• Nuclear Engineering and Technology
• /
• v.39 no.5
• /
• pp.603-616
• /
• 2007

Roy Huddle, having invented the coated particle in Harwell 1957, stated in the early 1970s that we know now everything about particles and coatings and should be going over to deal with other problems. This was on the occasion of the Dragon fuel performance information meeting London 1973: How wrong a genius be! It took until 1978 that really good particles were made in Germany, then during the Japanese HTTR production in the 1990s and finally the Chinese 2000-2001 campaign for HTR-10. Here, we present a review of history and present status. Today, good fuel is measured by different standards from the seventies: where $9*10^{-4}$ initial free heavy metal fraction was typical for early AVR carbide fuel and $3*10^{-4}$ initial free heavy metal fraction was acceptable for oxide fuel in THTR, we insist on values more than an order of magnitude below this value today. Half a percent of particle failure at the end-of-irradiation, another ancient standard, is not even acceptable today, even for the most severe accidents. While legislation and licensing has not changed, one of the reasons we insist on these improvements is the preference for passive systems rather than active controls of earlier times. After renewed HTGR interest, we are reporting about the start of new or reactivated coated particle work in several parts of the world, considering the aspects of designs/ traditional and new materials, manufacturing technologies/ quality control quality assurance, irradiation and accident performance, modeling and performance predictions, and fuel cycle aspects and spent fuel treatment. In very general terms, the coated particle should be strong, reliable, retentive, and affordable. These properties have to be quantified and will be eventually optimized for a specific application system. Results obtained so far indicate that the same particle can be used for steam cycle applications with $700-750^{\circ}C$ helium coolant gas exit, for gas turbine applications at $850-900^{\circ}C$ and for process heat/hydrogen generation applications with $950^{\circ}C$ outlet temperatures. There is a clear set of standards for modem high quality fuel in terms of low levels of heavy metal contamination, manufacture-induced particle defects during fuel body and fuel element making, irradiation/accident induced particle failures and limits on fission product release from intact particles. While gas-cooled reactor design is still open-ended with blocks for the prismatic and spherical fuel elements for the pebble-bed design, there is near worldwide agreement on high quality fuel: a $500{\mu}m$ diameter $UO_2$ kernel of 10% enrichment is surrounded by a $100{\mu}m$ thick sacrificial buffer layer to be followed by a dense inner pyrocarbon layer, a high quality silicon carbide layer of $35{\mu}m$ thickness and theoretical density and another outer pyrocarbon layer. Good performance has been demonstrated both under operational and under accident conditions, i.e. to 10% FIMA and maximum $1600^{\circ}C$ afterwards. And it is the wide-ranging demonstration experience that makes this particle superior. Recommendations are made for further work: 1. Generation of data for presently manufactured materials, e.g. SiC strength and strength distribution, PyC creep and shrinkage and many more material data sets. 2. Renewed start of irradiation and accident testing of modem coated particle fuel. 3. Analysis of existing and newly created data with a view to demonstrate satisfactory performance at burnups beyond 10% FIMA and complete fission product retention even in accidents that go beyond $1600^{\circ}C$ for a short period of time. This work should proceed at both national and international level.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.3
• /
• pp.75-82
• /
• 2010

This study formed an estimation of the visual characteristics of urban bridges in Yanghwaro in the Gyeongui Railroad Area using a landscape simulation. Existing theses have formerly only suggested directions for design based on visual preference, but there is as yet no research on the practical process of landscape design. As a result, it is difficult to directly apply this to bridge design. This study found a potential bridge site and presented a direction for bridge design in order to improve the image of the surrounding urban landscape by surveying the visual effects and landscape preferences of different bridge types. An urban landscape was produced using a landscape simulation model and was made the background for the survey. Five bridge types--Girder, Arch, Truss, Cable and Suspension--were selected and presented. The shapes of the bridges were selected based on the floor plan. The results of this study are as follows. In a preference analysis, every bridge except Girder was evaluated as a positive influence. When rating the image, 'artificial' was rated significantly higher than other traits when assessing the background image. When the Girder Bridge was introduced, 'stable' and 'orderly' were both rated highly while 'stable', 'beautiful', 'orderly' and 'interesting' were high with the introduction of the Arch Bridge. 'Beautiful', 'stable', and 'orderly' were given a high value in the introduction of the Truss Bridge and every image except 'natural', 'harmony' and 'orderly' were highly rated in the introduction of the Cable Bridge. Further, every image but 'natural' was highly rated with the introduction of the Suspension Bridge. Based on the analysis of the landscape, there is a difference in preference before and after modeling a bridge type, while the bridge itself is an influence when it is the main object of the simulated scene. This study researched only the shape of the bridge as a part of the landscape but other elements such as stability, economics, and construction are also factors in the design of a bridge. Stability, economics, construction and other factors must be considered when selecting a bridge type in the future.

