• Advances in concrete construction
• /
• v.6 no.6
• /
• pp.561-583
• /
• 2018

A variety of polycarboxylate ether (PCE)-based superplasticizers are commercially available. Their influence on the rheological retention and slump loss in respect of concrete differ considerably. Fluidity and slump loss are the cardinal features responsible for the quality of concrete. These are related to the dispersion of cement particles and the hydration process which are greatly influenced by type of polycarboxylate ether (PCE)-based superplasticizers. On the backdrop of relatively less studies in the context of rheological retention of high strength self-consolidating concrete (HS-SCC), the experimental investigations were carried out aiming at quantifying the effect of the six different PCE polymers (PCE 1-6) on the rheological retention of HS-SCC mixes containing two types of Ordinary Portland Cements (OPC) and unwashed crushed sand as the fine aggregate. The tests that were carried out included $T_{500}$, V-Funnel, yield stress and viscosity retention tests. The supplementary cementitious materials such as fly ash (FA) and micro-silica (MS) were also used in ternary blend keeping the mix paste volume and flow of concrete constant. Low water to binder ratio was used. The results reveal that not only the PCEs of different polymer groups behave differently, but even the PCEs of same polymer groups also behave differently. The study also indicates that the HS-SCC mixes containing PCE 6 and PCE 5 performed better as compared to the mixes containing PCE 1, PCE 2, PCE 3 and PCE 4 in respect of all the rheological tests. The PCE 6 is a new class of chemical admixtures known as Polyaryl Ether (PAE) developed by BASF to provide better rheological properties in even in HS-SCC mixes at low water to binder mix. In the present study, the PCE 6, is found to help not only in reduction in the plastic viscosity and yield stress, but also provide good rheological retention over the period of 180 minutes. Further, the early compressive strength properties (one day compressive strength) highly depend on the type of PCE polymer. The side chain length of PCE polymer and the fineness of the cement considerably affect the early strength gain.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.5
• /
• pp.441-450
• /
• 2022

In this study, the fluidity and strength characteristics of NSC mortar according to the type and rate of addition of superplasticizer were analyzed to secure the fluidity of NSC composed of only slag and ash. Through the flow test, it was found that the fluidity of NSC was related to the basicity according to the binder condition, and the lower the reactivity, the higher the fluidity. When polycarboxylate is added, NSC mortar is considered to be more advantageous than plain mortar in terms of securing fluidity. As a result of the strength tests of NSC mortar containing Lignin or Polycarboxylate superplasticizer, it was found that the strength tends to increase as the basicity increases. In addition, when polycarboxylate is added, it is judged that the NSC mortar can secure adequate fluidity and strength at the same time. Through this experiment, an appropriate binder condition that satisfies the flowability while securing the strength was derived.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.3
• /
• pp.528-537
• /
• 1999

The purpose of this study was to analyze and compare the bond strengths between stainless steel plate and zinc phosphate cement, polycarboxylate cement and glass ionomer cement, which are frequently used for cementation of stainless steel crowns. Three cementing materials were glued to the poles standing above stainless steel plate, bovine teeth, light cured glass ionomer restorative material and amalgam. And the tensile bond strengths between them were measured with universal testing machine and the results were statistically processed using ANOVA and Student t-test. The obtained results were as follows : 1. On stainless steel plate, glass ionomer cement and polycarboxylate cement showed higher tensile bond strengths compared to zinc phosphate cement, with no significant difference between the former two. 2. On the surface of bovine teeth and glass ionomer restorative material, glass ionomer cement showed highest bond strength, followed by polycarboxylate cement and zinc phosphate cement in order. 3. For amalgam restoration, polycarboxylate cement and glass ionomer cement showed higher tensile bond strengths than zinc phosphate cement, with no significant difference between the former two.

• The Journal of the Korean dental association
• /
• v.25 no.8 s.219
• /
• pp.749-767
• /
• 1987

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.7
• /
• pp.4644-4652
• /
• 2014

This study examined the effects of the cement type and sand to cement ratio on the properties of grout for offshore PSC structures. Types I and III cement were used and the sand to cement ratio was varied from 0.5 to 1.5. When type I cement was used, considerable bleeding occurred on the all S/C after 3 hours and 20 hours. When type III cement was used, bleeding was reduced but the flowability decreased. A comparison of a superplasticizer containing naphthalene with that containing polycarboxylate showed that the problem of flowability could be solved using polycarboxylate.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.10 no.1
• /
• pp.35-45
• /
• 1983

This study was undertaken to evaluate the pulpal responses to the intermediate restorative materials such as Zinc phosphate cement, Polycarboxylate cement, IRM (zinc oxide eugenol cement), Dycal, Life, Cresatin, and Fluoride in caivties which were cut with high speed instrument. 5 dogs were used as experimental animals and devided into 8 groups. The intervals of observaobservation ranged 3 days, 1, 3, 4, 8 weeks after experiment respectively. The specimens were fixed with 10% formalin and decalcified in 5% nitric acid. All slides were stained with hemtoxylin-eosin and examined histopathologically. The results were as follows: 1. In control group, severe vacuolar degeneration and atrophy of odontoblasts were seen in 3 days, hemorrhage and congestion continued until 8 weeks. Necrosis of odontoblastic layer was seen in zinc phosphate cement group and polycarboxylate cement group. 2. In dycal group, vacuolar degeneration and atrophy of odontoblast were not seen. but in Life group, these were seen in 3 days and partially continued until 3 weeks. In 4 weeks, regeneration of odontoblast was occured. 3. In Crcsatin group, there was no pathosis except odontoblastic displacement. In Fluoride group, vacuolar degeneration of odontoblast was seen and soon disappeared. As compared with control group, pathological change of the pulp tissue in experimental group were decreased after amalgam restoration.

