• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.469-476
• /
• 2002

There are many methods to accelerate for consolidation of the soft ground but, in this study, only preloading method was used to improve the soft ground. To measure the settlement of soft ground, surface-settlement plates were installed at several points. To examine settlement behavior of soft ground, back analysis was done using the measured results. In the back analysis, consolidation parameter( $c_{v}$) were obtained and it was compared with test result for undisturbed sample.e.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.1256-1263
• /
• 2010

Suction Drain Method is soft ground improvement technique, in which a vacuum pressure can be directly applied to the Vertical Drain Board to promote consolidation and strengthening the soft ground. This method does not require a surcharge load, different to embankment or Preloading Method. In this study, ground improvement efficiency of suction drain method was estimated when duplex loading pressure with vacuum and pressure. During suction drain method process, surface settlement and pore pressure were monitored, and cone resistance test as well as water content were also measured after the completion of Suction Drain Method treatment.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.1202-1205
• /
• 2009

Embankment preloading, in conjunction with prefabricated vertical (PV) drains, was used to accelerate consolidation of marine clays in Pusan New Harbour project. UP to eightteen settlement plates were installed at the ground reclamated site under the embankment fill to monitor the preload performance. This analysis is carried out by five settlement prediction methods including the Asaoka, Hyperbolic, Hoshino, and back-analysis method based on optimization. The field settlement data can be analysed by settlement prediction methods to predict the ultimate settlement and the degree of consolidation of the reclaimed land under charge fill. The authors compared with the analyzed results of the methods.

• 한국지반공학회논문집
• /
• 제26권7호
• /
• pp.147-159
• /
• 2010

연약지반 개량을 위한 선행재하 공법에서 현장 시공 조건에 따른 연약지반의 침하 거동을 예측하는 것은 매우 중요하다. 하지만 실제 지층의 구성이나 물성치를 정확히 평가하는 것은 매우 어렵기 때문에, 대부분은 침하 계측 데이터에 기반을 둔 침하량 추세 분석 방법을 통하여 최종 침하량 및 지반 물성치를 추정한다. 현재 다양한 침하량 추세 분석 방법이 제안되었으며, 국내 시공 현장에서는 쌍곡선법이 가장 널리 사용되고 있다. 하지만 동일한 현장에 대하여 쌍곡선법을 사용하더라도 계측 침하 자료의 회귀 방법, 그리고 분석 대상 구간을 선정함에 따라 침하랑 결과는 상이하게 나타난다. 본 연구에서는 쌍곡선법을 이용하여 부산 $\bigcirc\bigcirc$ 현장의 현장 계측 데이터로부터 침하 곡선을 추정하였다. 이때 쌍곡선법의 적용 조건을 다양하게 적용하였으며, 그에 따른 결과들을 비교, 분석하여 최적의 적용 방법을 제안하였다. 회귀 방법과 계측 데이터의 분석 구간에 따른 추정 치 변화를 평가하였으며, 이후 검증 시험을 통하여 적용 방법의 타당성을 검증하였다. 해석 결과 성토에 따른 지하수위 상승이 안정화된 시점 이후 해석하는 것이 안정적이며, 해석 방법에 대해서는 현장 데이터를 직접 회귀하는 것이 더 정확하게 침하 곡선을 추정할 수 있었다.

• Tribology and Lubricants
• /
• 제22권2호
• /
• pp.93-98
• /
• 2006

The numerical analysis of the negative pressure porous gas bearings is presented. The pressure distribution is calculated using the finite difference method. The Reynolds equation and Darcy's equation are solved simultaneously. The air bearing stiffness and damping are evaluated using the perturbation method. Rectangular uniform grid is employed to model the bearing. The vacuum preloading is considered. The pressure in the vacuum pocket is assumed to be a constant negative pressure. The total load, stiffness, damping and flow rate are calculated fur several geometrical configurations and several values of negative pressure. It is found that too large vacuum pocket can result in negative total force.

• 한국지반신소재학회논문집
• /
• 제21권1호
• /
• pp.11-21
• /
• 2022

본 연구에서는 개별진공압밀공법과 침투압밀공법의 단점을 보완하여 새로운 연약지반 개량공법인 개별진공 침투압밀공법을 개발하여 수치해석을 통해 지반 공학적 거동을 예측하였다. 개별진공 침투압밀공법을 적용할 경우, 대수층이 개량 대상층 중간 또는 하단에 위치하여 피압 대수층인 경우 침하 촉진 및 발생 침하량 증대 효과가 높았다. 대수층에서의 양수량은 일정 수준 이상 되면 침하 거동에 영향을 미치지 않는 것으로 나타났다. 성토체 내측이나 외측 등 다양한 위치에서 진공 양수정을 설치하여도 침하 및 수평 변위 차이는 미미하였다. 개별진공압밀과 병행하는 경우, 진공압이 적용되는 초기 침하는 진공압의 크기에 영향을 받았지만, 최종 침하량은 진공압의 영향이 미미한 것으로 예측되었다. 또한, 두 공법을 동시에 진행하는 것이 침하속도가 가장 빠르고, 내향 변위도 큰 것으로 예측하였다. 본 연구에서 개발한 공법은 매우 빠른 시점에 목표 침하량에 도달할 수 있으므로 연직배수재 배치 간격을 늘릴 수 있어 경제성을 확보할 수 있는 것으로 확인되었다.

