• Journal of the korean academy of Pediatric Dentistry
• /
• v.21 no.2
• /
• pp.599-604
• /
• 1994

Very few reports are available on the occurrence of abnormality of both enamel and dentin. This case has some characteristiced of both amelogenesis imperfecta and dentinogenesis imperfecta. Clinically, the enamel of primary dentition was completely absent and when the permanent teeth came to the pediatric dept. of Dankook University Dental Hopital for treatment. Fixed-removable type resin plate was delivered to increase vertical dimension and to solve esthetic and functional defects. Hypoplastic teeth were restored either stainless steel crown or composite resin restoration or both. The periodic recall check and oral hygiene education are recommended.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.8 no.1
• /
• pp.37-46
• /
• 1981

This study was undertaken to evaluate the pulpal responses to the pulp-capping materials such as glutaraldehyde and formocresol in pulpotomy technique, especially in the primary dentition. Mandibular primary canines and molars of 5 dogs (aged about 8-9 weeks)were selected for this study. The intervals of observation for histologic study of pulpotomized primary teeth with 2% glutaraldehyde, formocresol and calcium hydroxide in the usual manner ranged from 2 hours, 1 week, 2 weeks, 3 weeks and 5 weeks after experiments respectively. Each specimens were fixed with 10% formalin and decalcified in 5% nitric acid. All slides were stained with Hematorylin-Eosin and examined histopathologically. The results were as follows; 1. In calcium hydroxide groups, formation of dentin bridge was initiated in 1 week after experiments and completed in 5 weeks after experiments. 2. Formation of dentin bridge was not seen, whereas necrosis of pulp tissue was noted, in formocresol and glutaraldehyde groups. 3. Duration of tissue reactions and tissue changes were similar, in formocresol and glutaraldehyde groups. 4. In formocresol and glutaraldehyde groups, amputation surfaces of the pulp were covered with blood clots, beneath which coagulation necrois was noted, but inflammatory cells were not prominent, in 2 hours and 1 week after experiments. But coagulation necrosis was proceeded to the apical portion, accompanied by infiltration of inflammatory cells, since 2 weeks after experiments. And suppuration or gangrene of the pulp tissue were noted in 3 weeks and 5 weeks groups. 5. Suppuration or gangrene of pulp seemed to provoke the resorption of dentin wall, and inflammatory changes and resorption of roots were noted in the periodontal membrane near the periapical region. 6. As compared with calcium hydroxide groups, resorption of the root was pronounced in form or cresol and glutaraldehyde groups. Effects of medicaments to the succedaneous tooth germ were not seen.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.24 no.3
• /
• pp.590-596
• /
• 1997

Ankylosis is defined as a fusion of alveolar bone with dentin and/or cementum and may occur at any time during or following active eruption. Ankylosed teeth maintain existing occlusal levels while adjacent teeth continue to erupt via deposition of alveolar bone. This may result in the clinical appearance of depression or submergence of ankylosed teeth below the occlusal plane. It is found more frequently in children of late mixed dentition and in mandibular primary molars. The problems arising from ankylosed teeth, due to their submerged positions, are elongation of the antagonist, tipping of the adjacent teeth, loss of arch length, food impaction and subsequent destruction of periodontal tissue, disturbance of succedaneous tooth eruption. The author observed several cases of ankylosed primary molars and properly managed. Following results were obtained. 1. Severe infraoccluded ankylosis results in loss of arch length and undesirable effect on eruption path of succedaneous tooth, therefore early diagnosis and management are important. 2. The teeth without problems may be examined periodically and restored in order to maintain the normal occlusal function.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.24 no.1
• /
• pp.19-26
• /
• 1997

Odontodysplasia is a rare developmental anomaly of tooth formation in which hard tissue are affected. Odontodyplasia affects the primary and permanent dentitions in the maxilla, mandible, or both jaws. The maxilla is involved twice as often as the mandible. The condition is more common in female than in male patients and in the anterior than in the posterior regions. The clinical manifestation of odontodysplasia are hypoplasia and hypocalcification of the enamel and dentin of affected teeth. Teeth tend to be small and discolored, with short roots and widely open pulp canal. Delayed eruption of affected teeth with abscess formation is common. Radiographically teeth assume a faint radiolucent image ("ghost teeth"). enamel and dentin appear thin and are similar in radiodensity. The pulp chambers are often larger than normal, calcifications(pulp stone and denticle) are found within them. The etiology of regional odontodysplasia is unknown. However, several causes have been discussed, including somatic mutation, local circulatory disorders, local trauma, failure of migration and differentiation of neural crest cells, local infection.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.3
• /
• pp.348-357
• /
• 2009

