• Korean Journal of Veterinary Service
• /
• v.29 no.1
• /
• pp.71-77
• /
• 2006

The type of bedding material has been reported affect the environment and animal well-being. Therefore, it has an impact on the health. So, bedding material is the most Important factor in mouse environments. If it is not properly treated, experimental results are unreliable. In this study, various types of bedding material were evaluated in terms of physical characteristics and preference. It was found that bedding material consisting of large fibrous particles and wide inter-particular gap were preferred. The characteristics of bedding material were further investigated by scanning the size and shape of particles. The results show that physical characteristics such as shape, ammonia absorption, particle size effect on experimental data.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.49 no.6
• /
• pp.280-288
• /
• 2000

Recently, there has been growing interest in utilizing cogeneration(COGN) systems with a high-energy efficiency due to the increasing energy consumption and the lacking of energy resource. But an insertion of COGN system to existing power distribution system can cause several problems such as voltage variations, harmonics, protective coordination, increasing fault current etc, because of reverse power of COGN, especially in protective coordination. A study on a proper coordination with existing one is being required. The existing power distribution system is operated with radial type by one source and protection system is composed based on unidirectional power source. But an Insertion of COGN system to power distribution system change existing unidirectional power source system to bidirectional power source. Therefore, investigation to cover whole field of power distribution system must be accomplished such as changing of protection devices rating by increasing fault current, reevaluation of protective coordination. In this paper, simulation using PSCAD/EMTDC was accomplished to analyze effect of COGIN on distribution fault current. Also, the existing protection system of 22.9[kV] power distribution system and customers protection system to protect of COGIN was analyzed and the study on protective coordination between of two protection system accomplished.

• Korean Business Review
• /
• v.20 no.2
• /
• pp.61-85
• /
• 2007

Competitiveness of a firm essentially depends on the value of the product or service the firm supply. Product or service of high value derives customer purchase activity. Service mix is the process which creates competitiveness by value creation for customers through optimal combination of physical characteristics of product and service. This research is to contribute competitiveness increase of Korean manufacture industry by study of the effect of service mix as to the business competitiveness. Usually competitiveness advantage approach relies on the industry structure competition theory and the resource-based approach. However, it is said that, while the industry structure competition theory helps finding attractive industry, it rarely helps finding which companies succeed or fail in the specific industry. The resource-based viewpoint approach is limited in that this cannot provide any theory or systematic frame for the analysis even though it has contributed a lot to the competitiveness increase. Power process approach is applied to this study in order to overcome this limit and to Increase the business competitiveness. Power process is the process to create the value, the source of power by interaction of power elements, value, needs, environment and relation, the five power determination elements. Power process is a process that creates value to satisfy the power objective for the attainment of the goals of the power subject. This study is to contribute for the manufacture industry by establishing service mix strategy from the power process viewpoint.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.54 no.1
• /
• pp.25-31
• /
• 2018

In this study, the differences of holding power according to the shape and weight distribution of concrete weight used in shellfish shell fishery were investigated through the experiments. To investigate the differences in shape, five bar-shaped concrete weights with the same length and different cross-sectional shapes were produced. The sectional shape of each weight was square, triangle, circle, small cross, and large cross (SQ, TR, CI, CR-S, CR-L). Ten rectangular parallelepiped weights with different bottom area and cross-sectional area were produced. To investigate the differences by the weight distribution, the holding power on the square model (SQ) with six 50 g weights at different positions was investigated. All the holding power was obtained by measuring the tensile force generated when the concrete weight was pulled at a constant speed on the sand. As a result, there were no differences in holding power between the ten rectangular weights. However, the experiment on weights with different cross-sectional shapes showed differences in holding power. The holding power was higher in the order of CR-L > CR-S > CI > TR > SQ. In the weight distribution test, the holding power was higher as the front side of the weight was heavier. Generally, the frictional force is the same even if the shape is different, when two objects have the same value in the weight and the roughness. On the other hand, it seems to have a large impact when the shape of the bottom is deformed in the course of pulling the object. Particularly, the larger the degree of protrusion like cruciform weights, the more the holding power increased while deeply digging the bottom. It is also likely that the holding power increases as the front weight increases.