• Progress in Medical Physics
• /
• v.17 no.1
• /
• pp.24-31
• /
• 2006

Automated analysis software was developed to measure the magnitude of the intrafractional and interfractional errors during breast radiation treatments. Error analysis results are important for determining suitable planning target volumes (PTV) prior to Implementing breast-conserving 3-D conformal radiation treatment (CRT). The electrical portal imaging device (EPID) used for this study was a Portal Vision LC250 liquid-filled ionization detector (fast frame-averaging mode, 1.4 frames per second, 256X256 pixels). Twelve patients were imaged for a minimum of 7 treatment days. During each treatment day, an average of 8 to 9 images per field were acquired (dose rate of 400 MU/minute). We developed automated image analysis software to quantitatively analyze 2,931 images (encompassing 720 measurements). Standard deviations ($\sigma$) of intrafractional (breathing motion) and intefractional (setup uncertainty) errors were calculated. The PTV margin to include the clinical target volume (CTV) with 95% confidence level was calculated as $2\;(1.96\;{\sigma})$. To compensate for intra-fractional error (mainly due to breathing motion) the required PTV margin ranged from 2 mm to 4 mm. However, PTV margins compensating for intefractional error ranged from 7 mm to 31 mm. The total average error observed for 12 patients was 17 mm. The intefractional setup error ranged from 2 to 15 times larger than intrafractional errors associated with breathing motion. Prior to 3-D conformal radiation treatment or IMRT breast treatment, the magnitude of setup errors must be measured and properly incorporated into the PTV. To reduce large PTVs for breast IMRT or 3-D CRT, an image-guided system would be extremely valuable, if not required. EPID systems should incorporate automated analysis software as described in this report to process and take advantage of the large numbers of EPID images available for error analysis which will help Individual clinics arrive at an appropriate PTV for their practice. Such systems can also provide valuable patient monitoring information with minimal effort.

• KSBB Journal
• /
• v.21 no.3
• /
• pp.204-211
• /
• 2006

For the production of the recombinant human interferon-gamma(rhIFN-${\gamma}$) in Escherichia coli, human glucagon and ferritin heavy chain were used as fusion partners. Even though rhIFN-${\gamma}$ is expressed as an inclusion body form in E. coli because of strong hydrophobicity of itself, over 50% of fused rhIFN-${\gamma}$ was expressed as soluble form in E. coli $Origami^{TM}$(DE3) harboring pT7FH(HE)-IFN-${\gamma}$ which encodes ferritin heavy chain-fused rhIFN-${\gamma}$. In the case of using glucagon-ferritin heavy chain hybrid mutant as a fusion partner, 6X His-tag was additionally introduced to N-terminus of GFHM(HE)-IFN-${\gamma}$ for enhancing purification yields of rhIFN-${\gamma}$. Fusion protein HGFHM(HE)-IFN-${\gamma}$ with two 6X His-tag was more effectively bound to Ni-NTA agarose bead than GFHM(HE)-IFN-${\gamma}$ with a 6X His-tag. rhIFN-${\gamma}$ was completely purified from enterokinase-treated HGFHM(HE)-IFN-${\gamma}$ by Ni-NTA affinity column. For high-level production of rhIFN-${\gamma}$, glucose was used as the sole carbon source with simple exponential feeding rate($2.4{\sim}7.2g/h$) in fed-batch process. The effective lactose concentration for the expression of the rhIFN-${\gamma}$ was $10{\sim}20mM$. Under the fed-batch culture conditions, rhIFN-${\gamma}$ production yield reached 11 g DCW/L for 6 hours after lactose induction.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.38 no.2
• /
• pp.1-13
• /
• 2020

