• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.433-444
• /
• 2008

Nowadays, subway station has provided not only transportation but living spaces for everyday activities. Therefore, a variety of facilities have been installed for a safety of citizens such as fire-fighting equipment, platform screen doors and giving high level of benefits such as air-conditioning and heating equipment, escalators, lighting apparatus. In order to operate these facilities appropriately, it is needless to say that electric power supply must be reliable. Many protection relays have been installed to protect electric apparatus and power system, nevertheless it..s study has been insufficient in the concrete. From this paper, through analyzing of protection relay system of electric room operated in line 2 of Seoul metro, we can help to improve stable power supply system of subway station.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 A
• /
• pp.366-368
• /
• 2003

In this paper, a parametric evaluation method of protection ability is proposed. The adequacy of every parameter is evaluated for the setting rules. Then the results are combined to give protection level of a whole protective system. The setting rules are categorized into three groups for hierarchical calculation. The proposed scheme is applied to a location problem of a new protective device to show its effectiveness.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 A
• /
• pp.193-195
• /
• 2002

In this paper, a communication module is proposed to be applied to communication between over current relay (OCR) agents in multi agent protection system. A multi agent system can achieve a global goal beyond the ability of each individual agent by working together, in which it is the prerequisite for each agent to be able to exchange or share information or processing status with other agent. The proposed communication module is purposed to enable not only each agent to bring about its own goal, but also the whole protective system to provide much improved coordinated protection. It is applied to a self adaptive protection system for a distribution network using multi agent concept to show its effectiveness.

• Journal of Communications and Networks
• /
• 제13권4호
• /
• pp.360-366
• /
• 2011

In this paper, we investigate the problem of power allocation in a heterogeneous network that is composed of a pair of cognitive users (CUs) and an infrastructure-based primary network. Since CUs have only limited effective spectrum-sensing ability and primary users (PUs) are not active all the time in all locations and licensed bands, we set up a new multi-area model to characterize the heterogeneous network. A novel combined interference-avoidance policy corresponding to different PU-appearance situations is introduced to protect the primary network from unacceptable disturbance and to increase the spectrum secondary-reuse efficiency. We use dual decomposition to transform the original power allocation problem into a two-layer optimization problem. We propose a low-complexity joint power-optimizing method to maximize the transmission rate between CUs, taking into account both the individual power-transmission constraints and the combined interference power constraint of the PUs. Numerical results show that for various values of the system parameters, the proposed joint optimization method with combined PU protection is significantly better than the opportunistic spectrum access mode and other heuristic approaches.

• 융합보안논문지
• /
• 제19권3호
• /
• pp.43-50
• /
• 2019

초연결사회에서 전력기반시설과 정보통신기반시설은 핵심 국가기반시설 중에서도 핵심이다. 그러나 전력기반시설은 최근에 이슈가 되고 있는 북한의 고 고도 핵 전자기파(HEMP) 위협에 매우 치명적이며, 따라서 공격 이후의 빠른 복구를 통한 복원성은 국가의 생존성과 직결되어 있다. 그러므로 전력기반시설은 다른 어떤 핵심기반시설보다 우선하여 선제적인 방호대책과 조기 복구계획이 수립되어야 한다. 본 논문에서는 HEMP 위협의 특성을 살펴보고, 그에 대한 전력기반시설의 위험성 및 효과적인 주요 방호대책을 살펴보았다. 향후 우리나라의 전력기반시설에 대한 '고출력 전자기파 침해 방지' 관련 법·제도의 제·개정 방향을 정립하는데 도움을 줄 수 있을 것으로 기대한다.

• KEPCO Journal on Electric Power and Energy
• /
• 제8권1호
• /
• pp.15-19
• /
• 2022

The radial distribution systems (RDS) commonly used around the world has the following disadvantages. First, when the DL is operated on a radial system, the line utilization rate is usually kept low. Second, if a fault occurs in the radial DL, a power outage of 3 to 5 minutes is occurring depending on the operator's proficiency and fault situation until the fault section is separated and the normal section is replaced. To solve this problem, Various methods have been proposed at domestic and foreign to solve this problem, and in Korea, research is underway on the advanced system of operating multiple linked DL always. A system that is electrically linked always, and that is built to enable high-speed communication during the protection coordination is named networked distribution system (NDS). Because the load shares the DL, the line utilization rate can be improved, and even if the line faults, the normal section does not need to be cut off, so the normal section does not experience a power outage. However, since it is impossible to predict in which direction the fault current will flow when a failure occurs in the NDS, a communication-based protection coordination is used, but there is no backup protection coordination method in case of communication failure. Therefore, in this paper, we propose a protective cooperation method to apply as a backup method when communication fails in NDS. The new method is to change TCC by location of CB using voltage drop in case of fault.

