• Title/Summary/Keyword: PreS1

Search Result 3,714, Processing Time 0.033 seconds

A CMOS Wide-Bandwidth Serial-Data Transmitter for Video Data Transmission (영상신호 전송용 CMOS 광대역 시리얼 데이터 송신기)

  • Lee, Kyungmin;Park, Sung Min
    • Journal of the Institute of Electronics and Information Engineers
    • /
    • v.54 no.4
    • /
    • pp.25-31
    • /
    • 2017
  • This paper presents a 270/540/750/1500-Mb/s serial-data transmitter realized in a $0.13-{\mu}m$ CMOS technology for the applications of video data transmission. A low-cost RG-58 copper cable(5C-HFBT-RG6T) is exploited as a transmission medium connected to a single BNC connector, which shows cable loss 45 dB in maximum at 1.5 GHz. RLGC modeling provides an equivalent circuit for SPICE simulations of which characteristics are very similar to the measured cable loss. The loss can be compensated by pre-emphasis at transmitter and equalization at receiver if needed. Measurements of the proposed transmitter chip demonstrate the operations of 270-Mb/s, 540-Mb/s, 750-Mb/s and 1.5-Gb/s, and provide the output voltage levels of $370mV_{pp}$ at 1.5 Gb/s even with the pre-emphasis turned-off. The total power consumption is 104 mW from 1.2/3.3-V supplies and the chip occupies the area of $1.65{\times}0.9mm^2$.

The Effect of the Enzyme Treatment and the Plasma Pre- Treatment on Environment Friendly Fabrics (친환경 소재에 대한 플라즈마 가공과 효소가공이 감량률에 미치는 영향)

  • Kim, Ji-Hyun
    • Journal of the Korea Fashion and Costume Design Association
    • /
    • v.11 no.1
    • /
    • pp.43-51
    • /
    • 2009
  • The cotton, wool, cotton/wool blended(80:20) and tencel fabrics were treated with low temperature oxygen or argon plasma, enzymes(cellulase or protease), or oxygen plasma-enzyme and examined for their weight loss and conditions for treatment for the environment friendly finishing. In the plasma treatment argon gas had better effect on the weight loss than oxygen gas did and the weight loss of all the fabrics was increased as increasing discharge power and discharge time. The weight loss of cotton, wool, cotton/wool blended(80:20) fabrics decreased in a large measure after 1 hr but that of tencel didn't decrease after 1 hr. In case of cellulose fibers oxygen gas plasma induced chemical functional groups on the surface of substrate more than argon gas plasma did so the weight loss of wool was larger than that of cotton, tencel fabrics in oxygen plasma-enzyme treatment. The weight loss of cotton and tencel fabrics decreased the initial stage because oxygen plasma pre-treatment caused cross linking as well as etching effect but argon plasma pre-treatment didn't. The plasma pre-treatment cleared the way for enzyme treatment on the whole but oxygen plasma pre-treatment bear in hand the increase of weight loss more or less because of the cross linking on the surface of cellulose fibers. The appropriate conditions for plasma treatment was 10-1Torr, 40W for 30minutes and for cellulase treatment were enzyme concentration of $3g/{\ell}$, pH 5, $60^{\circ}C$ for 1hr and for protease treatment were enzyme concentration of $4g/{\ell}$ pH 8, $60^{\circ}C$ for 1hr.

  • PDF

Optimal Phase of Dynamic Computed Tomography for Reliable Size Measurement of Metastatic Neuroendocrine Tumors of the Liver: Comparison between Pre- and Post-Contrast Phases

  • Huh, Jimi;Park, Jisuk;Kim, Kyung Won;Kim, Hyoung Jung;Lee, Jong Seok;Lee, Jong Hwa;Jeong, Yoong Ki;Shinagare, Atul B.;Ramaiya, Nikhil H.
    • Korean Journal of Radiology
    • /
    • v.19 no.6
    • /
    • pp.1066-1076
    • /
    • 2018
  • Objective: The reliability of size measurements of liver metastases from neuroendocrine tumors (NETs) on contrast-enhanced computed tomography (CT) phases made by different readers may be hampered due to transient, variable rim enhancement in arterial phase (AP) or portal venous phase (PVP) images. We aimed to assess the reliability of tumor size measurements in pre- and post-contrast scans. Materials and Methods: The study coordinator selected target lesions according to Response Evaluation Criteria in Solid Tumors 1.1 guidelines in 44 consecutive patients with pathologically confirmed NET liver metastases. Two blinded readers measured the longest diameters of target lesions on pre-contrast, AP, and PVP images twice with a 4-week interval. Inter- and intra-observer agreements were evaluated using Bland-Altman plots and 95% limit of agreement (LOA) calculations. Results: Of the 79 target lesions (approximate mean size of 3 cm), 45 showed rim enhancement. Inter-observer agreement assessed based on LOA was highest in pre-contrast CT images (-6.1-5.7 mm), followed by PVP (-7.9-7.1 mm) and AP (-8.5-7.4 mm) images. Intra-observer agreement showed the same trend: -2.8-2.9 mm and -2.9-2.9 mm for readers 1 and 2, respectively, on pre-contrast CT, -2.8-2.9 mm and -3.0-3.2 mm, respectively, on PVP, and -3.2-4.2 mm and -3.4-3.2 mm, respectively, on AP images. Mean tumor diameters differed significantly among the phases in the following increasing order: pre-contrast CT, PVP, and AP images. Conclusion: There was better inter- and intra-observer agreement in size measurements of NET liver metastases on pre-contrast scans than on AP and PVP scans. Pre-contrast CT may be the optimal for measuring NET liver metastases if its accuracy is proven.