The purpose of this study was to evaluate the micro-tensile bond strength (${\mu}TBS$) of four luting resin to regional dentin of human primary teeth. Dentin from non-carious primary molars were prepared from different regions (s, superficial dentin; d, deep dentin; c, cervical dentin), and divided into groups based on anatomical locations and types of luting resins (Scotchbond Multi-purpose : SB ; One-Step : OS ; AdheSE Bond : ASE ; G-Bond : GB) : SB-s, SB-d, SB-c; OS-s, OS-d, OS-c; ASE-s, ASE-d, ASE-c ; GB-s, GB-d, GB-c. Luting resins were used according to the manufacturers' instructions, to bond $Light-Core^{TM}$ Core Build-Up Composite) to the exposed dentin specimens in the light-curing mode. After storage for 1 day, ${\mu}TBS$ was tested at a cross-head speed of 1 mm/min. Data were analyzed with T-test and two-way ANOVA. The bonding interface and fractography analyses were performed with SEM. The results were as follows : 1. ${\mu}TBS$ to superficial dentin was significantly higher than to deep dentin for SB(p<0.05). But there were no significant differences in regional ${\mu}TBS$ among OS, ASE, GB(p>0.05). 2. There were no significant differences in ${\mu}TBS$ to superficial dentin among each groups. But, in deep dentin, ${\mu}TBS$ of SB-d was significantly lower than those of OS-d, ASE-d, and GB-d(p<0.05). ${\mu}TBS$ of OS-d was significantly higher than those of GB-d(p<0.05), but there were no significant differences in ${\mu}TBS$ of ASEd. There were no significant differences among ${\mu}TBS$ of ASE-d, OS-d, and GB-d.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.2
• /
• pp.272-285
• /
• 2003

This study was conducted to observe the microscopic structures of cavities formed after ablation of primary teeth, permanent teeth, enamel and dentin in using a bur and cavities formed after ablation using laser and the following results were obtained after comparing the effects of ablation. Using a #330 bur and Er:YAG laser irradiated at 150 mJ, 200 mJ, 250 mJ and 300 mJ all at the frequency of 5 Hz, 1 mm enamel and dentin samples were ablated and the ablation time was measured. In order to measure the surfaces ablated, 5 each of primary teeth and permanent teeth were ablated using a #330 bur and Er:YAG laser at 150 mJ, 200 mJ, 250 mJ and 300 mJ for 1 sec and the cross section and vertical section were observed. The following results were obtained : 1. Cutting time of Er:YAG laser was longer than that of conventinal high-speed bur regardless of teeth type. 2. Cutting on enamel, Cutting time of conventional high-speed bur in deciduous teeth was longer than in permanent teeth(P<0.05). But Er:YAG laser was not showed any difference between the deciduous and permanent teeth(P>0.05). 3. Cutting on dentin, Cutting time of conventional high-speed bur in permanent teeth was longer than deciduous teeth. Er:YAG laser of 150 mJ, 5 Hz in permanent teeth was longer than in deciduous teeth(p<0.05). But laser of other power did not showed mean difference. 4. The cavity surface treated with the convetional high-speed bur revealed a relatively flat appearance, almost covered with a debris-like smear layer. Cavity wall showed striped appearance because of blade of bur. 5. The cavity surface treated by the Er:YAG laser system was irregular or rough surface with the absence charring, carbonization, or cracking of the dentin. In addition, there was an absence of a smear layer. Cavity floor was round and relatively smooth. According to these results, cutting time of Er:YAG laser was almostly same in permanent and deciduous teeth, but more effective in dentin than enamel. Cutting the sample, Er:YAG laser was needed more time than conventional bur. But SEM findings suggested that laser device produced favorable surface characteristic(i.e, no smear layer, irregular surface, cracking).

