References
- De Jager N, Pallav P, Feilzer AJ. The influence of design parameters on the FEA-determined stress distribution in CADCAM produced all-ceramic dental crowns. Dent Mater 2005;21:242-51. https://doi.org/10.1016/j.dental.2004.03.013
- Piconi C, Maccauro G. Zirconia as a ceramic biomaterial. Biomaterials 1999;20:1-25. https://doi.org/10.1016/S0142-9612(98)00010-6
- Shimizu K, Oka M, Kumar P, Kotoura Y, Yamamuro T, Makinouchi K, Nakamura T. Time-dependent changes in the mechanical properties of zirconia ceramic. J Biomed Mater Res 1993;27:729-34. https://doi.org/10.1002/jbm.820270605
- Luthardt RG, Holzhuter M, Sandkuhl O, Herold V, Schnapp JD, Kuhlisch E, Walter M. Reliability and properties of ground Y-TZP-zirconia ceramics. J Dent Res 2002;81:487-91. https://doi.org/10.1177/154405910208100711
- Blatz MB, Sadan A, Martin J, Lang B. In vitro evaluation of shear bond strengths of resin to densely-sintered high-purity zirconium-oxide ceramic after long-term storage and thermal cycling. J Prosthet Dent 2004;91:356-62. https://doi.org/10.1016/j.prosdent.2004.02.001
- Guess PC, Zavanelli RA, Silva NR, Bonfante EA, Coelho PG, Thompson VP. Monolithic CAD/CAM lithium disilicate versus veneered Y-TZP crowns: comparison of failure modes and reliability after fatigue. Int J Prosthodont 2010;23:434-42.
- McLaren EA, Terry DA. CAD/CAM systems, materials, and clinical guidelines for all-ceramic crowns and fixed partial dentures. Compend Contin Educ Dent 2002;23:637-41, 644, 646 passim; quiz 654.
- Luthardt RG, Sandkuhl O, Herold V, Walter MH. Accuracy of mechanical digitizing with a CAD/CAM system for fixed restorations. Int J Prosthodont 2001;14:146-51.
- Preis V, Behr M, Hahnel S, Handel G, Rosentritt M. In vitro failure and fracture resistance of veneered and full-contour zirconia restorations. J Dent 2012;40:921-8. https://doi.org/10.1016/j.jdent.2012.07.010
- Ha SR, Kim SH, Han JS, Yoo SH, Jeong SC, Lee JB, Yeo IS. The influence of various core designs on stress distribution in the veneered zirconia crown: a finite element analysis study. J Adv Prosthodont 2013;5:187-97. https://doi.org/10.4047/jap.2013.5.2.187
- Li X, Cao Z, Qiu X, Tang Z, Gong L, Wang D. Does matching relation exist between the length and the tilting angle of terminal implants in the all-on-four protocol? stress distributions by 3D finite element analysis. J Adv Prosthodont 2015;7:240-8. https://doi.org/10.4047/jap.2015.7.3.240
- Spazzin AO, Galafassi D, de Meira-Junior AD, Braz R, Garbin CA. Influence of post and resin cement on stress distribution of maxillary central incisors restored with direct resin composite. Oper Dent 2009;34:223-9. https://doi.org/10.2341/08-73
- Soares CJ, Raposo LH, Soares PV, Santos-Filho PC, Menezes MS, Soares PB, Magalhaes D. Effect of different cements on the biomechanical behavior of teeth restored with cast dowel-and-cores-in vitro and FEA analysis. J Prosthodont 2010;19:130-7. https://doi.org/10.1111/j.1532-849X.2009.00527.x
- Pilo R, Cardash HS. In vivo retrospective study of cement thickness under crowns. J Prosthet Dent 1998;79:621-5. https://doi.org/10.1016/S0022-3913(98)70067-8
- Reich S, Wichmann M, Nkenke E, Proeschel P. Clinical fit of all-ceramic three-unit fixed partial dentures, generated with three different CAD/CAM systems. Eur J Oral Sci 2005;113:174-9. https://doi.org/10.1111/j.1600-0722.2004.00197.x
- Proos KA, Swain MV, Ironside J, Steven GP. Influence of cement on a restored crown of a first premolar using finite element analysis. Int J Prosthodont 2003;16:82-90.