Sludge Pre-Treatment by Hydrodynamic Cavitation-I: Optimization of Pre-Treatment System (수리동력학적 캐비테이션을 이용한 하수 슬러지의 전처리-I: 전처리 시스템의 최적화)

  • Maeng, Jang-Woo;Lee, Eun-Young;Bae, Jae-Ho
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.32 no.12
    • /
    • pp.1119-1125
    • /
    • 2010
  • Most of the sludge pre-treatment methods to improve the anaerobic digestibility of sludge are not practied in the fields with low economical efficiency. The venturi cavitation system (VCS) adopting hydrodynamic cavitation is simple and requires low energy. This research was conducted to investigate the optimum design and operating conditions of the VCS. The experimental results indicated that the optimum number of venturi in series was three, and the suction mode operation of the pump yielded 1.6 times higher pre-treatment efficiency per unit energy consumption than the discharge mode. The combination of venturies with different throat sizes did not affect the pre-treatment efficiency. Also, the parallel installation of the three in series venture unit yielded 30% higher pre-treatment efficiency per unit energy consumption than the single unit. Under parallel conditions, the solubilization efficiency was 5.6 mg ${\Delta}SCOD/g$ TS/kWh, which is higher than the previously reported value.

An Analysis of the Pre-service Teachers' Conceptions on Mathematical Problems (수학문제에 대한 예비교사의 인식분석)

  • Park, Mangoo
    • Education of Primary School Mathematics
    • /
    • v.25 no.1
    • /
    • pp.125-141
    • /
    • 2022
  • The purpose of this study is to analyze how pre-service teachers perceive mathematics problems by making good mathematics problems at the elementary school level and applying them to elementary school students. In this study, 86 pre-service teachers enrolled in the second and third grades of A University of Education presented good mathematics problems they thought of. In addition, these pre-service teachers predicted the solution strategies of elementary school students for the proposed mathematics problem and described the teacher's expertise while observing the problem-solving process of elementary school students. As a result of the study, pre-service teachers preferred mathematical problems needed for using mathematical concepts or algorithms, motivation, and open-ended problems as good mathematics problems, and thought that students' in-depth observation and analysis experiences could help improve teachers' problem-solving expertise. In order to enhance teachers' expertise in solving mathematics problems, the researcher proposed for pre-service teachers to observe students' mathematics problem-solving processes, to experience in developing high-quality mathematics problems, and also to distribute high-quality mathematics problems linked to textbook problems.

Study on Cooling Characteristics of the Tunnel Type Pressure Pre-Cooling System

  • Lee W. O.;Yun H. S.;Lee K. W.;Jeong H.;Cho K. H.;Cho Y. K.;Lee J. H.
    • Agricultural and Biosystems Engineering
    • /
    • v.4 no.2
    • /
    • pp.58-65
    • /
    • 2003
  • An understanding of the cooling requirements of horticultural commodities begins with adequate knowledge of their biological responses. All fresh horticultural products are living organisms, carrying on the many biological processes that are essential to the maintenance of life. The pre-cooling is essential technique for the construction of cold chain system, which is necessary to maintain marketing quality of fresh produces during the transportation and distribution. The purpose of this study is to develop the pressure cooling tunnel using conveyer for the reduction of labor and improvement of pre-cooling efficiency. Performance of developed facility was tested for the strawberries, tomatoes and Chinese cabbages. Cooling ratio as a result of pre-cooling efficiency was 1.57, 1.56 and 1.32 for strawberries, tomatoes, and Chinese cabbages respectively. Cooling ratio decreased with increasing the distance of heat conduction from surface to center. The cooling ratio of Chinese cabbages was lower than that of fruit because of its head and leaf. In aspect of cooling uniformity, there was no significant difference of final temperature among inlet, outlet and middle layers of cold air in fresh produces. After pre-cooling treatment, quality changes were measured for the weight loss, Vit. C content, and titratable acidity. The quality of pre-cooling treatment was better than that of non-treatment and was kept on well during long-term storage.