This study closely analyzed poems and paintings related to Beijing-Palgyeong, as well as ancient maps and ancient writings. Through the study, people who read this study can consider, Beijing-Palgyeong's the process of changing times, changing landscape perception, physical and symbolic landscape elements, structural analysis, national management relationships, and finally how it was localized as symbolic place. The view point of the Beijing-Palgyeong is distributed in four places, one outside and one inside the city. Outside of the capital city of Beijing-Palgyeong were concentrated in Seosan(西山) where the resting place of the emperor and the center of the landscape view of Beijing. The view point of Beijing-Palgyeong inside the capital city is located in two places in the royal palace's Imperial Garden and in two villages around the fortress. In other words, Beijing-Palgyeong was selected as a place closely related to the imperial family, emperor, and royal palace from the time of its initial creation. Since then, many scholars, including the emperor, have used it for national management through Won(元), Ming and Qing Dynasty, and it have become more and more characteristic of 'The capital city of eight scenic views'. The two places inside the capital city praised the Gods and Emperors in the same way. Outside the capital city, the two sites depict the comfortable lives of the people who are governed by the emperor and depicting the village landscape around the city. In the end, it can be seen that most of the Beijing-Palgyeong are related to imperial palaces and emperors. If you look at the physical landscape of Beijing-Palgyeong by element, it mainly contains the contents of national management and the emperor's eulogy. Qianlong Emperor established the Beijing-Palgyeong in 1751 through the construction of a monument. A four-character on the front of the monument, and inscribed with a seven-word written by the person on the back. It can be said that Qianlong Emperor's Beijing-Palgyeong were intended to show off the results of Manchurian rule through the material symbol of the monument. Beijing-Palgyeong have been transformed into a landmark, and modern people use it as an indicator of the Beijing-Palgyeong.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.45 no.2
• /
• pp.76-88
• /
• 2017

The urban park plays important roles in protecting the urban landscape and improving citizens' health, recreation, and the emotional life. Above and beyond these roles, the urban park is expected to rearrange urban spatial structures as a kind of urban system. The purpose of this paper is to identify empirically to change urban spatial structures by construction of the urban park. This study regards gentrification around the urban park as a process to change urban spatial structures. The gentrification means the regeneration and upgrading of deteriorated urban property by the middle class or commercial developers. The site of case analysis is the Seoul Forestry Park in Sungdong-gu, Seoul. The Seoul Forestry Park is regarded as a representative urban park of Seoul, and caused gentrification around park after the 2005 opening. This study operationally defines the gentrification index and the accessibility index from an urban park and offers an empirical analysis of relation among the urban park, the gentrification and urban spatial structure in a statistic district which is the minimum unit of Korean statistic data in 2000, 2005, and 2010, using Difference-in-Difference method and linear probability model. The results of this empirical study show that the Seoul Forestry Park changes urban spatial structures by gentrification. It reverses a trend of migration of gentrifiers before and after construction of the Seoul Forestry Park. It suggests urban park construction as an alternative method for urban regeneration by inducing the middle class into the inner city of Seoul.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.4
• /
• pp.1456-1471
• /
• 2018

This article discusses the nutritional requirements, reviews senior or geriatric dog nutritional evaluation, and then addresses some common nutrition-related problems in older dogs. The purpose of this study was to investigate the Physiologic change associated with aging, essential nutrients and their diseases in senior or geriatric dog subjects. According to a 2002 market research, 30% to 40% of dogs raisedin the United States are 7 years of age. In Europe the number of dogs considered to be "senior or geriatric" (>7 years of age) increased by approximately 50% between 1983 and 1995. A 2012 e-mail survey of 50,347 respondents revealed that 33.2% of dogs were 6 to 10 years of age and 14.7% were older than 11 years in the United States. The average life expectancy of dogs raised in the home is affected by health care, aging and nutrition.And, the aging process is influenced by breed size, genetics, nutrition, environment, and other factors. Although many pets remain active and youthful well into their teens, most dogs start to slow down and may show signs of aging beginning as early as 5 or 6 years of age. Improvements in the control of various diseases and in the nutrition of dogs have resulted in a gradual increase in the average lifespan of companion dogs. Nutritional goals for aging dogs include supporting health and vitality, preventing the onset or slowing the progression of age-related health disorders, and enhancing the dog's quality of life and, if possible, life expectancy. Aging brings with its physiologicchanges. Some changes are obvious, such as whitening of hair, a general decline in body and coat condition, and failing senses including sight and hearing. Other changes are less obvious, however, and these include alterations in the physiology of the digestive tract, immune system, kidneys, and other organs. Nutritional requirements can change with age. In addition, many diseases common in older dogs may be nutrient-sensitive, meaning that diet can play an important role in the management of the condition.