• Journal of the Korean Ceramic Society
• /
• v.41 no.5
• /
• pp.417-424
• /
• 2004

Polycarboxylate type superplasticizers (PCA) with different graft chain (Polyethylene oxide) length were synthesized by Methoxypoly (ethyleneglycol)monomethacrylate (MPEGMAA) and methacrylic acid (MAA). The effects of PCA on the hydration of Ordinary Portland Cement (OPC) were investigated by Fourier Transform Infrared Spectroscopy (FT-IR), X-Ray Diffraction (XRD) and Differential Scanning Calorimetry (DSC) techniques. The effect of graft chain length of PCA on the hydration of OPC was different at early age, but, at long age, was similar. The ratio of relative peak intensity, (I［001］/I［101］), of Ca(OH)$_2$ compared with OPC also was reduced by PCA addition.

• Journal of the Korean Ceramic Society
• /
• v.48 no.6
• /
• pp.504-509
• /
• 2011

In this study, the effect of superplasticizers on the dispersibility and hydration properties of cement with silica fume were investigated. Superplasticizers are used Naphthalene type, Ligno-sulfate type and polycarboxylate type. Compared with plastic viscosity of cement paste without superplasticizers(Plain), plastic viscosity of cement paste with superplasticizers are reduced and yield stress of cement pastes with each superplasticizer is increased rather than Plain. And then, plastic viscosity of cement paste with Naphthalene type superplasticizer was the least of all types. Compared with other two types, setting and hydration of cement paste with Polycarboxylate type(PC) superplasticizer is very fast. At compressive strength after 3-day, PC is higher than other two types, But, compressive strength of after 7-day and 28-day, PC is smaller than other two types.

• Restorative Dentistry and Endodontics
• /
• v.13 no.2
• /
• pp.307-322
• /
• 1988

The purpose of this study is to evaluate the pulpal responses to the base materials such as zinc oxide eugenol cement, calcium hydroxide, zinc phosphate cement, polycarboxylate cement and glass ionomer cement. The 100 caries free dog teeth were devided into 2 groups by remaining dentin thickness (Group A: 0.4-0.6 mm, Group B: 0.8-1.0 mm) and each group were devided into 5 subgroups. The intervals of observation period are 3days, 1 week, 2 weeks, 4 weeks and 8 weeks respectively after experiment. The specimens were fixed with 10% formalin and decalcifed in 5% nitric acid. All specimens were stained with Hematoxylin-Eosin and examined histopathologically. The results were as follows. 1. In group A, atropy or hyperplasia in odontoblasts were seen in zinc oxide eugenol cement, calcium hydroxide and zinc phosphate cement. No changes in odontoblasts were seen in polycarboxylate cement and glass ionomer cement. 2. In group A, increase of predentin were seen in all experimental materials. 3. In group A, vascular congestion were seen in all experimental materials and inflammation were seen on 3 days in zinc oxide eugenol cement, 8 weeks in zinc phosphate cement and hemorrage were seen on 3 days in zinc phosphate cement. 4. In group B, changes of odontoblasts were not seen all experimental materials. 5. In group B, increase of predentin and vascular congestion were seen in all experimental materials but inflammation were not seen.

• The Journal of Advanced Prosthodontics
• /
• v.7 no.6
• /
• pp.475-483
• /
• 2015

PURPOSE. The objective of this study was to evaluate the influence of various cement types on the stress distribution in monolithic zirconia crowns under maximum bite force using the finite element analysis. MATERIALS AND METHODS. The models of the prepared #46 crown (deep chamfer margin) were scanned and solid models composed of the monolithic zirconia crown, cement layer, and prepared tooth were produced using the computer-aided design technology and were subsequently translated into 3-dimensional finite element models. Four models were prepared according to different cement types (zinc phosphate, polycarboxylate, glass ionomer, and resin). A load of 700 N was applied vertically on the crowns (8 loading points). Maximum principal stress was determined. RESULTS. Zinc phosphate cement had a greater stress concentration in the cement layer, while polycarboxylate cement had a greater stress concentration on the distal surface of the monolithic zirconia crown and abutment tooth. Resin cement and glass ionomer cement showed similar patterns, but resin cement showed a lower stress distribution on the lingual and mesial surface of the cement layer. CONCLUSION. The test results indicate that the use of different luting agents that have various elastic moduli has an impact on the stress distribution of the monolithic zirconia crowns, cement layers, and abutment tooth. Resin cement is recommended for the luting agent of the monolithic zirconia crowns.