• Journal of Power Electronics
• /
• 제15권5호
• /
• pp.1256-1263
• /
• 2015

A novel vector control strategy for a permanent magnet synchronous motor (PMSM) based on the kinetic energy stored in the rotor is proposed in this paper. The novel strategy is composed of two closed loops, in which the current loop is the inner loop, and the kinetic energy serves as the outer loop. The theoretical basis and the design procedure of the two loops are given. The feasibility of the proposed control strategy is verified by experimental results. When compared with traditional vector control strategies, the proposed vector control strategy based on energy feedback has better dynamic performance. In addition, an effective estimation solution for the load variation is put forward.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.448-452
• /
• 2001

This paper describes the nonlinear sensorless control of induction motor by using feedback linearization and current error; the feedback linearization technique and the current error are applied for independent between rotor flux and electric torque and for speed estimation. The dynamic characteristics of the proposed nonlinear control algorithm involving field weakening area are verified by simulation and experiment.

• 전기학회논문지
• /
• 제58권7호
• /
• pp.1405-1410
• /
• 2009

Output voltage of a DC/DC power converter system is likely to be distorted if variable loads exist in the output terminal. This paper presents a new disturbance observer(DOB) approach to maintain a robust regulation of the output voltage of a boost type DC/DC converter. Unlike the buck-type converter case, the regulation problem of the boost converter is very complicated by the fact that, with respect to the output voltage to be regulated, the system is non-minimum phase. Owing to the non-minimum phase property the classical DOB approach has not been applied to the boost converter. Motivated by a recent result on the application of DOB to non-mimimum phase system, an output feedback control law is proposed by using a parallel feedforward compensator. Simulation results using the Simulink SimPowerSystems prove the performance of the proposed controller against load variation.

• Journal of Power Electronics
• /
• 제16권4호
• /
• pp.1346-1354
• /
• 2016

This paper proposes a design guideline for the feedback gain of the adaptive full-order observer in the speed sensorless control of induction machines. The performance of the adaptive full-order observer is dependent on its feedback gain. This paper presents a pole placement method for the observer feedback gain design to improve the estimation performance of the speed adaptive observer. In the proposed method, the observer poles can be chosen independently of the induction motor poles. Instead, they can be positioned according to the operating speed. An analysis and experimental results obtained with the proposed method reveals better performances under general operating conditions.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(5)
• /
• pp.231-234
• /
• 2002

In this paper, we propose an efficient bias circuit for hearing aid using discrete BJT. The collector feedback bias circuit, widely used for the hearing aid, has a resister for negative feedback. As the resistor affects AC and DC simultaneously, it is quite difficult to adjust amplifier gain without changing DC bias point. The previous bias circuit also has weak point to be oscillated by the positive feedback of power noise if gain of hearing aid is high. In the proposed circuit, we can reduce the two weak points of the previous circuit by adding a resistor which is ${\beta}$ times larger than collector resistor between base of BJT and power supply.

• 유공압시스템학회논문집
• /
• 제1권3호
• /
• pp.14-19
• /
• 2004

The Direct Drive Valve used in this study contains a pressure-feedback-loop in itself, then it can eliminate nonlinearity such as the square-root-term in flow rate calculation and the change of bulk modulus of hydraulic oil. In this study, assuming that the dynamic characteristic of the DDV is modelled as a first order lag system, an parameter identification method using the input data and the output data is applied to obtain DDV's mathematical model. Then, a state feedback controller was designed to implement the force control of hydraulic system, and the control performance was evaluated.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.524-528
• /
• 1998

The voltage-source inverters are normally equipped with an electrolytic capacitor in their DC link, however, the electrolytic capacitor has several disadvantages such as increasing size, limiting converter life and reliability. Therefore, several approaches for removing the DC link capacitor have been studied by the authors. This paper proposes a new voltage-source inverter without DC link components. To reduce waveform distortion of the AC source current, the current-controlled PWM-rectifier with di/dt feedback is introduced. The di/dt feedback gain and LC parameters are investigated by calculation for a 0.75kW induction motor driven by this inverter. The calculated AC source currents maintain nearly sinusoidal waveforms with a unity power factor.

• 전력전자학회논문지
• /
• 제19권6호
• /
• pp.522-529
• /
• 2014

This study proposes an isolation amplifier circuit for the sensing and feedback of inverter DC-link voltage, which is inevitable for the precise control of inverter output voltage. The isolation amplifier consists of a pulse-width modulator and a pulse transformer with dual secondary windings. The accuracy of the proposed circuit depends on the precise matching of filter parameters in dual secondary circuits. The influences of parameter inaccuracy on the amplifier performances are analyzed. A modified circuit is proposed to reduce the dependency on filter parameters. The validity of the proposed method is verified through simulation and experiment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1955-1957
• /
• 2003

This paper presents a novel defected ground structure (DGS) and its application to a microwave oscillator. The presented oscillator is designed so as to use the suggested defected ground structure as a feedback loop inducing a negative resistance as well as a frequency-selective circuit. Applying the feedback loop between the drain and the gate of a FET device produces precise phase conversion in the feedback loop. The equivalent circuit parameters of the DGS are extracted by using a three-dimensional EM calculations and simple circuit analysis method. The implemented 1.07 GHz oscillator exhibits 0 dBm output power with over 15% dc-to-RF power efficiency and -106 dBc/Hz phase noise at 100 kHz offset from carrier.

• 전기전자학회논문지
• /
• 제20권3호
• /
• pp.285-290
• /
• 2016

고속 인터페이스에서 채널 대역폭에 의해 생기는 ISI는 최대 데이터 전송속도를 제한한다. ISI를 제거하는 가장 보편적인 기술로 DFE가 있다. 빠른 데이터 송수신을 위해서는 DFE가 효과적으로 ISI를 제거하는 것도 중요하지만 피드백 지연 등을 완화시켜 회로 자체의 최대 동작 주파수도 증가시켜야 한다. 또한, 싱글 엔디드 시그널링에서는 DFE가 ISI뿐만이 아닌 고주파 잡음도 효과적으로 제거하여야 한다. 한편, 데이터 전송 속도가 올라감에 따라 늘어 나는 ISI 및 고주파 잡음을 제거하기위한 DFE 구성품의 수가 증가한다. 이는 곧 추가의 전력소모를 야기하므로 고속 동작뿐만 아니라 저전력 동작도 주목할 필요가 있다. 본 논문에서는 ISI와 고주파 잡음을 효과적으로 제거하는 고속 DFE 및 저전력으로 동작하는 DFE의 동작 방식과 이들이 갖고 있는 장단점을 소개한다.