• 전자공학회논문지D
• /
• 제36D2호
• /
• pp.71-80
• /
• 1999

본 논문에서는 2${\mu}m$ 고전압 CMOS 공정을 사용한 보호 회로를 포함한 전력 ,MOSFET 구동기를 설계하였다. 제어 회로의 안정한 동작을 위하여 전원 관리 회로를 설계하였으며 전원 관리 회로의 전압 레귤레이터의 보호를 위하여 전압 검출 방식의 단락 보호 회로를 제안하였다. 전압 검출 방식(Voltage-Detection Short Circuit Protection; VDSCP)은 직렬 저항에 의한 전압 강하가 없고, 출력단 단락 상태에서 전압원의 전류를 출력단에 흐르지 못하도록 하는 특성이 있다. 전력 MOSFET를 보호하기 위하여 부하 단락 보호회로, 게이트 전압 제한 회로, 과전압 보호 회로를 설계하였으며, 50V의 항목 전압을 닺는 공정을 이용하여 전력 MOSFET 구동기를 위한 2${\mu}m$ 고전압 CMOS 공정을 개발하였다. 전력 MOSFET이 소비하는 전력 이외에 구동기가 소비하는 전력은 전력 MOSFET 구동 상태에 따라 20 ~ 100mW의 범위에 있는 것으로 확인하였다. 주문형으로 제작된 전력 MOSFET 구동기의 active area의 크기는 $3.5 {\times}2..8mm^2$이다.

• Journal of Electrical Engineering and Technology
• /
• 제12권2호
• /
• pp.612-620
• /
• 2017

Relay coordination in power system is a complex problem and so far, meta-heuristic algorithms and other methods as an alternative approach may not properly deal with large scale relay coordination due to their huge time consuming computation. In some cases the relay coordination could be unachievable. As the urgency for a proper approach is essential, in this paper an innovative and simple relay coordination method is introduced that is able to be applied on optimization algorithms for relay protection coordination. The objective function equation of operating time of relays are divided into two separate functions with less constraints. As the analytical results show here, this equivalent method has a remarkable speed with high accuracy to coordinate directional relays. Two distribution systems including directional overcurrent relays are studied in DigSILENT software and the collected data are examined in MATLAB. The relay settings of this method are compared with particle swarm optimization and genetic algorithm. The analytical results show the correctness of this mathematical and practical approach. This fast coordination method has a proper velocity of convergence with low iteration that can be used in large scale systems in practice and also to provide a feasible solution for protection coordination in smart grids as online or offline protection coordination.

• 조명전기설비학회논문지
• /
• 제19권6호
• /
• pp.29-35
• /
• 2005

본 논문은 고온 초전도 케이블을 전력계통의 송전용량 증대를 위해 적용시켰을 경우, 고장발생시 초전도케이블에서 예상되는 ??????치의 영향에 대해 안전하게 제어할 수 있는 방법을 제시하였다. 접근 방법으로는 초전도케이블의 ??????치 특성을 열평형 방정식으로 모델링하고 그 결과 고장전류에 따른 케이블의 설계 최대 온도상승한계에 도달하는 시간을 산출하여 기존의 보호계전시스템의 차단시간과 비교함으로서 안전성 여부를 판정하였다. ??????치발생 고장시간을 모의하기 위해 초전도케이블용 EMTDC모형을 개발하였으며, 모의 결과 초전도 케이블 계통을 보호할 수 있는 안전성 제어방식이 설계 가능함을 보였다.

• 전기학회논문지P
• /
• 제59권2호
• /
• pp.179-184
• /
• 2010

The digital substation automation system has contributed hugely to increasing the stability of power systems by providing not only protection and control of power systems but diagnostic features alongside them. Digital substation automation systems in the scale of substations consist of integrated operation systems and intelligent electronic devices. The main intelligent electronic devices currently in use are digital protection relays and the bay controllers in Gas insulated switchgears. Proficiently accomplishing the coordination of protection within the power system as a means of ensuring reliability and contriving for the stability of power supply through connection of function, the application of bay controllers is crucial, which collectively manage the protection relay at the bay level in order to achieve both. In this research, the bay controllers to be used in high-voltage Gas insulated switchgear has been localized, and in particular, the logic function and editor required in order to minimize the complicated hardware-like cable connections in the local panel have been developed. In addition, to ensure the strength and reliability of the bay controller hardware developed herein, the type tests from KERI have been successfully completed.