• Acta Via Serica
• /
• 제3권2호
• /
• pp.181-196
• /
• 2018

In Turkey, academic studies on Korea are mostly focused on the Korean war and Korean language and literature. Conversely, in Korea, it seems that academic studies are largely focused on old Turkic history and Turkish language and literature. Unfortunately, on both sides, there is not a satisfiying number of studies on the Turkic diaspora in Korea. However, it is a reality that there was a Turco-Tatar group that lived in Korea at the time of the Japanese occupation between the two world wars. This group became Turkish subjects after World War II and became a bridge between Korea and Turkey. After the Russian revolution, around 1919, some Turco-Tatar groups like the Bashkir and the Misher emigrated to East Asia like the Manchuria region of China and Korea. Beginning from the 1920s, some families moved to Japan, but a group of Turco-Tatar stayed in Korean cities like Seoul (Keijo), Pusan and Daegu. The Turco-Tatar groups of East Asia established schools and mosques in Seoul, Korea; Harbin, Manchuria; Kobe, Nagoya; and Tokyo in Japan. A Moslem printing house (Matbaa-i ${\dot{I}}slamiye$) was also established in Tokyo in the 1930s. Many books, a newspaper and a magazine were published by this printing house. The name of the magazine was Yanga Yapon Muhbiri(New Japanese Courier), and it survived between 1931 and 1938. In this magazine, there were many interesting news and data about Korea and the Turco-Tatars of Korea. In this short article, we will try to bring out the importance of this magazine by giving samples of the articles which were written on the Turco-Tatar diaspora in Korea.

• Tissue Engineering and Regenerative Medicine
• /
• 제15권6호
• /
• pp.761-769
• /
• 2018

BACKGROUND: Bioprinting has recently appeared as a powerful tool for building complex tissue and organ structures. However, the application of bioprinting to regenerative medicine has limitations, due to the restricted choices of bio-ink for cytocompatible cell encapsulation and the integrity of the fabricated structures. METHODS: In this study, we developed hybrid bio-inks based on acrylated hyaluronic acid (HA) for immobilizing bio-active peptides and tyramine-conjugated hyaluronic acids for fast gelation. RESULTS: Conventional acrylated HA-based hydrogels have a gelation time of more than 30 min, whereas hybrid bio-ink has been rapidly gelated within 200 s. Fibroblast cells cultured in this hybrid bio-ink up to 7 days showed >90% viability. As a guidance cue for stem cell differentiation, we immobilized four different bio-active peptides: BMP-7-derived peptides (BMP-7D) and osteopontin for osteogenesis, and substance-P (SP) and Ac-SDKP (SDKP) for angiogenesis. Mesenchymal stem cells cultured in these hybrid bio-inks showed the highest angiogenic and osteogenic activity cultured in bio-ink immobilized with a SP or BMP-7D peptide. This bio-ink was loaded in a three-dimensional (3D) bioprinting device showing reproducible printing features. CONCLUSION: We have developed bio-inks that combine biochemical and mechanical cues. Biochemical cues were able to regulate differentiation of cells, and mechanical cues enabled printing structuring. This multi-functional bio-ink can be used for complex tissue engineering and regenerative medicine.

• Applied Chemistry for Engineering
• /
• 제32권4호
• /
• pp.456-460
• /
• 2021

A potentiometric sodium-ion (Na⁺) sensor was prepared using a screen-printing process with carbon and silver inks. The two-electrode configuration of the sensor resulted in potential differences in Na⁺ solutions according to Nernstian equation. The obtained Na⁺-sensor exhibited an ideal Nernstian sensitivity, fast response time, and low limit of detection. The Nernstian response was stable when the sensor was tested for repeatability and long-term durability. The Na⁺-selective membrane coated onto the carbon electrode selectively passed sodium ions against interfering ions, indicating an excellent selectivity. The portable Na⁺-sensor was finally fabricated using a printed circuit system, demonstrating the successful measurements of Na⁺ concentrations in various real samples.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• 제26권10호
• /
• pp.1447-1452
• /
• 2022

