• Carbon letters
• /
• 제15권1호
• /
• pp.71-76
• /
• 2014

Activated carbon nanofibers (ACNF) were prepared from polyacrylonitrile (PAN)-based nanofibers using $CO_2$ activation methods with varying activation process times. The surface and structural characteristics of the ACNF were observed by scanning electron microscopy and X-ray diffraction, respectively. $N_2$ adsorption isotherm characteristics at 77 K were confirmed by Brunauer-Emmett-Teller and Dubinin-Radushkevich equations. As experimental results, many holes or cavernous structures were found on the fiber surfaces after the $CO_2$ activation as confirmed by scanning electron microscopy analysis. Specific surface areas and pore volumes of the prepared ACNFs were enhanced within a range of 10 to 30 min of activation times. Performance of the porous PAN-based nanofibers as an electrode for electrical double layer capacitors was evaluated in terms of the activation conditions.

• Carbon letters
• /
• 제8권1호
• /
• pp.43-48
• /
• 2007

The influences of various carbonization temperatures on electrical resistivity and morphologies of polyacrylonitrile (PAN)-based nanofiber webs were studied. The diameter size distribution and morphologies of the nanofiber webs were observed by a scanning electron microscope. The electrical resistivity behaviors of the webs were evaluated by a volume resistivity tester. From the results, the volume resistivity of the carbon webs was ranged from $5.1{\times}10^{-1}\;{\Omega}{\cdot}cm$ to $3.0{\times}10^{-2}\;{\Omega}{\cdot}cm$, and the average diameter of the fiber webs was varied in the range of 310 to 160 nm with increasing the carbonization temperature. These results could be explained that the graphitic region of carbon webs was formed after carbonization at high temperatures. And the amorphous structure of polymeric fiber webs was significantly changed to the graphitic crystalline, resulting in shrinking the size of fiber diameters.

• 멤브레인
• /
• 제9권1호
• /
• pp.17-24
• /
• 1999

본 연구에서는 관형 상용막(ultrafiltration (UF), nanofiltration(NF)을 이용하여 우유를 농축하고 농축 성분의 변화를 알아보았다. 친수성막(sulfonated polysulfone (SPSf), polyacrylonitrile(PAN), cellulose acetate(CA)) 의 경우에는 투과유의 투과속도 감소가 완만하고 소수성막의 경우에는 투과속도 감소가 심하였다. UF 농축이 경우 전고형분, 단백질,지방 미네랄은 농축에 따라 증가하고 탄수화물은 감소하였다. NF 농축의 경우 UF와 같은 경향을 보였지만 탄수화물의 감소경향이 훨씬 적었다.

• 한국염색가공학회지
• /
• 제12권5호
• /
• pp.295-300
• /
• 2000

The melting behavior of hydrated polyacrylonitrile (PAN) and the rheological properties of hydrated PAN melt were investigated using DSC md modified capillary rheometer. With increasing the water content, Tm of the hydrated PAN was rapidly decreased and finally levelled off above a critical water content. However, the melt viscosity was further decreased even above the critical water content. The hydrated PAN melt showed a typical shear thinning behavior. In arrhenius plot, when the hydrated PAN melt was supercooled, it exhibited a different dependency on temperature from that above melting temperature.

• Carbon letters
• /
• 제12권1호
• /
• pp.26-30
• /
• 2011

For polyacrylonitrile (PAN) based carbon fiber (CF) process, we developed a lab scale wet spinning line and a continuous tailor-made stabilization system with ten columns for controlling temperature profile. PAN precursor was spun with a different spinning rate. PAN spun fibers were stabilized with a total duration of 45 to 110 min at a given temperature profile. Furthermore, a stabilization temperature profile was varied with the last column temperature from 230 to $275^{\circ}C$. Stabilized fibers were carbonized in nitrogen atmosphere at $1200^{\circ}C$ in a furnace. Morphologies of spun and CFs were observed using optical and scanning electron microscopy, respectively. Tensile properties of resulting CFs were measured. The results revealed that process conditions such as spinning rate, stabilization time, and temperature profile affect microstructure and tensile properties of CFs significantly.

• 방사선산업학회지
• /
• 제10권1호
• /
• pp.1-5
• /
• 2016

In this study, the effect of high-energy proton irradiation on the optical properties of polyacrylonitrile (PAN) films was investigated. PAN thin films spin-coated on a substrate were irradiated 150 keV proton ions at various fluences. The changes in the chemical structure and optical properties were investigated by FT-IR and UV-vis spectroscopy. The results of the FT-IR analysis revealed that the cyclization reaction took place by proton irradiation and the degree of cyclization increased with an increasing fluence. Based on the UV-vis analysis, the optical band gap of PAN decreased from 2.84 to 2.52 eV with an increasing fluence due to the formation of carbon clusters by proton irradiation. In addition, the number of carbon atoms per carbon cluster and the number of carbon atoms per conjugation length were found to be increased with an increasing fluence.