  • PDF

Study on Family Strength and Happiness of the Pre-Elderly and the Elderly (노인과 예비노인의 가정건강성과 행복에 관한 연구)

  • Kwak, In Suk
    • Journal of the Korean Home Economics Association
    • /
    • v.51 no.1
    • /
    • pp.1-16
    • /
    • 2013
  • The purpose of this study is to examine the relative influence of various characteristics that affect the happiness and family strength of pre-elderly and the elderly. This study also shows the differences between the two age groups. The National Survey of Korean Families has been done by the Ministry of Equality and Family on 2010. Respondents selected from national survey were 1016 pre-elderly and 629 elderly. The results of this study are as follows; first, 66% of the respondents chose health as the condition is being the important elements of their happiness following money, work (job), children, spouse and family life. Second, the group of people considering work and health as important elements of their happiness is happiest, but the group considering money and health as the important elements of their happiness feels a lower level of happiness. Third, the pre-elderly chose health as the most important condition, but the elderly chose subjective economic condition, among the factors affecting family strength. Fourth, family strength affects most on in regard to the happiness of pre-elderly and the elderly. Next, the more they are financially stable, physically healthier and living in rural areas, they feel the happier they feel. Based on the results of this study, further studies are needed to determine components of family strength that both pre-elderly and the elderly consider as important elements of their happiness. Support programs for the elderly without a spouse will increase the well-being of the elderly.

Effect of dentin biomodifiers on the immediate and long-term bond strengths of a simplified etch and rinse adhesive to dentin

  • Singh, Payal;Nagpal, Rajni;Singh, Udai Pratap
    • Restorative Dentistry and Endodontics
    • /
    • v.42 no.3
    • /
    • pp.188-199
    • /
    • 2017
  • Objectives: This in vitro study evaluated the effect of dentin biomodifiers on the immediate and long-term bond strengths of a simplified etch and rinse adhesive to dentin. Materials and Methods: Flat coronal dentin surfaces were prepared in 120 extracted human molars. Teeth were randomly divided into 5 groups (n = 24) according to 5 different surface pre-treatments: No pre-treatment (control); 1M carbodiimide (EDC); 0.1% epigallocatechin-3-gallate (EGCG); 2% minocycline (MI); 10% sodium ascorbate (SA). After surface pre-treatment, adhesive (Adper Single Bond 2 [SB], 3M ESPE) was applied. Composite was applied into transparent plastic tubes (2.5 mm in diameter), which was placed over the bonded dentin surface. From each group, 10 samples were subjected to shear bond strength (SBS) evaluation at 24 hours (immediate) and remaining 10 samples were tested after 6 months (delayed). Additionally, 4 samples per group were subjected to scanning electron microscopic analysis for observation of resin-dentin interface. The data were statistically analysed with Shaperio-Wilk W test, 2-way analysis of variance (ANOVA), and post hoc Tukey's test. Results: At 24 hours, SBS of all surface pre-treatment groups were comparable with the control group, with significant differences found between EDC and SA groups only (p = 0.009). After 6 months storage, EDC, EGCG, and MI pre-treatments preserved the resindentin bond strength with no significant fall. Conclusions: Dentin pre-treatment with all the dentin biomodifiers except SA resulted in significant preservation of resin-dentin bond over 6 months storage period, without negatively affecting the immediate bond strength of the etch and rinse adhesive tested.

Application of professor·learning model customized for flipped learning for enhancing basic ability of work - Focused on freshman students in radiology department of specialized colleges (직업기초능력함양을 위한 맞춤식 플립드 러닝 교수·학습모형 적용-전문대학 방사선과 1학년 재학생을 중심으로)

  • Park, Jeongkyu
    • Journal of the Korean Society of Radiology
    • /
    • v.12 no.2
    • /
    • pp.225-231
    • /
    • 2018
  • Recently, new teaching methods for communicating with teachers and students have been emerged according to the trends of decreasing the school-age population and the development of the mass media. We have applied teaching-learning model based on the flip learning to the college students in this work. As a result of the test for the customized flipped learning teaching-learning model in pre-class, the attendance rate of the major subject was 92.3% whereas that in liberal arts courses other than majors revealed 87.6%. This result for attendance rate shows that first year students in the radiology department have been actively participated in pre-class of the major subject than that of the liberal arts curriculum. From comparing the differences between the study group that was applied flipped learning in class and the non-applied group, the research group showed higher scores in knowledge, skills, and attitudes than the comparative group. In addition, more than 90% of the learners improved their responsibility, problem solving ability, creative thinking, cooperative ability, and communication ability through this learning program. From the test for the difference in the role of radiologists in the post class, the mean score was 4.40 for the group applied the teaching-learning model while that for non-applied group was 2.10. Hence, from such results, we see that this teaching-learning model is appropriate and needs to be extended to cultivate basic skills in radiology and relevant vocational education.