Seoul Special City, one of the world's top 10 cities and Metro City, has traditional urban manufacturing industries such as printing, sewing, and mechanical metals. Small business owners in these manufacturing clusters have developed in the form of mutual assistance. Due to the nature of the agglomeration site, each process is handled by an individual company. It is difficult for relatively small business owners to prepare order processing services that provide real-time logistics movement information between processes. This paper collects and analyzes existing logistics data for smooth order and delivery of small business owners in package manufacturing and special printing fields We design an artificial intelligence Fulfillment Service Platform system with CRNN, k-NN, and ID3 Decision Tree Algorithm. Through this study, it is expected that it will greatly contribute to increasing sales and improving capabilities by allowing small business owners in integrated areas to use individual orders and delivery customized services through the Cloud network.

• The Research Journal of the Costume Culture
• /
• 제31권4호
• /
• pp.504-518
• /
• 2023

The objective of this study was to explore the symbolism associated with phoenix patterns in China and the temporal aesthetic characteristics of these patterns found in Dunhuang Mogao Grottoes. The study involved collecting examples of clothing designs featuring phoenix patterns from China Fashion Week and the Vogue website, spanning from spring and summer of 2016 to fall and winter of 2022. After collecting and organizing these examples, representative cases were selected for analysis. The objective was to identify effective techniques for incorporating phoenix patterns within the context of Dunhuang Mogao Grottoes and provided insights for future clothing design and textile pattern design research. Phoenix patterns boasted a lengthy history and were laden with symbolic meaning. Early renditions of phoenix patterns found at Mogao Grottoes in Dunhuang were relatively simplistic in design, mainly employing elements like rhythm, coordination, balance and symmetry to convey a sense of nature and gravity. Over time, these patterns evolved under the influence of the prevailing cultural backdrop, employing repeated emphasis to portray notions of abundance and tenacity. Furthermore, regarding the use of phoenix patterns in clothing, there were four prevalent expression techniques: embroidery, beading, printing, and knitting. Traditional techniques like embroidery and beadwork often prioritized aesthetic features like coordination, emphasis, and symmetry, thereby showcasing the opulent characteristics of phoenix patterns. On the other hand, printing and knitting techniques used a single phoenix pattern or a modified version to simplify designs by emphasizing or repeating aesthetic characteristics while adhering to a modern artistic approach.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• 제21권3호
• /
• pp.156-161
• /
• 2011

Objectives: Tetrahydrofuran (THF) is a colorless, water-miscible organic liquid with low viscosity at standard temperature and pressure. THF has been used as a solvent and a precursor for various syntheses of polymers. However, THF is known to irritate to the eyes, skin and mucus membranes. Overexposure by inhalation, ingestion or skin contact may produce nausea, dizziness, headaches, respiratory irritation and possible skin burns. The purpose of this study is to evaluate of the worker exposure and characteristics of workers in the workplaces that use or manufacture THF. Methods: Sixteen factories in Korea, which manufacture or use THF, were selected for this study and a total of 130 air samples including 104 time-weighted average (TWA) samples and 26 short-term exposure limit (STEL) samples, were collected. Air samples were collected with charcoal tube (100mg/50mg) and analyzed by gas chromatograph/flame ionization detector(GC/FID). Results: The TWA concentration of THF was 16.05ppm (GM) at PS script printing, 2.32ppm (GM) at PVC stabilizer, 1.03ppm (GM) at Lithium triethylborohydride, 0.63ppm (GM) at Polytetramethylene ether glycol(PTMEG), 0.42ppm (GM) at Manufacturing THF, 0.13ppm (GM) at Glue and 0.12ppm (GM) at synthetic rubber/resins. Two out of sampes for PS script printing exceeded 50ppm as 8-hour exposure limit of MOEL. The short term exposure to THF was 54.77ppm (GM) at PS script printing, 17.10ppm (GM) at PTMEG, 13.76ppm (GM) at Manufacturing THF, 2.86ppm (GM) at Lithium triethylborohydride, 0.87ppm (GM) at synthetic rubber/resins and 0.13ppm (GM) Glue. We found that the highest exposure process for both the TWA and STEL samples was PS script process. Two samples exceeded 100ppm as short term exposure limit of Ministry of Employment and Labor(MOEL). Conclusions: Characteristic of STEL concentration for THF is considerably different from TWA concentration in workplaces because workers could exposure high concentration of THF in a moment when they work irregularly schedule. So exposure controls for momentary works have to be prepared, and considered the skin absorption and inhale of THF.

