• Journal of the Korean Institute of Navigation
• /
• v.18 no.1
• /
• pp.31-39
• /
• 1994

The practical shiphandlers, such as ship's captain, pilot and mooring master, in charge of the SBM app-roaches and mooring operations of loaded VLCC should have a highly advanced shiphandling skills because of taking advantage of the wind and current from ahead without assistance of big tugboats. But now except some approaching skills in the vicinity of SBM buoy or waiting anchorage we do not have an optimal controlled approaching maneuvers in the entire course of port approaches. Consequently this study presents the optimal SBM approaches to the practical shiphandlers of VLCC and puts to use with effect in the practical operations. The conclusions of this simulation study are as follows : 1) The optimal SBM approaches in combination of Woo's Approach and a large change of heading were presented for the practical shiphandlers, 2) According to simulation of the pilotship the angle of a large change of heading for reducing headway is more than 70 degrees approximately. 3) Applied this optimal approaches to the SBM operations of simulated Port of Ulsan and confirmed the control of ship and the economy of port approaches time.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.13 no.4
• /
• pp.324-335
• /
• 2013

This article presents the design, control, and implementation of a small quad-rotor system under the practical limitation of being cost effective for private use, such as in the cases of control education or hobbies involving radio-controlled systems. Several practical problems associated with implementing a small quad-rotor system had to be taken into account to satisfy this cost constraint. First, the size was reduced to attain better maneuverability. Second, the main control hardware was limited to an 8-bit processor such as an AVR to reduce cost. Third, the algorithms related to the control and sensing tasks were optimized to be within the computational capabilities of the available processor within one sampling time. A small quad-rotor system was ultimately implemented after satisfying all of the above practical limitations. Experimental studies were conducted to confirm the control performance and the operational abilities of the system.

• Journal of Korean Society for Quality Management
• /
• v.24 no.2
• /
• pp.25-43
• /
• 1996

This paper presents the optimal and practical constant-stress accelerated life test plans for the lognormal lifetime distribution tinder assumptions of intermittent inspection and Type-I censoring. In an optimal plan, the low stress level and the proportions of test units allocated at each stress are determined under given inspection scheme and number of inspections such that the asymptotic variance of the maximum likelihood estimator of a certain quantile at use condition is minimized. Although the practical plan adopts the same design criterion, it involves three rather than two overstress levels in order to compromise the practical deficiencies of the optimal plan. Computational experiments are conducted to choose an allocation plan and a inspection scheme of the practical plan and to compare with test plans over a range of parameter values.

• International conference on construction engineering and project management
• /
• 2005.10a
• /
• pp.1216-1222
• /
• 2005

A shortage of construction field workers has been a serious problem, both in the developed and in the developing countries. As a solution for conquering this problem, these countries import foreign laborers from nearby less-developed countries. While this contributes to lessening the labor deficiency, foreign workers are relatively inefficient in productivity and are often exposed to the cross-cultural risks due to cultural differences, communication difficulties, different work ethics and customs, etc. Despite these facts, construction firms do not well address these issues and are lagged in establishing an appropriate management strategy against it. This paper presents a practical management plan for foreign construction workers through Focus Group Interviews (FGI) and survey investigation. On this basis, this study examines the level of awareness and important managerial aspects of the issue of foreign laborers. Finally, it suggests a cross-cultural and ready-to-use practical human resource management plan for facilitating the foreign worker's productivity.

• Educational Technology International
• /
• v.18 no.2
• /
• pp.131-157
• /
• 2017

The purposes of the study were to investigate the participation of artists in paper circuit computing learning and to conduct an in-depth study on the formation and development of practical knowledge. To do this, we selected as research participants six artists who participated in the learning program of an art museum, and used various methods such as pre-open questionnaires, participation observation, and individual interviews to collect data. The collected data were analyzed based on community of practice theory. Results showed that the artists participated in the learning based on a desire to use new technology or find a new work production method for interacting with their audiences. In addition, the artists actively formed practical knowledge in the curriculum and tried to apply paper circuit computing to their works. To continuously develop the research, participants formed a study group or set up a practical goal through planned exhibitions. The results of this study can provide implications for practical approaches to, and utilization of, paper circuit computing.

• Journal of Fashion Business
• /
• v.17 no.6
• /
• pp.88-97
• /
• 2013

'Smart Clothes', which incorporate topnotch digital technology into fashion, are a leading fashion runner in this digital era. The purpose of the study is to first help develop a practical design for outdoor backpacks which are equipped with eco-friendly solar cells that facilitate recharging diverse smart devices during outdoor activities; and, secondly, to offer some practical data from the actual appropriation tests that will be used for manufacturing such products. This trial study finds out how to conjoin some practical IT devices with fashion items and mainly focusses on designing outdoor backpacks which are loaded with solar cells for recharging electric devices, and, later, experiments on designed backpacks with some smart phones to see how it works. According to the desired purposes of backpacks, all the features can be adjusted and modified such as the kinds of solar cell panels, materials, sizes, positions of attachment, weights, etc. Smart Clothes are highly functional and fashionable items that satisfy both practical and emotional purposes, and are being actively developed to serve consumers. This study proves that Smart Clothes or Smart Wear will have practical uses for outdoor activities and will possibly lead our smart lifestyles.