• 멤브레인
• /
• 제29권3호
• /
• pp.140-146
• /
• 2019

본 연구에서는 다공성 Polyacrylonitrile (PAN) 중공사막을 지지체막으로 하여 Poly styrene sulfonic acid (PSSA)와 polyethyleneimine (PEI)을 이용하여 layer-by-layer법으로 선택층을 형성시켰다. 코팅용액에 Mg염을 첨가하여 염석법(salting out method)을 이용하였다. 코팅용액의 이온세기, 고분자 농도, 코팅시간 등을 달리하여 나노여과막을 제조하였으며 NaCl, $MgCl_2$, $CaSO_4$ 100 mg/L를 공급액으로 하여 2 atm의 구동 압력에서 투과도와 염 배제율을 평가하였다. PSSA 20,000 ppm, 코팅시간 3분, 이온세기 1.0, PEI 30,000 ppm, 코팅시간 1분, 이온세기 0.1의 조건으로 코팅한 막이 가장 우수한 성능을 보여 주었다. 100 ppm의 NaCl, $MgCl_2$, $CaSO_4$ 공급액에서 각각 20.4, 19.4, 18.7 LMH의 투과도와 67, 90, 66.6%의 염 배제율을 나타내었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.307.2-307.2
• /
• 2016

In this study, we synthesized Au nanoparticles (AuNPs) in polyacrylonitrile (PAN) thin films using a simple annealing process in the solid phase. The synthetic conditions were systematically controlled and optimized by varying the concentration of the Au salt solution and the annealing temperature. X-ray photoelectron spectroscopy (XPS) confirmed their chemical state, and transmission electron microscopy (TEM) verified the successful synthesis, size, and density of AuNPs. Au nanoparticles were generated from the thermal decomposition of the Au salt and stabilized during the cyclization of the PAN matrix. For actual device applications, previous synthetic techniques have required the synthesis of AuNPs in a liquid phase and an additional process to form the thin film layer, such as spin-coating, dip-coating, Langmuir-Blodgett, or high vacuum deposition. In contrast, our one-step synthesis could produce gold nanoparticles from the Au salt contained in a solid matrix with an easy heat treatment. The PAN:AuNPs composite was used as the charge trap layer of an organic nano-floating gate memory (ONFGM). The memory devices exhibited a high on/off ratio (over $10^6$), large hysteresis windows (76.7 V), and a stable endurance performance (>3000 cycles), indicating that our stabilized PAN:AuNPs composite film is a potential charge trap medium for next generation organic nano-floating gate memory transistors.

• 대한기계학회논문집B
• /
• 제39권11호
• /
• pp.885-890
• /
• 2015

나노물질은 작은 크기와 공기필터 응용장치의 초고표면적과 함께 기계적, 물리적, 화학적 특성을 가진다. 전기방사는 나노섬유 중합체를 제조하는데 있어 가장 효율적인 기술로 인식되어왔다. 최적의 제조 조건을 찾기 위해, 여러 전기방사 공정 파라미터의 효과에 따른 폴리아크릴로니트릴(PAN) 나노섬유의 직경, 성향 및 분포를 분석했다. 층간파괴 인성 향상시키고 히트롤러로 적층된 부직포의 형태로 박리를 억제하고, PAN 나노섬유 공기필터의 여과효율과 압력강하 성능을 실험적으로 평가하였다.

• 한국진공학회지
• /
• 제21권1호
• /
• pp.41-47
• /
• 2012

본 연구에서는 전기방사법(electrospinning method)을 이용하여 다중벽 탄소나노튜브(multi-walled carbon nanotubes, MWCNTs)가 첨가된 polyacrylonitrile (PAN)과 poly (methyl methacrylate) (PMMA) 고분자 복합 나노섬유를 합성하였다. 합성 과정에서 고분자 물질의 농도와 인가전압의 변화가 나노섬유의 합성에 미치는 영향을 조사하여 최적화된 고분자 나노섬유 합성 조건을 확립하였다. 또한, MWCNTs의 첨가량의 변화에 따른 복합 나노섬유의 구조적 특징을 주사전자현미경(scanning electron microscopy)과 투과전자현미경(transmission electron microscopy)을 통해 분석하였으며, 기계적 강도를 조사하였다. 5 wt%의 MWCNTs가 첨가된 경우, 인장강도(tensile strength)와 영률(Young's modulus)이 PAN 복합 나노섬유는 500%, 27% 향상되었으며, PMMA 복합 나노섬유는 250%, 1,017% 향상된 것을 확인할 수 있었다.