• The Transactions of the Korean Institute of Power Electronics
• /
• v.25 no.6
• /
• pp.433-441
• /
• 2020

This study proposes a constant power tracking algorithm to compensate for the intermittent characteristics of Photovoltaic connected to a DC micro grid. A PV-ESS integrated module in which distributed ESS is additionally connected is utilized for the proposed algorithm. PV performs P&O MPPT control at all times. To supplement the intermittent characteristics of PV, the proposed constant power tracking algorithm maintains constant power by operating the distributed ESS of the PV-ESS integrated module in accordance with the output state of the PV. By performing PSIM simulation and an experiment, this study verifies the performance of the integrated module of PV-ESS for DC micro grids applying the constant power tracking algorithm.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.3
• /
• pp.40-47
• /
• 2009

This paper presents new drain bias scheme for the linearity enhancement of envelope tacking power amplifiers for W-CDMA base-stations. In the conventional envelope tracking power amplifiers, the drain bias voltage is lowered close to the knee voltage of transistor, resulting in the severe linearity degradation. To solve this problem, it is proposed in this paper that the amplifier is biased in the conventional class AB mode with a fixed drain bias voltage if the input envelope is low and in the envelope tracking mode otherwise. Moreover, the drain bias in the envelope tracking mode is newly determined to minimized the distortion. To verify the effectiveness of the proposed bias scheme, simulation is performed on the W-CDMA based-station envelope tracking power amplifier using class AB Si-LDMOS power amplifier. It is shown from the simulation that the proposed bias scheme allows a drastic linearity enhancement with the comparable efficiency enough to meet the requirement of W-CDMA base-station without additional linearization techniques.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.5
• /
• pp.1187-1195
• /
• 2013

Photovoltaic inverters should always track the maximum power of solar cell arrays in operation. Also, they should be irrespective of the maximum power point voltage of a wide range of solar cells in tracking the maximum power point. If the current ripple of solar cells occurs, the function of maximum power point tracking drops, and normal tracking is difficult when solar radiation or the maximum power point changes. To solve this problem, this paper proposed a new maximum power point tracking algorithm with high efficiency and an algorithm to reduce the current ripple of solar cells. According to the results from the test on 4KW grid-connected PV inverter, the efficiency of maximum power point tracking and inverter output and the total harmonic distortion of inverter output current showed 99.97%, 97.5% and 1.05% respectively. So, the inverter showed excellent performance, and made possible stable maximum power point tracking operation when the solar radiation rapidly changed from 100% to 10% and from 10% to 100% for 0.5 seconds.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.9
• /
• pp.1721-1726
• /
• 2011

Recently, interest in renewable energy is increased due to exhaustion of fossil fuel and environmental pollution all over the world, therefore the solar power generation using solar energy is many researched. The solar power generation is required solar tracking control and high concentration solar thermal collector because generation performance is depended on concentrator efficiency. This paper proposes high efficiency solar power generation with two-axis tracking control using dish-type solar thermal collector that has excellent thermal collector performance and tracking algorithm that can be accurately tracked solar position. This paper proves validity through analysis with accuracy of tracking algorithm and generating efficiency.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.25 no.5
• /
• pp.404-411
• /
• 2020

Inductive power transfer (IPT) systems for electric vehicles generally require zero phase angle (ZPA) frequency tracking control to achieve high efficiency. Current sensors are used for ZPA frequency tracking control. However, the use of current sensors causes several problems, such as switching noise, degrading control performance, and control complexity. To solve these problems, this study proposes ZPA frequency tracking control without current sensors. Such control enables ZPA frequency tracking without real-time control and achieves stable zero voltage switching operation closed to ZPA frequency within all coupling coefficient and load ranges. The validity of the proposed control algorithm is verified on LCCL-S topology with a 3.3 kW rating IPT experimental test bed. Simulation verification is also performed.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.84-86
• /
• 2005

Adaptive tracking, disturbance rejection and power system stabilizer. First, this paper deals with power system stabilization problem using asymptotic tracking of arbitrary smooth bounded reference output signals, with simultaneous rejection of disturbances generated by an unknown linear exosystem. Second, this paper presents a power system stabilizer(PSS) using nonlinear adaptive observer backstepping controller.

• Proceedings of the KIEE Conference
• /
• 2006.11a
• /
• pp.266-268
• /
• 2006

Power tracking은 발전기가 생산하는 전력의 흐름을 추적함으로써 특정 발전기가 특정 부하에 공급하는 전력의 양, 측정 송전선 점유율, 계통손실에 기여량 등을 결정할 수 있게 해준다. 본 논문에서는 loop화되어 있는 실계통을 여러 domain으로 나누고 하나의 domain 또는 중첩된 domain 간의 교류송전선의 대체 안으로 FACTS나 HVDC과 같은 active 소자의 설치위치를 선정하기 위해 power tracking을 이용하였으며 이를 효과적으로 시각화 하기위한 프로그램을 개발하였다.

• Proceedings of the KIEE Conference
• /
• 2008.04c
• /
• pp.218-220
• /
• 2008

This paper proposes a the high efficiency tracking system regarding power loss when operating a tracking system for environment variable such as a rapidly changing insolation to improve the power of PV tracking system. In case of tracking an azimuth and altitude of the sun in realtime, therefore, the actual PV power is less increasing than the power of tracking system fixed a specific position. To reduce the power loss, this paper proposes a nonel control algorithm of the tracking system. The paper is analyzed efficiency about conventional PV tracking method, comparing proposed algorithm with high Performance method. We show propriety of proposed algorithm by means of the demonstrable study.

• Journal of Power Electronics
• /
• v.14 no.1
• /
• pp.156-164
• /
• 2014

The power-voltage (P-V) characteristic of a photovoltaic (PV) array is nonlinear and time varying with the change in atmospheric conditions. As a result, the maximum power point tracking (MPPT) technique must be applied in PV systems to maximize the generated energy. The incremental conductance (INC) algorithm, one of the MPPT strategies, is widely used for its high tracking accuracy, good adaptability to rapidly changing atmospheric conditions, and easy implementation. This paper presents a modified asymmetrical variable step size INC MPPT method that is based on the asymmetrical feature of the P-V curve. Compared with conventional fixed or variable step size method, the proposed method can effectively improve tracking accuracy and speed. The theoretical foundation and design principle of the proposed approach are validated by the simulation and experimental results.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1115-1116
• /
• 2011

This paper proposes tracking solar power generation system using position solar algorithm(PSA). The solar power generation is changed power according to solar position due to using solar energy. The solar tracking methods are the program method and sensor method. This paper proposes two-axis tracking solar power generation using program tracking method. The validity of proposed system in this paper is proved through analyzing temperature of solar collect, generating power and efficiency.