용한 양질의 데이터 추출 과정을 기술한다. 개발된 RPA 도구에서는 녹화 기능으로 자동화 기능을 향상시켰으며, 비대칭 데이터 변환 기능과 이상치 처리 기능을 통해 업무 생산효율 증가 및 휴먼에러 방지를 제공한다.

• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1924-1926
• /
• 2001

A novel wet release process ($\mu$ CARP - Micro Channel Assisted Release Process) for releasing an extreme large-area plate structure without etching hole is proposed and experimented. Etching holes in conventional process reduce a effective area and degrade an optical characteristics by a diffraction. In addition, as the area of a released structure increases, the stietion becomes more serious. The proposed process resolves these problems by the introduction of a micro fluidic channel beneath the structure which will be released. In this paper, a 5 mm${\times}$5mm-single crystal silicon plate structure was released by the proposed $\mu$CARP without etch holes on the structure. The variation in etching time with respect to the of the introduced micro channel is also examined. This process is expected to be beneficial for the actuator of a nano-scale data storage and the scanning mirror.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.127-134
• /
• 2009

In spite of controversial debates on aesthetic issues of computer-generated electronic music, rapid advancement of music technologies in the past decade have resulted proliferation of using virtual software synthesizers and samplers in music composition. Computer-based music production platform has become not only a norm among some of contemporary music composers but also vital apparatus for their compositional process. There are two imperative parts of this compositional process involving sampling in computer-based music production, which are commercially available sample libraries that include pre-recorded audio samples, and music production software that processes them. The purpose of this study is to investigate the process and effectiveness of reconstructive compositional process utilizing distinctive features of sampling on computer music production software. This study addresses issues such as: the definition of audio sampling, how sampling is incorporated in compositional process, and what features of music production software are particularly effective in various musical expressions. The result of this study will hopefully accommodate and fulfill the needs of electronic and acoustic musicians' creativeness.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.2
• /
• pp.192-197
• /
• 2020

Multivariate processes, such as large scale power plants or chemical processes are operated in very hazardous environment, which can lead to significant human and material losses if a fault occurs. On-line monitoring technology, therefore, is essential to detect system faults. In this paper, the ICA-based fault detection method is conducted using three different multivariate process data. Fault detection procedure based on ICA is divided into off-line and on-line processes. The off-line process determines a threshold for fault detection by using the obtained dataset when the system is normal. And the on-line process computes statistics of query vectors measured in real-time. The fault is detected by comparing computed statistics and previously defined threshold. For comparison, the PCA-based fault detection method is also implemented in this paper. Experimental results show that the ICA-based fault detection method detects the system faults earlier and better than the PCA-based method.

• New & Renewable Energy
• /
• v.18 no.1
• /
• pp.29-34
• /
• 2022

The most prevalent cause of solar cell efficiency loss is reduced recombination at the metal electrode and silicon junction. To boost efficiency, a a SiO_X/poly-Si passivating interface is being developed. Poly-Si for passivating contact is formed by various deposition methods (sputtering, PECVD, LPCVD, HWCVD) where the ploy-Si characterization depends on the deposition method. The sputtering process forms a dense Si film at a low deposition rate of 2.6 nm/min and develops a low passivation characteristic of 690 mV. The PECVD process offers a deposition rate of 28 nm/min with satisfactory passivation characteristics. The LPCVD process is the slowest with a deposition rate of 1.4 nm/min, and can prevent blistering if deposited at high temperatures. The HWCVD process has the fastest deposition rate at 150 nm/min with excellent passivation characteristics. However, the uniformity of the deposited film decreases as the area increases. Also, the best passivation characteristics are obtained at high doping. Thus, it is necessary to optimize the doping process depending on the deposition method.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.1090-1095
• /
• 1992

This paper describes the systematic control method of process information transfer and machine cell control in FMS implementation. We have constructed an experimental FMS computer network and control system. The system hardware consists of host computer to manage process data and information transfer of machine cells, cell control computers to control machine cells(NC lathe, machining center). On the other hand, software is made up of oredr management module, NC program searching and generation module, NC part program error check module and cell control module. In this study, we could arrive at conclusion as following : The first, each task could be accomplihed by the efficient information transfer in hierachical computer network. The second, data base system of part programs and process control data is needed for the efficint information transfer and production management. Lastly, expansion of FMS control system could be achieved by the hierachical and decentralized computer control system.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.496-500
• /
• 2003

In This paper, a pole-zero optimized design method for multi-layed planar interdigital stripeline linear group delay bandpass filter with tap input port is presented. As a design example, a four-pole group delay filter with center frequency of 2.14GHz, bandwidth of 160MHz, and group delay variation of ${\pm}0.1nS$ for LTCC technology or multilayerd PCB technology is designed. In the design process, as well the whole structure is not necessary to be simulated, and within three times of optimizing process we have good result as well. This design method could be useful for controlling error correction of manufacturing process as well as design stage.

• Transactions of Materials Processing
• /
• v.10 no.5
• /
• pp.373-382
• /
• 2001

Die design by computer simulation has some advantages compared with the conventional method which has performed by designer's experiences and trials and errors. The die filling and solidification process of thixoforming process were simulated by MAGMAsoft/thixo module. Furthermore, the die design for thixoforming was performed with the various geometry shape. The effect of designed gate dimension on filling phenomenon was estimated by filling simulation. The calculated results was compared with experimental data. The free surface phenomenon obtained by experiment have good agreement with computer simulation results. The solidification effect much as prosity and shrinkage for designed semi-solid forging die had been predicted by computer simulation. The designed die for semi-solid forging had been applied to produce of the frame part which is used to airconditious system.