• Conservation Science in Museum
• /
• 제16권
• /
• pp.122-137
• /
• 2015

White porcelain pitcher with an openwork dragon and cloud design across its surface in the collection of the National Museum of Korea (Deoksu 5531) was acquired in 1915. The restoration has been so far completed only for the mouth of the pitcher. This study discusses a new method based on 3D scanning and printing for the restoration of missing parts in the openwork dragon and cloud design. A strength test was performed on six output materials that have been already commercialized for comparison with the strength of materials used for traditional restoration such as epoxy putty (Quick Wood^®) and epoxy (Araldite AY103+HY956^®). This process confirmed that the digital technology-aided making of a restoration model requires less time and efforts than handmade work, all the while producing a more precise model. More importantly, this method being a non-contact method, it reduces risks associated with handmade work. Another advantage of this method is that digital pre-restoration images can be saved and used for future references. Notwithstanding, future research is needed on how to effectively apply digital technology for restoration of ancient objects and how to evaluate and use 3D output as well as on the method of shaping, joining and coloring the 3D output.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 한국정보통신학회 2013년도 추계학술대회
• /
• pp.169-172
• /
• 2013

In this paper, we develop an application service of user authentication system using context awareness technology. The proposed security printer system service is applying 'NFC(Near Field Communication) technology', 'authentication system using communication with server, according to context awareness to application system. Our system extracts several context-awareness elements that happen through the user's printing with server communication. The proposed system property elements contain as print time, number of printing and name of document, etc. based on working memory operation as DB. This proposed system provide with context-awareness weight algorithm and analyzes the service which decides success or failure of user's printing. The develop app service is formed and applied when approved user who gets request. Approved user according to these context awareness tech will be provided with final service after authenticating again for the certain NFC card to reader. This results cab be contributed an authentication service based on context awareness weight algorithm and improved performance of management service in secure service applications.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• 제10권11호
• /
• pp.2075-2082
• /
• 2006

This paper presents modeling and optimization techniques for hish efficiency solar cell process on single-crystalline float zone (FZ) wafers. Among a sequence of multiple steps of fabrication, the followings are the most sensitive steps for the contact formation: 1) Emitter formation by diffusion; 2) Anti-reflection-coating (ARC) with silicon nitride using plasma-enhanced chemical vapor deposition (PECVD); 3) Screen-printing for front and back metalization; and 4) Contact formation by firing. In order to increase the performance of solar cells in terms of efficiency, the contact formation process is modeled and optimized using neural networks and genetic algorithms, respectively. This paper utilizes the design of experiments (DOE) in contact formation to reduce process time and fabrication costs. The experiments were designed by using central composite design which consists of 24 factorial design augmented by 8 axial points with three center points. After contact formation process, the efficiency of the fabricated solar cell is modeled using neural networks. Established efficiency model is then used for the analysis of the process characteristics and process optimization for more efficient solar cell fabrication.

• The Journal of Korean Academy of Prosthodontics
• /
• 제61권4호
• /
• pp.379-385
• /
• 2023

With the recent development of digital dentistry, fully digitalized methods for fabricating dentures, using intraoral scans and computer-aided design/computer-aided manufacturing (CAD-CAM), are getting popular. Digital methods have the advantage of simplifying the fabrication process in the clinic and laboratory, supplementing digital data. This case report shows a fully digital fabrication method for interim removable dentures in a patient with anterior tooth loss in which implant placement is impossible or delayed. Interim removable dentures were fabricated using two methods. One method is printing tooth and base parts separately and combining, and the other method is printing the whole denture at one time and coloring on the base part. Afterward, dentures were delivered and adaptation was evaluated using the triple scan technique. The extracted site was scanned intraorally (first scan) and the interim removable denture was digitally scanned both intraorally (second scan) and, after removal extraorally (Third scan). In both method, denture adaptation was shown favorable. We report this case report as both the patient and the operator were satisfied with a simplified process using a fully digital method in the clinic.