• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.474-477
• /
• 2004

This paper deals with a design experience of Control Element Drive Mechanism (CEDM) that is used to withdraw or insert control rods in nuclear reactor. The design is carried out to satisfy the performance requirements for CEDM that were given to ensure reliable and secure actions of the rods. The electrical parameters for four coils that energize the mechanical actuators in CEDM are determined first, Then a computer simulation for CEDM with these coils is performed to see how it works. An adjustment of the coil parameters is made from the simulation results. Finally, it is shown that our final design is valid to guarantee the required performance since the FEM(finite Element Method) calculation shows sufficient vertical attraction forces of a lift armature and a latch magnet, and good dynamics with a full load.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.28A no.12
• /
• pp.46-52
• /
• 1991

A new signal process circuit using two ISFETs as the input devices of the MOS differential amplifier stage for an ISFET biosensor has been developed. One chip integration of the newly developed signal process circuit, ISFETs and a Pt quasi-reference electrode has been carried out according to modified LOCOS p-well CMOS process. The fabricated chip showed gains of 0.8 and 1.6, good liniarity in the input-output relationship and very small power dissipation, 4mW. The chip was applied to realize a urea sensor by forming an immobilized urease membrane, using lift-off technique. on the gate of an ISFET. The urea sensor chip showed stable responses in a wide range of urea concentrations.

• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.5
• /
• pp.1091-1097
• /
• 2001

A numerical investigation was performed to determine the effect of airfoil on the optimum flap height using NACA 00XX and 44XX airfoils. The six flaps which have 0.5% chord height difference were selected . A Navier-Stokes code, FLUENT, was used to calculate the flow field of the airfoil. The code was first tested as a benchmark by modelling flow around a NACA 4412 airfoil. Predictions of local pressure coefficients are found to be in good agreement with the result of the experimental results. For every NACA 00XX and 44XX airfoil, flap heights ranging from 0.0% to 2.5% chord were changed by 0.5% chord interval and their effects were also studied. Representative results from each case are presented graphically and discussed. It is conclued that this initial approach gives an idea for the future development of the wind turbine optimum design.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.6
• /
• pp.39-48
• /
• 2014

Variable valve actuation system is one of the widely used techniques to improve the fuel efficiency and power of automotive engines. 2-step variable valve actuation systems are also paid attention for the application to direct acting type valve train systems. Besides its advantages in size, weight, relatively simple structure, ets, however, 2-step variable valve actuation system has inherent disadvantages in dynamic instability of switching system to alter discontinuous lift modes. In this study, both experimental and analytical studies are performed to understand the dynamic behavior of a switching mechanism of a 2-step variable valve actuation system, and present a design method to improve its dynamic instability.

• Journal of the Korean Society of Fashion and Beauty
• /
• v.3 no.1 s.4
• /
• pp.78-87
• /
• 2005

The Purposes of this article are to find Christian religion and Germany expressionism which were background of Nolde's art and analyze formation and special quality, expression mode of holy picture. If synthesize contents of these analysis, we could know that faith is giving religious inspiration continuously during his lift to Protestant experience through the Bible. Though there is some difference by time but we could foretell that he accomplished modern holy picture of new sensitivity by doing individual expression with equal Bible subject traditionally in 20th century that change unlike existent holy picture with these motive power. That is, with new trend which religious inspiration as imagination which spring up in experience that is not experience of artificial Christian religion is then expressionism various that historically, he accomplished unique holy picture to related each other with the historic event.

• Journal of Korean Society for Atmospheric Environment
• /
• v.19 no.6
• /
• pp.805-810
• /
• 2003

The annual air pollution emissions from construction and agricultural equipments were estimated from 1987 through 2000. The annual numbers and operation hours of 5 major construction equipments (Excavator, Bulldozer, Loader, Fork lift, Crane) and 3 major agricultural equipments (Power Tiller, Agricultural Tractor, Combine) were investigated for emission estimation. And monthly variation factors of operation hours of construction equipment were investigated too. The NO$_{x}$ emission from construction equipment have been gradually increased since 1987 to 1997, but sharply decreased as -45％ in 1998 due to economic crisis in Korea. The NO$_{x}$ emission was estimated as 64,300 ton/year from construction equipment, and as 23,300 ton/year from agricultural equipment in 2000.000.

• Transactions on Electrical and Electronic Materials
• /
• v.14 no.1
• /
• pp.28-31
• /
• 2013

A volcano shaped gated Si-FEA (silicon field emitter array) was simply fabricated using sputtering as a gate electrode deposition and lift-off for the removal of the oxide mask, respectively. Due to the limited step coverage of well-controlled sputtering and the high aspect ratio in Si dry etch caused by high RF power, it was possible to obtain Si FEAs with a stable volcano shaped gate structure and to realize the restriction of gate leakage current in field emission characteristics. For 100 tip arrays and 625 tip arrays, gate leakage currents were restricted to less than 1% of the anode current in spite of the volcano-shaped gate structure. It was also possible to keep the emitters stable without any failure between the Si cathode and gate electrode in field emission for a long time.

• Proceedings of the KIEE Conference
• /
• 2008.11a
• /
• pp.273-275
• /
• 2008

In Korea, over 97% of local energy demand is imported from other countries. And we have to lift the energy independence level up to 5% with replacement energy(renewable energy) such as solar, wind..etc. by 2011 according to the energy agreement made in Kyoto Protocol. So, we proposed some opinions such as the better improvement of solar thermal industry the people' view, cooperation among industry/university/research institutes, remote control/maintenance and government's legislature and supporting system etc.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.563-564
• /
• 2011

유도가열의 경우 고효율, 자동화, 에너지절약, 적정온도제어 등을 하기 때문에 작업환경의 개선 및 접근성에 대한 많은 이점이 있어 널리 이용되고 있다. 최근 공진특성을 이용한 고효율화를 이룬 전력변환기에 대한 연구가 활발히 이루어지고 있다. 공진을 이용한 유도가열의 경우 인덕턴스와 커패시턴스의 공진점을 추출해야하는데 작업자의 환경이나 코일의 재질 등이 균일하지 않으므로 매번 공진점을 추종해야하는 단점이 있다. 따라서 본 연구에서는 자동으로 공진점을 추적하는 알고리즘을 제안하였고 실험을 통하여 이를 검증하였다.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.30-31
• /
• 2011

현재의 고출력 LED (Light Emitting Diode)는 긴 수명시간, 적은 유지보수 비용, 그리고 고효율의 특징으로 차세대 조명 소자로 각광받고 있다. 본 논문에서는 Two-stage LED 구동 회로에서 온도 변화에 따른 정전류 제어가 가능한 LED 구동 드라이브의 효율을 개선하기 위해 입력 전압을 기본 전압으로 하고 LED 출력전류를 통한 전압 변동분 만을 전력변환하여 보상 할 수 있는 LED 구동 드라이브 회로를 연구 하였다. 제안된 비절연 전압 변동분 보상회로는 기존 DC/DC 컨버터를 이용한 LED 구동 드라이브에 비해 효율이 개선 되었음을 실험을 통해 알 수 있었다.