• Korean Journal of Ichthyology
• /
• v.18 no.3
• /
• pp.184-192
• /
• 2006

To investigate reproductive cycle of Tridentiger obscurus in Jeju, total 408 fish were collected in brackish area (May 2004 to August 2005) and total 271 fish were collected in tidal pool (July 2004 to August 2005), respectively. Water temperature ranged $11.0{\sim}21.6^{\circ}C$ in brackish area. Water temperature of tidal pool ($11.1{\sim}24.5^{\circ}C$) in 2005 was similar to that of brackish area although it were highest $30.1{\sim}29.2^{\circ}C$ from July to August in 2004. In brackish area, female gonadosomatic index (GSI) increased in April and maintained high values from May to August. The reproductive cycle can be grouped into the following successive stages in the ovary: immature (November to May), maturing (March to September), ripe and spawning (May to September), and degenerating (July to December). In the tidal pool, female GSI rapidly increased in April and maintained high values until July in 2005. However, it has been low in July 2004 when water temperature was highest. The reproductive cycle can be grouped into the following successive stages in the ovary: immature (August to April), maturing (March to August), ripe and spawning (March to July), and degenerating (July to August 2004 and August 2005). Fecundity of mature female ranged from 1,214 to 12,109 in brackish and ranged from 2,427 to 13,892 in tidal pool area. The fecundity of fish in the tidal pool was significantly higher than that of fish in brackish area. Fecundity was correlated positively with total length and body weigh. Although the large group (> 111 mm total length) in brackish area observed only in spawning season, one in the tidal pool observed from October 2004 until next spawning season. Frequency of the large group was 0 to 12% and 11.4 to 57.9% in brackish area and tidal pool, respectively. These results were indicated that gonadal development of T. obscurus was affected to water temperature and day length.

• Journal of Preventive Medicine and Public Health
• /
• v.7 no.1
• /
• pp.175-176
• /
• 1974

The purpose of this study was to survey bacteria which was known as a fecal bacteria living in the human and animal gastro and intestinal tract. The colony density of the fecal coliform and fecal streptococci was 280 and 130 in 100ml sample amounts reapectively. Staphylococcus aureus and Pseudomonas aeruginosa which is usually exist in swimming pool and was known as indicator of the pool water contamination was detected.

• Journal of Korean Society of Water and Wastewater
• /
• v.7 no.1
• /
• pp.29-36
• /
• 1993

The complex nature of low flow mixing in natural channels has been investigated using both laboratory experiments and the numerical solution of a proposed mathematical model that is based on a set of mass balance equations describing the mixing and mass exchange mechanisms. Laboratory experiments, which involved collection of channel geometry, hydraulic, and dye dispersion test data, were conducted in a model of four pool and riffle sequences in a 49-m long tilting flume. The experimental results show that flow over the model pool-riffle sequences is highly non-uniform. Concentration-time curves are significantly skewed with long tails. Comparison between measured and predicted concentration-time curves shows good agreement in the general shape, peak concentration and time to peak. The proposed model shows significant improvement over the conventional one-dimensional dispersion model in predicting natural mixing processes in open channels under low flow conditions through pools and riffles.

• Nuclear Engineering and Technology
• /
• v.56 no.7
• /
• pp.2474-2479
• /
• 2024

In-Vessel Retention (IVR) is a key technology to retain the molten core in the reactor vessel during severe accidents of Pressurized-water reactors (PWRs). In order to gain the safety margin of IVR, it is crucial to enhance the critical heat flux (CHF) of the reactor vessel, which is submerged in a water pool. To enhance the CHF, we have designed and additive-manufactured porous grid plates with a 3-D printer for design flexibility. We measured the CHF for the porous grid plate on the boiling heat transfer surface and found that the CHF was enhanced by 50 % more than that of the bare surface. The CHF enhanced more with a narrower grid pitch and a lower grid height. The visual observation study revealed that the vapor film was formed at the bottom of the grid plate.

• Nuclear Engineering and Technology
• /
• v.47 no.7
• /
• pp.907-914
• /
• 2015

The energetic steam explosion caused by contact between the high temperature molten core and water is one of the phenomena that may threaten the integrity of the containment vessel during severe accidents of light water reactors (LWRs). We examined the dependence of steam explosion loads in a typical reactor cavity geometry on selected model parameters and initial/boundary conditions by using a steam explosion simulation code, JASMINE, developed at Japan Atomic Energy Agency (JAEA). Among the parameters, we put an emphasis on the water pool depth that has significance in terms of accident mitigation strategies including cavity flooding. The results showed a strong correlation between the load and the premixed mass, defined as the mass of the molten material in low void zones (void fraction < 0.75). The jet diameter and velocity that comprise the flow rate were the primary factors to determine the premixed mass and the load. The water pool depth also showed a significant impact. The energy conversion ratio based on the enthalpy in the premixed mass was in a narrow range ~4%. Based on this observation, we proposed a simplified method for evaluation of the steam explosion load. The results showed fair agreement with JASMINE.

