• 제목/요약/키워드: PprM

검색결과 15건 처리시간 0.027초

Deinococcus radiodurans 유래 DR1558과 PprM에 의한 Corynebacterium glutamicum의 라이신 생산 향상 연구 (Enhancement of Lysine Production in Recombinant Corynebacterium glutamicum through Expression of Deinococcus radiodurans pprM and dr1558 Genes)

  • 김수미;임상용;박시재;주정찬;최종일
    • 한국미생물·생명공학회지
    • /
    • 제45권3호
    • /
    • pp.271-275
    • /
    • 2017
  • The expression of Deinococcus radiodurans dr1558 and pprM genes was examined for enhanced lysine production in recombinant Corynebacterium glutamicum. These genes are known to confer high tolerance to pH and osmotic shock in Escherichia coli. D. radiodurans dr1558 and pprM genes were expressed in C. glutamicum by using 6 synthetic promoters of different strengths, to evaluate the effect of expression efficiency on lysine production. Recombinant C. glutamicum expressing DR1558 under the L26 and I64 promoters showed higher lysine production than that expressing DR1558 under other promoters. Similarly, recombinant C. glutamicum expressing PprM under same promoters (L26 and I64) showed a higher increase in lysine production compared to that expressing PprM under other promoters. In the absence of $CaCO_3$ in the medium, the expression of DR1558 or PprM also increased lysine concentration in C. glutamicum depending on the promoter used. Together, these results suggest that genes involved in radiation tolerance in D. radiodurans can be used to enhance production of amino acids and their derivatives.

Monoclonal antibody-based enzyme immuno-slide assay (EISA) in the rapid diagnosis of Peste des petits ruminants of goats

  • Das, Kamol K.;Rahman, M.B.;Shil, N.K.;Rahman, Md Siddiqur;Jang, Hyung-Kwan;Song, Hee-Jong
    • 한국동물위생학회지
    • /
    • 제33권1호
    • /
    • pp.1-6
    • /
    • 2010
  • Monoclonal antibody (mAb)-based enzyme immune-slide assay (EISA) was used for the detection of Peste des petits ruminants (PPR) virus from field samples collected from a natural outbreak. The clinicopathological study was undertaken to diagnose the case primarily of PPR. Antigen was detected from discharges and faeces of infected goats and swabs of postmortem lesions prepared on glass slide or glass plate using acetone fixation. Nasal discharge collected at the early stage of disease course or lung is an appropriate ante- or postmortem sample for this technique, respectively. Convalescent polyclonal sera collected from recovered animals which were diagnosed as PPR by EISA showed high antibody titer against PPR by C-ELISA, demonstrating the satisfactory specificity of the test. Therefore, EISA is a sensitive and specific assay to confirm PPR infection both in field and laboratory conditions and especially suitable for developing country.

의료서비스의 과정적 질과 잠재적으로 예방 가능한 재입원율과의 관계 (Does Process Quality of Inpatient Care Serve as a Guide to Reduce Potentially Preventable Readmission (PPR)?)

  • 최재영
    • 한국병원경영학회지
    • /
    • 제23권1호
    • /
    • pp.87-106
    • /
    • 2018
  • Purpose: 본 연구는 미국 캘리포니아와 플로리다에 위치한 의료기관을 대상으로 급성심근경색증, 심부전, 폐렴을 주진단으로 받은 메디케어 입원환자들에게 제공된 의료서비스의 과정적 질과 잠재적으로 예방이 가능한 30일 이내 위험 보정 재입원율과의 관계를 살펴보았다. Methods: 본 연구의 종속변수는 잠재적으로 예방이 가능한 30일 이내 위험 보정 질환별 재입원율이며 3M PPR 소프트웨어를 이용하여 재입원의 예방 가능 여부를 결정하였다. 미연방 의료 비용 및 이용 프로젝트 데이터베이스, 미국병원협회의 병원조사 자료, 미연방 보건복지부소속 메디케어 및 메디케이드 서비스 센터의 병원비교 자료를 이용하였다. 자료의 위계적 구조를 고려하여 다수준 로지스틱 회귀분석을 이용하여 분석하였다. Findings: 의료서비스의 과정적 품질과 퇴원 후 30일 이내 잠재적 예방 가능 위험도 보정 재입원율과의 관계는 질환별로 차이를 보였다. 폐렴의 경우 의료서비스의 과정적 질은 30일 이내 잠재적 예방 가능 보정 재입원율과 유의한 부(-)의 관계를 보였으나, 급성심근경색증과 심부전의 경우 대체로 유의한 관계를 관찰할 수 없었다. Practical Implications: 잠재적으로 예방 가능한 급성심근경색증, 심부전 재입원율을 줄이기 위해서는 의료기관에서 가이드라인으로 따를 수 있는 더욱 다양한 근거 중심의 과정적 질 지표의 개발에 대한 정부와 보건의료계의 노력이 필요하다.