• Environmental and Resource Economics Review
• /
• v.32 no.2
• /
• pp.127-147
• /
• 2023

This study is trying to analyze the economic effect of replacing thermal power generation, one of the government's carbon-neutral policies, with new and renewable energy. For this analysis, scenario A is set to replace 100% of thermal power generation with new and renewable energy, and scenario B is set to replace 60% of thermal power generation with new and renewable energy. In addition, costs are incurred when replacing thermal power generation with new and renewable energy, and scenario 1 is the same cost as the current cost, and scenario 2 is120% higher than the current cost. Therefore, when converting thermal power generation to new and renewable energy, the scenarios are largely organized into four cases. In the case of replacing thermal power generation with new and renewable energy, the production inducement coefficient of thermal power generation decreased from the current level regardless of the scenario. However, the value-added inducement coefficient and the greenhouse gas emission inducement coefficient are lower than the current level when thermal power is converted to renewable energy by 100%, while the value-added inducement coefficient and greenhouse gas emission inducement coefficient are higher than the current level. In addition, the greenhouse gas emission induction coefficient of most industries was found to decrease, while the production induction coefficient and the value-added induction coefficient increased. Scenario A seems appropriate because the purpose of the government's policy is to reduce greenhouse gas emissions by converting thermal power into new and renewable energy. However, as a result of this, the production inducement coefficient and value-added inducement coefficient of some industries decrease, so the government's support policy is needed to solve this problem

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2006.07a
• /
• pp.534-534
• /
• 2006

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2010.04a
• /
• pp.671-672
• /
• 2010

• Journal of Electrical Engineering and Technology
• /
• v.11 no.5
• /
• pp.1100-1107
• /
• 2016

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.5
• /
• pp.2045-2053
• /
• 2012

The primary purpose of this paper is to identify the cognition of the convergence human resource for firms. For this purpose, Data have been collected from 110 firms in Daejeon city and studied the convergence human resource which recognized by firms on the company competitive power level. The results of this empirical studies are summarized as fellows. We classified in company competitive power as leading chaser, innovators and late chaser. In the talent, leading chasers demanded the total designer, problem solver and insighter, innovators demanded the total designer, problem solver and specialist, and late chasers demanded the traditional humanity. In technology management, all group think important fields. In the demanding forecasting for the market and technologies, leading chasers and innovators demanded the CEO, R&D researcher and a middle manager as the important position. For this education, they demanded the convergence ability of other technologies, the up-to-date abilities of product and technology and the understandings of market needs. In the convergence talent or leader, leader chaser and innovator demanded the specialist who attempted to combine others industries, who know well in technology and management, and the specialist who attempted to combine others technologies. But, late chaser demanded the specialist who attempted to combine others industries.

• Journal of Advanced Navigation Technology
• /
• v.10 no.3
• /
• pp.275-281
• /
• 2006

Simple-relay aided resource allocation (SRARA) schemes are incorporated with throughput guarantee scheduling (TGS) in IEEE 802.16 type time division duplex - orthogonal frequency division multiple access (TDD-OFDMA) downlink in order to enhance service coverage, where the amount of resources for relaying at each relay is limited due to either its available power which is much smaller than base station (BS) power or the overhead required for exchanging feedback information. The performance of SRARA schemes is evaluated with schedulers such as proportional fair (PF) and TGS at 64kbps and 128kbps user throughput requirements when total MS power is set to 500mW or 1 W. For 64kbps throughput requirement level, more improvement comes from relay than scheduler design. For 128kbps case, it comse from scheduler design than relay due to the fact that simple relay can't help using strictly limited amount of resources for relaying function.