• Journal of Korea Water Resources Association
• /
• v.55 no.1
• /
• pp.99-109
• /
• 2022

This study was intended to suggest the applicability of stepped boulder fishway using the concept of traditional boulder weir, focusing on the problems of existing concrete pool-and-weir fishways installed in mountain streams. To achieve this purpose, a stepped boulder fishway was designed and constructed as a pilot project in consideration of ascending capacity of the selected target fishes. Under the given discharge conditions, the hydraulic characteristics of the fishway were investigated in the field, and the characteristics and ascending capacity of the fishes were compared and analyzed. The fishway had a short length and steep slope, but the mean drops between each baffle were the range of 0.15 to 0.29 m, and this range satisfied the limit condition of about 0.40 m, which was in the limit of the drop that target fishes can ascend. The mean velocities of each baffle and pool were 0.82 to 0.87 m/sec and 0.13 to 0.24 m/sec. This result satisfied the conditions of burst speed (10 to 30 times of body length) and mean velocity of the resting pool (7 to 25% of burst speed) for target fishes. Since the bottom surface of the pool formed of boulders had a gentle reverse slope and rotational flow did not occur, the efficiency of fishway can be increased, and it will also be possible to solve the maintenance problem by flushing bed materials.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2002.10a
• /
• pp.155.1-155
• /
• 2002

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.1
• /
• pp.81-88
• /
• 2014

An experimental study is performed to obtain an average heat transfer coefficient around the perimeter of a near horizontal tube. For the test a stainless steel tube of 50.8 mm diameter submerged in water at atmospheric pressure is used. Both subcooled and saturated pool boiling conditions are considered and the inclination angle of the tube is changed from the horizontal position to $9^{\circ}$ in steps of $3^{\circ}$. In saturated water, the local boiling heat transfer coefficient at the azimuthal angle of $90^{\circ}$ from the tube bottom can be regarded as the average of the coefficients regardless of the tube inclination angles. However, when the water is subcooled the location for the average heat transfer coefficient depends on the inclination angle and the heat flux. It is explained that the major mechanisms changing the heat transfer are closely related with the intensity of the liquid agitation and the generation of big size bubbles through bubble coalescence.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.23 no.3
• /
• pp.194-200
• /
• 2011

In this work, nucleate pool boiling heat transfer coefficients(HTCs) of pure water are measured on horizontal 26 fpi low fin, Turbo-B and Thermoexcel-E square surfaces of 9.53 mm length. HTCs are taken from 10 $kW/m^2$ to critical heat flux for all surfaces. Test results show that critical heat fluxes(CHFs) of all enhanced surfaces are greatly improved as compared to that of a plain surface. CHFs of water on the 26 fpi low fin surface, Thermoexcel-E surface, and Turbo-B are increased up to 320%, 275%, and 150% as compared to that of the plain surface, respectively. CHF of the Turbo-B enhanced surface is lower than that of the 26 fpi low fin surface due to the surface geometry. The heat transfer enhancement ratios of the Thermoexcel-E surface, low fin surface and Turbo-B enhanced surface are 1.6~2.9, 1.6~2.1, 1.4~1.7 respectively in the range of heat fluxes tested. Judging from these results, it can be said that these types of enhanced surfaces can be used in heat transfer applications at high heat fluxes.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.6
• /
• pp.421-429
• /
• 2012

This study was aimed to analyze the water quality characteristics of the Hwapocheon Stream and to be utilized in the further related research. Water in the upper stream became a dammed pool due to the existence of 14 weirs, and pollutants such as both sewage and irrigation water were introduced into the mainstream passing through farming settlements and agricultural land. For these reasons, filamentous cyanobacteria (Oscillatoria sp.) bloomed at the bottom of the dammed pool. Also in the midstream and downstream, tributaries with high pollutant concentrations [e.g., Comocheon (T3) and Yongdeokcheon (T8)] were inflowed, and had a negative impact on water quality of the mainstream, especially nitrogen and phosphorus. In the Hwapocheon Stream, dissolved oxygen (DO) decreased, and suspended solid (SS) increased toward the downstream. The result showed that hydraulic retention time, SS, COD, and concentration of $NH_4{^+}$ were important water quality factors of the Hwapocheon Stream. The high concentration of benthic organic matter and rich in attached algae in the core of Hwapo-wetland were expected to give impact on the water quality of the mainstream. In the spatial manner, water quality showed increasing trend in the weir zone, and it was constant or decreased trend in wetland. In the seasonal manner, the nutrient concentrations were high in the winter dry season, however, the organic matter concentrations were high in spring and summer. Generally, the concentrations of phytoplankton value were $40{\mu}g\;chl-{\alpha}/L$ or less in all reaches except for the high concentrations in the weir and wetland area in June.