3차원 Si칩 실장을 위한 효과적인 Cu 충전 방법 (Effective Cu Filling Method to TSV for 3-dimensional Si Chip Stacking)

  • 홍성철;정도현;정재필;김원중
    • 대한금속재료학회지
    • /
    • 제50권2호
    • /
    • pp.152-158
    • /
    • 2012
  • The effect of current waveform on Cu filling into TSV (through-silicon via) and the bottom-up ratio of Cu were investigated for three dimensional (3D) Si chip stacking. The TSV was prepared on an Si wafer by DRIE (deep reactive ion etching); and its diameter and depth were 30 and $60{\mu}m$, respectively. $SiO_2$, Ti and Au layers were coated as functional layers on the via wall. The current waveform was varied like a pulse, PPR (periodic pulse reverse) and 3-step PPR. As experimental results, the bottom-up ratio by the pulsed current decreased with increasing current density, and showed a value of 0.38 on average. The bottom-up ratio by the PPR current showed a value of 1.4 at a current density of $-5.85mA/cm^2$, and a value of 0.91 on average. The bottom-up ratio by the 3-step PPR current increased from 1.73 to 5.88 with time. The Cu filling by the 3-step PPR demonstrated a typical bottom-up filling, and gave a sound filling in a short time.

3차원 Si칩 실장을 위한 경사벽 TSV의 Cu 고속 충전 (High Speed Cu Filling into Tapered TSV for 3-dimensional Si Chip Stacking)

  • 김인락;홍성철;정재필
    • 대한금속재료학회지
    • /
    • 제49권5호
    • /
    • pp.388-394
    • /
    • 2011
  • High speed copper filling into TSV (through-silicon-via) for three dimensional stacking of Si chips was investigated. For this study, a tapered via was prepared on a Si wafer by the DRIE (deep reactive ion etching) process. The via had a diameter of 37${\mu}m$ at the via opening, and 32${\mu}m$ at the via bottom, respectively and a depth of 70${\mu}m$. $SiO_2$, Ti, and Au layers were coated as functional layers on the via wall. In order to increase the filling ratio of Cu into the via, a PPR (periodic pulse reverse) wave current was applied to the Si chip during electroplating, and a PR (pulse reverse) wave current was applied for comparison. After Cu filling, the cross sections of the vias was observed by FE-SEM (field emission scanning electron microscopy). The experimental results show that the tapered via was filled to 100% at -5.85 mA/$cm^2$ for 60 min of plating by PPR wave current. The filling ratio into the tapered via by the PPR current was 2.5 times higher than that of a straight via by PR current. The tapered via by the PPR electroplating process was confirmed to be effective to fill the TSV in a short time.

3차원 실장용 TSV의 펄스전류 파형을 이용한 고속 Cu도금 충전 (High Speed Cu Filling Into TSV by Pulsed Current for 3 Dimensional Chip Stacking)

  • 김인락;박준규;추용철;정재필
    • 대한금속재료학회지
    • /
    • 제48권7호
    • /
    • pp.667-673
    • /
    • 2010
  • Copper filling into TSV (through-silicon-via) and reduction of the filling time for the three dimensional chip stacking were investigated in this study. A Si wafer with straight vias - $30\;{\mu}m$ in diameter and $60\;{\mu}m$ in depth with $200\;{\mu}m$ pitch - where the vias were drilled by DRIE (Deep Reactive Ion Etching) process, was prepared as a substrate. $SiO_2$, Ti and Au layers were coated as functional layers on the via wall. In order to reduce the time required complete the Cu filling into the TSV, the PPR (periodic pulse reverse) wave current was applied to the cathode of a Si chip during electroplating, and the PR (pulse-reverse) wave current was also applied for a comparison. The experimental results showed 100% filling rate into the TSV in one hour was achieved by the PPR electroplating process. At the interface between the Cu filling and Ti/ Au functional layers, no defect, such as a void, was found. Meanwhile, the electroplating by the PR current showed maximum 43% filling ratio into the TSV in an hour. The applied PPR wave form was confirmed to be effective to fill the TSV in a short time.

