• 한국BIM학회 논문집
• /
• 제13권4호
• /
• pp.1-12
• /
• 2023

In Korea, there are many attempts to automate architectural design tasks, focusing on government-led national R&D projects and private operators, in order to enhance global competitiveness and productivity of the building service industry. However, according to a survey of architectural design office practitioners, only 25% (9 out of 37) have used it, suggesting that there are fewer cases of practical use in the field compared to research and investment in automation technology development, and there are discrepancies between automation and technology development items required in the field. In this study, the priority of automation of planning and design work of architectural design office practitioners is derived, and a comparative analysis is conducted with domestic architectural design automation service items based on the priority. A survey was conducted on practitioners of domestic architectural design offices to derive automation priorities for 19 items of architectural planning and design work. Based on the derived priorities, the degree of reflection of the working-level automation needs of domestic services was confirmed by comparing them with the domestic architectural planning and design automation service items. As a result, it was confirmed that domestic architectural planning and design automation services did not properly reflect the priority of planning and design work automation of architectural design office practitioners. This suggests that it is necessary to reflect the priorities derived in this study in technology development in order to increase the cases of practical use of the automation technology in the working environment and improve the productivity of service.

• 한국측량학회지
• /
• 제23권3호
• /
• pp.221-231
• /
• 2005

수치지도 Ver. 2.0은 지리정보시스템에 적합하지만 수치지도로부터 외형적으로 정보를 취득하거나, 종이지도 제작을 위한 용이성 등은 오히려 퇴보되었다. 본. 연구에서는 이러한 문제점을 고려하여 지리정보시스템에서 요구하는 기하하적, 논리적 데이터구조를 가지면서 종이지도 또는 수치지도 Ver. 1.0 수준의 정보력을 갖는 수치지도 Ver. 2.0을 제작하고자 한다. 연구를 위하여 동일지역의 종이지형도, 수치지도 Ver 1.0 및 수치지도 Ver 2.0을 대상으로 지형코드, 색상, 지형코드우선순위 등을 분석하였다. 지형코드의 우선순위에 대해서는 실제지형과 같은 순위로 배열함을 원칙으로 하되 위치에 따라 순위가 뒤바뀌는 경우에 대해서는 별도의 코드를 생성하였다. 본 연구의 특성상 색상 등과 같이 주관적인 감각이 포함되는 요소에 대해서는 기존의 도식규정을 준수하며, 지형지물의 외형적 표현방식과 전산자료구조가 서로 대치될 때는 자료구조에 우선순위를 두었다.

• 대한전자공학회논문지TC
• /
• 제40권12호
• /
• pp.106-115
• /
• 2003

3G와 그 이후의 CDMA무선망 시스템에서는 다양한 멀티미디어 서비스를 위해 서로 다른 요구조건을 가지는 몇 개의 트래픽 클래스로 정의되고 분류되어 적용될 예정이다. CDMA시스템 상의 한정되고 가변적인 자원들을 효과적으로 사용하기 위해 서로 다른 트래픽 클래스의 QoS (Quality of Service) 요구조건을 고려하여 주어진 자원들을 적절하게 분배할 필요가 있으며, 이 자원 조절의 중요한 메커니즘으로 대표적인 것 중의 하나가 호 허가 제어( Call Admission Control : CAC )라고 볼 수 있다. 본 논문에서는 트래픽 클래스별 서로 다른 요구(예: 비트 오차율)들을 고려하여, 이를 트래픽 클래스 별로 호제어에 사용하는 수신전력 임계치(threshold)에 반영하여 서비스 공평성(fairness)과 트래픽별 우선순위에 따른 서비스 차별화(differentiation)를 제공할 수 있는 QCAC(QoS-aware CAC)를 제안하고자 한다. 제안된 QCAC는 CDMA 시스템에서 트래픽 클래스별로 성능평가 척도로 호의 거절확률 측면에서 서비스 공평성과 서비스 차별화를 위해 서로 다른 적절한 수신전력 임계치(threshold)를 계산하는 방법을 적용한다. 또한 대표적 자원 할당 기법인 CS(complete sharing), CP(complete partitioning), PS(priority sharing)와 연관시켜 설명하고, 그 중에서 PS는 각각의 트래픽의 종류별로 우선순위를 고려하여 계산한 서로 다른 임계치를 CAC에 적용한 것과 연관성이 있고 이 계산된 임계치를 QCAC에서 적용하여 호제어를 함으로써 서비스 공평성과 차별화를 보여줄 수 있다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 추계 학술논문 발표대회
• /
• pp.287-289
• /
• 2012

The building construction industry of Korea was going through difficulties in improving productivity and competitiveness in international market. Therefore we expected to see the improvement in productivity by applying six-sigma based approach to general reinforced concrete construction work. As a result of applying DMAIC method, one of 6 sigma tools, we found that the most effective inspection items are 'Gap of forms' and 'status of clean'. We could see from this case study that the percentage of additional work days has decreased to 37.7% as a result of applying six-sigma based approach to reinforced concrete construction.