• Korean Journal of Agricultural Science
• /
• v.48 no.4
• /
• pp.729-738
• /
• 2021

The purpose of this study was to suggest an improvement plan ultimately to develop practical evaluation methods for national technical qualifications in the field of seeds and horticulture based on the National Competency Standards. Through this, national technical qualifications can be strengthened in terms of professionalism in the seeds and horticulture field. In order to conduct this study, the national technical qualification currently in use was matched to certain competency units and competency unit elements of National Competency Standards. We then visited an industrial site to understand the practical factors related to the technical, facility and equipment aspects of the seeds and horticulture industrial field, after which a practical evaluation exam was developed. Also, for a feasibility study, a pilot test assessment was conducted for students majoring in seeds and horticulture, with a survey also conducted with field experts and an advisory committee consisting of experts in seeds and horticulture. Based on the results, by suggesting an improvement plan for a practical evaluation method leading to better national technical qualifications in the field of seeds and horticulture, it was shown to be possible to improve knowledge, technical, and literacy aspects. This can lead to the training of outstanding technical professionals. Ultimately, the results here are expected to contribute to the improvement of the seeds and horticulture industry.

• Asia pacific journal of information systems
• /
• v.25 no.2
• /
• pp.306-328
• /
• 2015

A recent trend in innovation paradigm is the shift from closed innovation to open innovation principles. This trend is characterized by the use of purposive inflows and outflows of knowledge not only to accelerate internal innovation, but also to expand the markets for external use of innovation. However, the Not-Invented-Here (NIH), and Not-Sold-Here (NSH) or Only-Use-Here (OUH) syndromes are the most common challenges encountered in open innovation processes. Therefore, this study has the following main aims: 1) propose a research model that explains the factors that influence NIH and NSH/OUH attitudes based on motivation theory with perceived organizational fairness and commitment, 2) investigate their impacts on NIH and NSH/OUH attitudes, and 3) provide useful theoretical and practical insights. The proposed research model was empirically tested using survey data collected from information technology (IT) professionals in Korea. One of the major findings indicates that IT professionals' perceived organizational fairness has a negative effect on NIH attitudes in open innovation process. Theoretical and practical contributions of this study are also discussed.

• Journal of dental hygiene science
• /
• v.6 no.2
• /
• pp.93-99
• /
• 2006

This study was carried out to investigate practical application status of oral hygiene devices through making a survey of labor of the D industrial company-about carefully curing oral disease in home, the status of practical application of tooth brush, the status of practical application of fluoridated toothpaste, status of practical application of auxiliary oral hygiene devices, a motive use or unuse of auxiliary oral hygiene devices. 1. In home, carefully curing oral disease is dental caries(62.4%). 2. Status of practical application toothbrush showed the highest user ratio of mideum size(79.6%). 3. Showed the highest user ratio of horizontal plane toothbrush(73.5%). 4. Answerd don't take a prudent attitued in choice of fluoridated toothpaste(73.5%). 5. In the status of reconition of oral hygiene devices, showed the highest user ratio of eletric toothbrush(77.0%). 6. In the status of reconition of auxiliary oral hygiene devices, showed the highest user ratio of wooden wedge stimulator(89.4%)and gargle liquid(84.5%). In using of oral hygiene devices, showed the highest user ratio of electric toothbrush(13.3%), toohbrush for periodontal patients(2.7%). In using of auxiliary, wooden wedge stimulator (58.4%)and gargle liquid(41.2%). In effect using of oral hygiene devices showed the highest user ratio of denture brush(50.0%)and eletric toothbrush(43.3%), in effect using of auxiliary oral hygiene devices showed the highest user ratio of water pick(80.0%) and dental floss(75.8%). 6. A motive of the use auxiliary oral hygiene device is choice by oneself through TV, advertisement, public information(57.6%), and the reason-they don't use of auxiliary oral hygiene devicebecause of they don't know proper to them the kind of auxiliary oral hygiene device.

• Journal of Industrial Technology
• /
• v.4
• /
• pp.29-35
• /
• 1984

Buckling is a significant behavior to be considered whenever we design steel structures. In the case of H-shape beams, the lateral buckling occured by bending moment must be considered. Because of the lateral buckling of H-shape beams, the bending strength of the beams are determined by the lateral buckling stress instead of the allowable bending stress. Lateral buckling stress equation, consisting of two terms, i. e. ${\sigma}_{cr}({\nu},{\omega})={\sqrt{[{\sigma}_{cr}({\nu})]^2+[{\sigma}_{cr}({\omega})]^2}}$ has been using, but for the practical purpose of use the following equations are using two, i. e. ${\sigma}_{cr}({\nu})={\frac{0.65E}{{\ell}_h/A_f}}$, ${\sigma}_{cr}({\omega})={\frac{{\pi}^2E}{({\ell}_b/i_b)^2}}$. When we use the above equations, the results are different according to the shape of beam section, and they a re rather complex. In this study lateral buckling stress equation is derived, and the proposed formula$({\sigma}_{cr}(t))$ is compared with above mentioned two basic and practical equations. To verify the proposed formula experimentaly, 16H-shape beams which have different slender ratios arc tested by applying pure bending momet. Through the experiments the buckling behavior of H-shape beams is clarified, and the results shows that the proposed formula$({\sigma}_{cr}(t))$ is accurate enough for practical purpose.