정현파 엔코더를 이용한 서보전동기의 초정밀 위치제어에 관한 연구 (Study on Ultra Precise Position Control of Servomotor using Analog Quadrature Encoder)

  • 김주찬;김장목;김철우;최철
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2005년도 춘계학술대회 논문집
    • /
    • pp.260-264
    • /
    • 2005
  • This paper describes the ultra precise position control of servo motor using sinusoidal encoder based on 'Arcsine Interpolation Method'. First, the paper theoretically analyzes and verify throughout experiments, the relationship between A/D converter input ripple and the total resolution to measure the precise position. Second, this paper presents a way to compensate the total gain and offset error by utilizing a low cost programmable differential amp, by which without any special expensive equipments they are easily on-line tuned and effectively compensated. Lastly, it was compared to servomotor position control characteristics using digital incremental 50,000ppr encoder. The test results show that, with much cheaper sinusoidal encoder, the proposed method exhibits better performance both in position control and ASD applications than the 50,000ppr optical encoder.

  • PDF

Inhibitory Modulation of 5-Hydroxytryptamine on Corticostriatal Synaptic Transmission in Rat Brain Slice

  • Choi, Se-Joon;Chung, Won-Soon;Kim, Ki-Jung;Sung, Ki-Wug
    • The Korean Journal of Physiology and Pharmacology
    • /
    • 제7권6호
    • /
    • pp.295-301
    • /
    • 2003
  • Striatum plays a crucial role in the movement control and habitual learning. It receives an information from wide area of cerebral cortex as well as an extensive serotonergic (5-hydroxytryptamine, 5-HT) input from raphe nuclei. In the present study, the effects of 5-HT to modulate synaptic transmission were studied in the rat corticostriatal brain slice using in vitro extracellular recording technique. Synaptic responses were evoked by stimulation of cortical glutamatergic inputs on the corpus callosum and recorded in the dorsal striatum. 5-HT reversibly inhibited coticostriatal glutamatergic synaptic transmission in a dose-dependent fashion (5, 10, 50, and $10{\mu}M$), maximally reducing in the corticostriatal population spike (PS) amplitude to $40.1{\pm}5.0$% at a concentration of $50{\mu}M$ 5-HT. PSs mediated by non-NMDA glutamate receptors, which were isolated by bath application of the NMDA receptor antagonist, d,l-2-amino-5-phospohonovaleric acid (AP-V), were decreased by application of $50{\mu}M$ 5-HT. However, PSs mediated by NMDA receptors, that were activated by application of zero $Mg^{2+}$ aCSF, were not significantly affected by $50{\mu}M$ 5-HT. To test whether the corticostriatal synaptic inhibitions by 5-HT might involve a change in the probability of neurotransmitter release from presynaptic nerve terminals, we measured the paired-pulse ratio (PPR) evoked by 2 identical pulses (50 ms interpulse interval), and found that PPR was increased ($33.4{\pm}5.2$%) by 5-HT, reflecting decreased neurotransmitter releasing probability. These results suggest that 5-HT may decrease neurotransmitter release probability of glutamatergic corticostriatal synapse and may be able to selectively decrease non-NMDA glutamate receptor-mediated synaptic transmission.

Performance-based seismic design of a spring-friction damper retrofit system installed in a steel frame

  • Masoum M. Gharagoz;Seungho Chun;Mohamed Noureldin;Jinkoo Kim
    • Steel and Composite Structures
    • /
    • 제51권2호
    • /
    • pp.173-183
    • /
    • 2024
  • This study investigates a new seismic retrofit system that utilizes rotational friction dampers and axial springs. The retrofit system involves a steel frame with rotational friction dampers (RFD) at beam-column joints and linear springs at the corners, providing energy dissipation and self-centering capabilities to existing structures. The axial spring acts as a self-centering mechanism that eliminates residual deformations, while the friction damper mitigates seismic damage. To evaluate the seismic performance of the proposed retrofit system, a series of cyclic loading tests were carried out on a steel beam-column subassembly equipped with the proposed devices. An analytical model was then developed to validate the experimental results. A performance point ratio (PPR) was presented to optimize the design parameters of the retrofit system, and a performance-based seismic design strategy was developed based on the PPR. The retrofit system's effectiveness and the presented performance-based design approach were evaluated through case study models, and the analysis results demonstrated that the developed retrofit system and the performance-based design procedure were effective in retrofitting structures for multi-level design objectives.

병렬처리 공간자료구조연구 (A Study on Parallel Spatial Index Structure)

  • 방갑산
    • 한국정보처리학회:학술대회논문집
    • /
    • 한국정보처리학회 2009년도 추계학술발표대회
    • /
    • pp.775-776
    • /
    • 2009
  • 공간데이터를 관리하는 공간 index structure는 대부분 순차처리를 위한 구조를 가지고 있다. 많은 응용분야에서 방대한 양의 공간 데이터는 보조기억장치(예: disk)에 저장이 되어 사용이 되고 공간 index structure의 operation은 I/O에 대한 의존도가 크므로, I/O operation의 병렬처리는 공간 index structure의 질의반응시간을 현저하게 줄일 수 있다. 본 논문에서는 PPR-tree라는 병렬형 공간 index structure를 제안한다.