• 한국시뮬레이션학회논문지
• /
• 제5권1호
• /
• pp.81-90
• /
• 1996

In this paper, we propose a new events ordering mechanism for the optimistic distributed simulation of DEVS models. To simulate DEVS models in a distributed environment, a synchronization protocol is required for correct simulation. Time Warp is the most well-known optimistic synchronization protocol for distributed simulation. However, employing the Time Warp protocol in distributed simulation of DEVS models incurs events ordering problem due to the semantic difference between Time Warp and DEVS, Thus, to resolve such semantic difference, we devise the time-and-priority-stamp and $\varepsilon$ -delay schemes. The proposed schemes can order simultaneous events correctly in Time Warp-based distributed simulation of DEVS models.Time Warp and DEVS, Thus, to resolve such semantic difference, we devise the time-and-priority-stamp and $\varepsilon$ -delay schemes. The proposed schemes can order simultaneous events correctly in Time Warp-based distributed simulation of DEVS models.

• 한국환경과학회지
• /
• 제26권8호
• /
• pp.881-891
• /
• 2017

In this study, the discharge loads of non-point pollution sources were analyzed using a Hydrologic Simulation Program-Fortran (HSPF) model for 46 sub-watersheds in order to guide the management plan for water and streams passing through the city. The results using HSPF showed good applicability in comparison to point measurements, which were based on BOD, TP, and TN. The mean value of the BOD loads was $4.08kg/km^2$ per day, and the highest level of BOD was $17.75kg/km^2$ per day at Namri. Three potential areas of high priority for the installment of constructed wetlands were selected in order to reduce non-point pollution sources based on BOD loads and on environmental and economic conditions. The results for these scenarios indicated a maximum rate of reduction in BOD of 39.12% within the proposed constructed wetlands.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 추계학술대회
• /
• pp.180-185
• /
• 2003

Performance test of servo control system that is used ultra-precision positioning system with single plane X-Y stage is performed by simulation with Matlab. Analyzed for previous control algorithm and adapted for modem control theory, dual servo algorithm is developed by minimum order observer, and stability priority on controller are secured. Through the simulation and experiments on ultra precision positioning, stability and priority on ultra-precision positioning system with single plane X-Y stage and control algorithm are secured by using Matlab with Simulink and ControlDesk made in dSPACE

• 한국터널공학회:학술대회논문집
• /
• 한국터널공학회 2005년도 학술발표회 논문집
• /
• pp.262-269
• /
• 2005

The priority order about a rational repair and reinforcement is generally decided by subjective decision of engineer. An appearance investigation by tunnel scanner that is widely used in foreign nation was carried out to decide about a rational repair and reinforcement through systematic and objective analysis in box and NATM tunnel. We have decided on the order of priority of an rational repair and reinforcement through the crack density analysis by span, distance and location with the result of tunnel scanner.

• 한국건축시공학회지
• /
• 제9권2호
• /
• pp.55-61
• /
• 2009

In order to conduct construction projects effectively, the work delay factors would be managed by planned construction schedules. As construction works are delayed ceaselessly, the solution is to select and manage the key factors which delay the work ceaselessly. The subjects of this study were an apartment houses of reinforced concrete structure. Hidden work delay factor were extracted, the surveys were conducted and occurrence, severity and detection of each factor were analyzed. With this result, final orders of priority were fixed and key management factors were deducted and presented.

• 산업공학
• /
• 제23권1호
• /
• pp.1-11
• /
• 2010

There are various ways to manage the patient flow of the hospital outpatient system. However, it is difficult to apply many implementation solutions to the real outpatient system at once. Because first, the expected effects of each different solution are very much depend on the real situation of the system and applied other solutions, and second, owing to the limited resources, each solution should be implemented according to the priority. In order to overcome these difficulties, this paper focuses on proposing the comprehensive subset of implementation solutions, which is one of the most effective among various kinds of subsets, and verifying the effects of it. The comprehensive subset of solutions is derived from conducting design of experiments and simulation which determine the optimum set of different solutions and analyze the particular interactions and priority order among them. This implementation strategy can solve the difficulties of applying different kinds of various solutions to the hospital outpatient system.