• Korean Journal of Materials Research
• /
• v.10 no.9
• /
• pp.619-623
• /
• 2000

Alumina membrane was prepared by sol-gel coating method using boehmite powder(${\Upsilon}-AlOOH$). The supported and the unsupported alumina membrane were fabricated to investigate the phase transformation and change of microstructure. It is important to control the homogeneous pore size and distribution in application of filtering process. The ${\theta}-to\;{\alpha}-AL_2O_3$ phase transformation (XRD) and the change of microstructure was investigated using scanning electron microscopy(SEM). XRD patterns showed that the supported membrane had $100^{\circ}C$ higher ${\theta}-to\;{\alpha}-AL_2O_3$ transformation temperature compared to the unsupported membrane. The similar effect was also observed for microstructural change of the membrane.

• Korean Journal of Materials Research
• /
• v.26 no.8
• /
• pp.449-453
• /
• 2016

$HA(hydroxyapatite)/{\beta}-TCP$ (tricalcium phosphate) biomaterial (BCP; biphasic calcium phosphate) is widely used as bone cement or scaffolds material due to its superior biocompatibility. Furthermore, $NH_4HCO_3$ as a space holder (SH) has been used to evaluate feasibility assessment of porous structured BCP as bone scaffolds. In this study, using a spark plasma sintering (SPS) process at 393K and 1373K under 20MPa load, porous $HA/{\beta}-TCP$ biomaterials were successfully fabricated using $HA/{\beta}-TCP$ powders with 10~30 wt% SH, TiH2 as a foaming agent, and MgO powder as a binder. The effect of SH content on the pore size and distribution of the BCP biomaterial was observed by scanning electron microscopy (SEM) and a microfocus X-ray computer tomography system (SMX-225CT). The microstructure observations revealed that the volume fraction of the pores increased with increasing SH content and that rough pores were successfully fabricated by adding SH. Accordingly, the cell viabilities of BCP biomaterials were improved with increasing SH content. And, good biological properties were shown after assessment using Hanks balanced salt solution (HBSS).

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.4
• /
• pp.384-388
• /
• 2006

The adsorption ability of polar and toxic substance was greatly enhanced by treating activated carbon with acid solution and impregnating iron, copper, or silver by using in 0.1 M $FeSO_4{\cdot}7H_2O,\;CuSO_4{\cdot}5H_2O,\;AgNO_3$ 300 mL per activated carbon 50 g. Physical and chemical properties of the metal impregnated activated carbons were measured using specific surface area, pore volume and size distribution, scanning eletron microscope(SEM), adsorption isotherm. When activated carbon was treated with acid, the quantity of impregnated metal increased about 1.3 times since the micropores were converted to mesopores or macropores. Both the physical absorption by micropores and chemical absorption by metal ions could be achieved simultaneously with the metal impregnated activated carbon because the capacity of micro pores did not change even after metal ions were impregnated.

• Applied Chemistry for Engineering
• /
• v.9 no.7
• /
• pp.1047-1052
• /
• 1998

The porous alumina membrane was prepared from aluminum metal(99.8%) by anodic oxidation using DC power supply of constant current mode in aqueous solution of sulfuric, oxalic, phosphoric and chromic acid. Pore size and distribution, membrane thickness, morphology and crystal structure were examined with several anodizing conditions : reaction temperature, electrolyte concentration, current density and electrolyte type. It was found that ultrafiltration membrane was fabricated in electrolyte of sulfuric, and oxalic acid. On the other hand, microfiltration membrane was fabricated in electrolyte of phosphoric, and chromic acid. Also, it was shown that crystal structure of porous alumina membrane prepared in sulfuric, oxalic, and phosphoric acid was amorphous, whereas porous alumina membrane prepared in chromic acid had ${\gamma}$ type of crystal structure.

• Polymer(Korea)
• /
• v.25 no.6
• /
• pp.774-781
• /
• 2001

In order to reuse the waste matters, the polyester hybrid composites were fabricated with the waste stone (WSP) and waste tire (WTC). Before mixing, the waste fillers were treated with the silane coupling agent [${\gamma}$-methacryloxy propyl trimethoxy silane(${\gamma}$-MPS)] for enhancing the dispersion of the fillers and interfacial bonding with polymer matrix. Mechanical properties and morphologies of the resulted hybrid composites were investigated with the filler content. The hybrid composites containing surface treated fillers have high initial thermal decomposition temperature and low weight loss compared to the untreated one. The highest mechanical properties of composites were obtained with the ${\gamma}$-MPS (2 wt%) treated fillers. The porosity of composite increased with the content of organic filler which can be reduced by the silane surface treatment of fillers. The pore size distribution of the composites varied with the waste filler content.