• Journal of the korean academy of Pediatric Dentistry
• /
• v.45 no.3
• /
• pp.314-323
• /
• 2018

The aim of this study was to evaluate the shear bond strength of three luting cements and to identify the effect of thermocycling. Zirconia discs were made similar to the inner surface of a preformed pediatric zirconia crown ($NuSmile^{(R)}$ ZR crown: ZRCr). The similarity between the zirconia discs and the inner surface of a ZRCr was confirmed by scanning electron microscope. Three luting cements were $Ketac^{TM}$ Cem Permanent Glass Ionomer Luting Cement (KGI), $RelyX^{TM}$ Luting Plus Cement (RLP), $RelyX^{TM}$ Unicem Self-Adhesive Universal Resin Cement (RUR). Three luting cements were bonded according to the manufacturer's instructions for 60 zirconia discs and 60 dentin of primary teeth. Total of 120 specimens were divided into two subgroups: One was not aged, and the other was tested with 5500 thermocycling. Shear bond strength was measured using a universal testing machine, and the fracture patterns were observed with SEM. On the zirconia discs and the dentin of primary teeth, shear bond strength of RUR was higher than that of KGI and RLP, and there were statistically significant differences by cement type. The shear bond strength differences for RUR were not statistically significant depending on thermocycling.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.4
• /
• pp.654-660
• /
• 2001

Dentinogenesis imperfecta is an example of an inheritable dentinal defect originating during the histodifferentiation stage of tooth development, with involvement of the primary and permanent teeth. Shields, Bixler and El-Kafrawy proposed three types of Dentinogenesis imperfecta : Type I, II, III. Witkop reported a prevalence of 1 in 8000 with the trait, and no significant difference between male and female. Affected teeth have red-brown discoloration often with distinctive wearness of occlusal surface of posterior teeth and incisal surface of anterior teeth. Once enamel seperated from underlying defective dentin, the dentin demonstrates significantly acclerated attrision. Radiographically, the teeth have thin roots, bulbous crown, cervical constriction, and obliteration of the root canals and pulp chambers. In primary dentition periapical lesions or multiple root fractures are often observed. In successive generations the phenotypes of discoloration and wearness of teeth occurred, and one of the patient's subships, 10 year-old sister, showed general discoloration of her teeth and mild wearness. In this case, a 4 year-old male reported to the Yonsei University Pedodontics clinic, with a chief complaint of discolored teeth. The teeth showed generally yellowish-brown discoloration and moderate wearness. In radiographic features, obliteration of pulp, bulbous crown, and short roots were observed. It was diagnosed as Dentinogenesis imperfecta. The posterior teeth were restored with Stainless Steel Crown, and defective incisors including left upper primary central incisor which was extracted due to a root fracture with Open-faced Stainless Steel crown.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.1
• /
• pp.49-54
• /
• 2005

Shell teeth, a rare dysplastic condition of dentin, was first described by Rushton in 1954. It is characterized by normal enamel, extremely thin dentin, correspondingly large pulp chambers, and shortened roots. This case report is of a male 3 years old. He is refered to the Chosun University dental hospital Pediatric Dentistry because of dental caries and dentin hypoplasia. Intra-oral examination showed attrition of all primary teeth. Radiographic examination showed that the pulps were extremely large with only a shell of surrounding hard tissue. The permanent premolars were missed congenitally. The diagnosis was shell teeth. Because of behavior problem, all dental treatment was undertaken with general anaesthesia. Extration, endodontic treatment and SS crown were performed. The patient has now been wearing the space maintainer and manages it well. The patient is seen intervals for supervision and follow-up care.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.40 no.3
• /
• pp.177-184
• /
• 2013

Calcium hydroxide mixture medicaments can nearly be considered to be the ideal primary tooth filling material. However, long-term application of calcium hydroxide combinations as an intra canal medicament softens dentin. The aim of this study was to evaluate the effect of calcium hydroxide on the microhardness of root dentin of primary tooth. For the study, 60 extractedprimary incisors were divided into 3 groups (no medicament, calcium hydroxide/iodorform mixture, and calcium hydroxide/distilled water mixture). After the cleansing and shaping of canals, calcium hydroxide medicaments were applied and stored for different periods of time (1, 7, 30, 90 days). The root was horizontally sectioned into 2 mm thick specimens and the microhardness was measured using Vickers microhardness tester. The results were as follows : Root dentin microhardness of primary teeth decreased with long term exposure to calcium hydroxide medicaments according to the experimental period and showed statistically significance (p < 0.05). Root dentin microhardness of primary tooth filled with calcium hydroxide mixed with distilled water showed more decrease than filled with Vitapex and showed statistically significance (p < 0.05). Root dentin microhardness of a control group without exposure to calcium hydroxide decreased according to the experimental period and showed statistically significance (p < 0.05).