• Food Science and Industry
• /
• v.52 no.2
• /
• pp.188-201
• /
• 2019

In the past, food additives were classified and managed as chemical synthetic and natural additives according to the manufacturing process, but it was difficult to confirm the purpose or function of food additives.CODEX, an internationalstandard, classifies food additives according to their practical use, based on scientific evidence on the technical effects of food additives, instead of classifying them as synthetic or natural. Therefore, very recently, the food additive standards in Korea have been completely revised in accordance with these global trends. Currently, the classification system of food additives is divided into 31 uses to specify their functions and purposes instead of manufacturing methods. Newer revision of the legislative framework for defining and expanding the scope of the Act as an enlarged area is required. Competition for preempting new food products based on bio-based technology is very fierce in order to enhance the safety of domestic people and maximize the economic profit of their own countries. In this age of infinite competition, it is very urgent to revise or supplement the current regulations in order to revitalize the domestic food industry and enhance national competitiveness through the development of food additives using new biotechnology. In this report, current laws on domestic food ingredients, food additives and manufacturing methods, and a comparison of domestic and foreign advanced countries' regulations and countermeasures strategies were reviewed to improve national competitiveness of domestic advanced biotechnology-based food additives industry.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.40 no.1
• /
• pp.65-73
• /
• 2022

This paper analyzed the characteristics of ancient villages in Hongcun and the method of resetting the preservation area for the preservation of the changed historical and cultural space in Hongcun through the process of change. To this end, the current status of preservation areas and utilization areas in the village was identified through ancient documents, old paintings, policy materials, and interviews related to the village, and through this, the problem of resetting the preservation area was examined. As a result, the following conclusions were drawn. First, Hongcun is a village built under the influence of Confucianism, Buddhism, and Taoism, and the spatial organization was created according to the hierarchy of Confucianism. As a result, it was possible to inherit and preserve the heritage of ancestors even though the central government did not preserve it. Second, the concept of preservation in a limited sense has been applied as Hongcun has been recognized as a cultural heritage that has been passed down since ancient times, but the Great Leap Forward and the Cultural Revolution brought about changes in the village space. Since then, ancient buildings, water systems, and forests have been preserved through regulations on new construction and expansion of a building with the Hongchon preservation plan, but the development within the preservation area is underway due to changes in the lives of original inhabitants, which were followed by continued development pressure and reform and opening. Third, the original inhabitant of ancient villages had a high perception of the value of the heritage, but they demanded the preparation of measures to improve living conditions and create profits, and the active use of villages for this. Fourth, the forest consisting of old trees is being restored, but the gardens in the old house are showing a phenomenon that the garden space is reduced or transformed for use. The bridges and parking lots were newly built in the southern area, which was extended from the western area, the original entrance to the ancient village, resulting in changes in the existing entrance. This was found to be the primary cause of the spatial change of the ancient village, as the road system was modified to make it convenient for tourists to enter and exit. Fifth, the existing preservation area should be reset and preserved by resetting the preservation route centered on Wolso(half Moon Pool), while the surrounding area should be set as a direct and indirect experience space, and according to the hierarchy of each space, the utilization should proceed while the preservation is carried out by crossing the preservation and the utilization.

• Journal of Appropriate Technology
• /
• v.6 no.1
• /
• pp.28-36
• /
• 2020

Sustainable appropriate technology requires user-centered design with consideration of the political, cultural and environmental aspects of the area. However, in the preparation of appropriate technology, there is a limit to the prior grasp of the user's intention and experience leading to the actual behavior of the user after the dissemination. As a result, appropriate technologies are often inconvenient for practical use or used for other purposes, contrary to the designer's intention. This study analyzes the case of appropriate technology with an analysis framework that reflects Maier's affordance theory, and proposes a design solution that can overcome the limitations of existing design. Affordance theory is the theory of factors that cause the user to identify and use features through interpretation based on prior knowledge and experience about things. The analysis cases in this study are the interviews with the designers, management education materials, and manager interviews for water purification systems at three of six schools in Binh Dinh Province, Vietnam, from August 2015 to January 2018. The case was attempted to be improved by periodic installation, maintenance, and inspection, but similar problems continued to occur. First, the facility inspections and manager interviews are compared with manager training materials distributed at the time of installation to find inconsistencies. Next, we analyze the designer's intended affordance and the affordances that actually influenced the management behavior. And then, we propose design solutions based on commonly found problems and affordances. This study suggests that it is necessary to apply the design considering the user's behavior before distributing the appropriate technology, and this study will be precedent in the process of finding the improvement through the analysis framework based on the affordance.