• 한국지반공학회논문집
• /
• 제15권5호
• /
• pp.99-110
• /
• 1999

선행하중공법이 실시되는 낙동강 삼각주에서 체계적인 지반조사를 통하여 침하량과 압밀소요 시간이 예측되었으며, 엄선된 각종 계측기를 이용하여 현장계측이 수행되었다. 비교결과, 약20m 두께의 모래층에 대하여 예측침하량은 실측치의 20%에 불과하였다. 이러한 과소평가의 원인은 PBD타입시의 진동, 시간의존적 침하 및 탄성계수의 과대평가 등에서 비롯되었다. 모래층 아래에 위치한 약 20m 두께의 점성토층이 미압밀상태에 있는 것으로 가정하였던 이유 때문에 예측침하량은 실측치에 비하여 약240%까지 과대평가되었다. 그러나 압축곡선을 재구성하고 정규압밀점토를 위한 압밀침하공식을 적용하였을 때 재계산된 침하량은 실측값에 비교적 비슷하였다. 그리고 압밀소요시간은 각종 영향인자로 인하여 실제값에 비하여 약45% 과소평가되었다.

• 한국정밀공학회지
• /
• 제14권8호
• /
• pp.29-39
• /
• 1997

The clamp, as the structure which is used for supporting the pipe in the atomic power plant, is produced with a certain degree of anticlastic curvature in the current manufacturing process. In this study, the structural analysis of the clamp and the pipe was performed using ABAQUS. And the finite element modelling for the analysis was made by an HyperMesh. The contact forces which are transferred between the clamp and the pipe for the external force are changed according to the binding force of bolts and keeps the clamp tightly and protects the slipping between the clamp and the pipe. The clamps with the anticlastic curvature and with the flat curvature are considered in order to invest the anticlastic effect. In this study, another case is suggested. The present case does not have the stiffness ring on the end of the clamp but the suggested case has the ring. For the present case, the results showed that the equivalent stress is higher in the anticlastic curvature case than in the flat curvature case and the equivalent stresses on the pipe are almost the same as the binding force increses. For the suggested case, the result showed that the equivalent stress in the anticlastic curvature case decreases until some binding force and increases as the binding forces increase and is lower in some range than in the flat curvature case. From this study, the clamp with the anticlastic curvature in the suggested method is better than the clamp with the flat curvature and the optimal binding force are given.

• 한국해양공학회지
• /
• 제29권2호
• /
• pp.175-185
• /
• 2015

Jack-up type WTIV(Wind Turbine Installation Vessel) is used to avoid the effects of waves when installing wind turbines in the Southwest Sea of South Korea. During the preloading procedure, unexpected penetration may cause some risks such as excessive penetration or punch-through failure. To ensure the safety of the WTIV during preloading, the bearing capacities should be evaluated based on the soil data at each borehole. Eight boreholes (OW-1 to -8) have been drilled in the Southwest Sea of South Korea. The bearing capacities of a spudcan designed to be used in this district are calculated using both a conventional analysis and finite element analysis with the soil properties of OW-1 to -8. A finite element analysis is carried out for OW-1, -3, and -4 to gain an in-depth understanding of the soil behavior during the penetration. OW-1, -3, and -4 are representative boreholes for a strong layer overlying a soft layer, a general soft layer, and a soft layer overlying a strong layer, respectively. The resultant bearing capacity curves versus the depth of the numerical analysis are compared with the conventional method. The results show that the conventional analysis is conservative. Case studies for different spudcan areas and shapes are also conducted to seek an appropriate spudcan type for the Southwest Sea of South Korea. Finally, a spudcan with a rectangular shape and a bearing area of $112.8m^2$ is selected.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1994년도 가을 학술발표회 논문집
• /
• pp.175-181
• /
• 1994

In order to accelerate the rate of consolidation settlement and to gain a required shear strength for a given soft clay deposit, the preloading technique combined with a vertical drainage system has been widely applied. In this study, the theory of axisymmetric concolidation, which considers the variation of compressibility and permeability during the consolidation process, has been developed. Smear and well resistance effects are also considered. Furthermore, several back-analysis schemes such as simplex method, BFGS method, and ADS have been adopted in the axisymmetric consolidation program(AXICON). The measured data in the first stage of consolidation are utilized to predict the subsequent consolidation behavior.