- Ferrario VF, Sforza C, Zanotti G, Tartaglia GM. Maximal bite forces in healthy young adults as predicted by surface electromyography. J Dent 2004;32:451-7. https://doi.org/10.1016/j.jdent.2004.02.009
- Nishigawa K, Bando E, Nakano M. Quantitative study of bite force during sleep associated bruxism. J Oral Rehabil 2001;28:485-91. https://doi.org/10.1046/j.1365-2842.2001.00692.x
- Manso AP, Silva NR, Bonfante EA, Pegoraro TA, Dias RA, Carvalho RM. Cements and adhesives for all-ceramic restorations. Dent Clin North Am 2011;55:311-32, ix. https://doi.org/10.1016/j.cden.2011.01.011
- Palacios RP, Johnson GH, Phillips KM, Raigrodski AJ. Retention of zirconium oxide ceramic crowns with three types of cement. J Prosthet Dent 2006;96:104-14. https://doi.org/10.1016/j.prosdent.2006.06.001
- Blatz MB, Sadan A, Kern M. Resin-ceramic bonding: a review of the literature. J Prosthet Dent 2003;89:268-74. https://doi.org/10.1067/mpr.2003.50
- Ernst CP, Cohnen U, Stender E, Willershausen B. In vitro retentive strength of zirconium oxide ceramic crowns using different luting agents. J Prosthet Dent 2005;93:551-8. https://doi.org/10.1016/j.prosdent.2005.04.011
- Pospiech P. All-ceramic crowns: bonding or cementing?. Clin Oral Investig 2002;6:189-97. https://doi.org/10.1007/s00784-002-0183-2
- Thompson JY, Stoner BR, Piascik JR, Smith R. Adhesion/cementation to zirconia and other non-silicate ceramics: where are we now?. Dent Mater 2011;27:71-82. https://doi.org/10.1016/j.dental.2010.10.022
- Kamposiora P, Papavasilious G, Bayne SC, Felton DA. Finite element analysis estimates of cement microfracture under complete veneer crowns. J Prosthet Dent 1994;71:435-41. https://doi.org/10.1016/0022-3913(94)90179-1
- Shahrbaf S, vanNoort R, Mirzakouchaki B, Ghassemieh E, Martin N. Effect of the crown design and interface lute parameters on the stress-state of a machined crown-tooth system: a finite element analysis. Dent Mater 2013;29:e123-31. https://doi.org/10.1016/j.dental.2013.04.002
- Rekow ED, Harsono M, Janal M, Thompson VP, Zhang G. Factorial analysis of variables influencing stress in all-ceramic crowns. Dent Mater 2006;22:125-32. https://doi.org/10.1016/j.dental.2005.04.010
- May LG, Kelly JR, Bottino MA, Hill T. Effects of cement thickness and bonding on the failure loads of CAD/CAM ceramic crowns: multi-physics FEA modeling and monotonic testing. Dent Mater 2012;28:e99-109. https://doi.org/10.1016/j.dental.2012.04.033
- Ayad MF, Rosenstiel SF, Salama M. Influence of tooth surface roughness and type of cement on retention of complete cast crowns. J Prosthet Dent 1997;77:116-21. https://doi.org/10.1016/S0022-3913(97)70223-3
- Pameijer CH. A review of luting agents. Int J Dent 2012;2012:752861.
Cited by
- Elastic Properties of Lithium Disilicate Versus Feldspathic Inlays: Effect on the Bonding by 3D Finite Element Analysis pp.1059941X, 2018, https://doi.org/10.1111/jopr.12550
- Post and core build-ups in crown and bridge abutments: Bio-mechanical advantages and disadvantages vol.9, pp.3, 2017, https://doi.org/10.4047/jap.2017.9.3.232
- performance and fracture strength of thin monolithic zirconia crowns vol.10, pp.2, 2018, https://doi.org/10.4047/jap.2018.10.2.79
- Finite Element Analysis of Novel Separable Fixture for Easy Retrievement in Case with Peri-Implantitis vol.12, pp.2, 2019, https://doi.org/10.3390/ma12020235
- Methodology in specimen fabrication for in vitro dental studies: Standardization of extracted tooth preparation vol.9, pp.7, 2015, https://doi.org/10.4317/jced.54020
- Evaluation of stress distribution in bone and three-unit fixed implant-supported prostheses with zirconia and titanium abutments: A 3D finite element analysis vol.12, pp.4, 2015, https://doi.org/10.15171/joddd.2018.040
- Optimized Dental Implant Fixture Design for the Desirable Stress Distribution in the Surrounding Bone Region: A Biomechanical Analysis vol.12, pp.17, 2015, https://doi.org/10.3390/ma12172749
- Evaluation of zirconia and zirconia‐reinforced glass ceramic systems fabricated for minimal invasive preparations using a novel standardization method vol.32, pp.6, 2020, https://doi.org/10.1111/jerd.12570
- Minimal tooth preparation for posterior monolithic ceramic crowns: Effect on the mechanical behavior, reliability and translucency vol.37, pp.3, 2015, https://doi.org/10.1016/j.dental.2020.11.001
- Effects of sintering time on translucency and color of translucent zirconia ceramics vol.33, pp.4, 2021, https://doi.org/10.1111/jerd.12723