• Transactions of the Korean hydrogen and new energy society
• /
• v.17 no.3
• /
• pp.347-352
• /
• 2006

분자전해질연료전지 내의 다공성 기체확산층은 반응가스의 확산과 전자이동통로의 역할을 수행할 뿐만 아니라 전기화학반응에 의해 공기극에서 생성된 수분(기상 혹은 액상)을 반응면으로부터 분리판 채널 방향으로 이동시켜 배출시키는 중요한 역할을 한다. 따라서 물관리를 통한 성능향상을 위해서는 기체 확산층의 구조 및 재료특성에 대한 심도 릴은 연구가 필요하다. 실제 단위전지 체결시 기체확산층은 분리판의 리브(rib)에 의해 눌리게 되며, 그 부분의 기공 크기 분포의 변화를 야기한다. 또한 리브 전단부분에서 탄소 섬유가 손상을 입으며, 탄소 섬유를 감싸고 있는 PTFE coating이 벗겨지게 되어 표면화학적 특성이 달라진다. 본 연구에서는 단위전지 체결 시 분리판에 의해 눌리는 기체확산층의 기공 크기 분포 변화를 측정하였으며, 기공의 소수성에서 친수성으로의 변화를 알아보았다. Mercury 기공 측정기와 PMI 기공 측정기는 큰 기공 분포의 변화에, 질소의 흡/탈착을 이용한 BET 방식은 작은 크기의 기공 분포 변화 관찰에 사용되었다. 체결압에 의한 탄소섬유의 구조적 변화와 아울러 표면의 습윤 정도의 변화를 XPS와 물/알콜 Uptake를 이용해 알아보았다. 이 연구를 바탕으로 물관리를 통한 연료전지 성능 향상을 위한 최적 GDL 선정에 기반이 되는 자료를 도출하였다.

• Journal of the Microelectronics and Packaging Society
• /
• v.16 no.4
• /
• pp.55-60
• /
• 2009

Porous silicon film is fabricated by electrochemical etching in a chemical mixture of HF and ethanol. Effects of Si type, Si resistivity, ultrasonic frequency, current density and etching time on surface morphology of PS film were studied. Electrochemical etching in ultrasonic bath promotes the uniformity of porous layer of Si. Frequency of ultrasonic was increased from 40 kHz to 130 kHz to obtain uniform pores on the Si surface. When current density was higher, the sizes of pores were larger. The new etching cell using back contact metal and current shield help to overcome nonhomogeneity and current crowding effect, and then leads to fabricate uniform pores on the Si surface. The distribution of pore size shows no notable tendency with etching time.

• Composites Research
• /
• v.29 no.5
• /
• pp.256-261
• /
• 2016

In this work, we have prepared the filter papers with the pitch-based activated carbon fibers and the binder fibers using wet-laid process. The influence of the binder fiber on the porosity of the filter papers has been investigated by using nitrogen adsorption isotherms at 77 K and a scanning electron microscope (SEM). As a result, the specific surface area has increased with an decrease in the content of binder fiber. It has been shown that the optimum ratio of pitch-based activated carbon fibers and the binder fibers is 70:30, resulting in high porosity, excellent bonding strength, large specific surface area ($650.4m^2/g$) and high noxious gas removal efficiency (86.9%). In addition, it has been observed that the mean pore size distribution of the fiber papers has not been affected by the binder fiber.

• Membrane Journal
• /
• v.29 no.6
• /
• pp.308-313
• /
• 2019

In this study, the Fe₃O₄/porous carbon composite was synthesized by hydrothermal method for removal of Cu²⁺ ions and the characteristic of Cu²⁺ ions removal was performed. The Fe₃O₄/porous carbon composite was investigated via using SEM, XRD for its morphology and structure. BET analysis was conducted to conform a specific area and pore size distribution of the composite. For the investigation of the performance for removal of Cu²⁺ ions in the solution, UV-vis spectrometer was used. It suggests that a synergetic effect between magnetic Fe₃O₄ and porous carbon shows an improvement for removal of Cu²⁺ ions.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.05a
• /
• pp.167-169
• /
• 2009

We have carried out quantitative structure and property analysis of the nanoporous structures of low dielectric constant (low-k) carbon-doped silicon oxide (SiCOH) films, which were deposited with plasma enhanced chemical vapor deposition (PECVD) using vinyltrimethylsilane (VTMS), divinyldimethylsilane (DVDMS), and tetravinylsilane (TVS) as precursor and oxygen as an oxidant gas. We found that the SiCOH film using VTMS only showed well defined spherical nanopores within the film after thermal annealing at $450^{\circ}C$ for 4 h. The average pore radius of the generated nanopores within VTMS SiCOH film was 1.21 nm with narrow size distribution of 0.2. It was noted that thermally labile $C_{x}H_{y}$ phase and Si-$CH_3$ was removed to make nanopore within the film by thermal annealing. Consequently, this induced that decrease of average electron density from 387 to $321\;nm^{-3}$ with increasing annealing temperature up to $450^{\circ}C$ and taking a longer annealing time up to 4 h. However, the other SiCOH films showed featureless scattering profiles irrespective of annealing conditions and the decreases of electron density were smaller than VTMS SiCOH film. Because, with more vinyl groups are introduced in original precursor molecule, films contain more organic phase with less volatile characteristic due to the crosslinking of vinyl groups. Collectively, the presenting findings show that the organosilane containing vinyl group was quite effective to deposit SiCOH/$C_{x}H_{y}$ dual phase films, and post annealing has an important role on generation of pores with the SiCOH film.