• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.297-298
• /
• 2011

Metal/poly (4,4'-aminotriphen-ylene hexafluoroisopropylidenediphthalimide) (TP6F PI)/metal structure exhibited an electrically volatile phase transition with high (OFF) or low (ON) resistive states when voltage between electrodes swept. Here, we demonstrate a noble set-up in which holes are injected by photoelectron emission process during the voltage sweep instead of direct charge carrier injection via metal electrode, which enables direct investigation into changed electronic structures of TP6F PI both in ON and OFF states using photoemission spectroscopy methods. In the I-V measurement, TP6F PI shows a non-volatile behavior. In spectroscopic results, this non-volatile behavior is leaded from the structural modification of the O=C double bond in phthalimide of TP6F PI by hole injection.

• Textile Coloration and Finishing
• /
• v.8 no.4
• /
• pp.4-10
• /
• 1996

Poly(4-morphonylphosphonate of bisphenol A) (PMPB) was synthesized by the interfacial polymerization of phosphonic dichloride, 4-morphonyl (PDCM) and bisphenol A in an aqueous-organic biphasic system. Synthesized polymer was found to be PMPB by using EA, FT-IR and $^{1}$H-NMR. Prepared PMPB had different values of molecular weight depending on the solubility in the organic phase: the higher the solubility, the higher the molecular weight. PMPB is amorphous and its thermal decomposition temperature is about 35$0^{\circ}C$. PMPB is congenial to application to polypropylene by blending because of no reaction with polypropylene.

• Proceedings of the Optical Society of Korea Conference
• /
• 1995.06a
• /
• pp.161-168
• /
• 1995

Nonlinear optical absorption in solid films of poly(3-octyl thiophene) (P3OT) sensitized with methanofullerene was inverstigated for wacelengths from 620 to 960nm. The nonlinear absorption is ehnanced over that in either of the component materials by more than two orders orders of magitude at 760nm. The large nonlinearity results from effient photoinduced interm olecular charge transfer from P3OT to methanofullerene, followed by absorption in the charge separated excited state. P3OT/fullerene films are promising as reverse saturable absorbers and the optical limiting performance is demonstrated at 760nm.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2538-2539
• /
• 2000

송배전 system에서 모선관리 및 운용에 있어 초고압 차단기는 매우 중요한 역할을 담당하고 있다. 선로의 운전상태와 차단기의 투입 상황 인식 및 확인은 필수요건이다. 이러한 차단기의 운전상태를 전자적인 신호성분을 검지하여 비접촉식 개폐 확인 unit가 필수적으로 대두되고 있다. 이 unit는 고신뢰성, 고안정성을 요구하며 정확한 표시가 필요하다. 송배전의 모든 System에 적용 가능하며 적용시 선로와 차단기의 운전 및 보수에 절대적인 안정성을 제공한다.

• Fisheries and Aquatic Sciences
• /
• v.24 no.11
• /
• pp.370-374
• /
• 2021

In this paper, we have reported the expression of immune-related gene in a new embryonic cell line (FGBC8) which was established from olive flounder (Paralichthys olivaceus) embryos. To explore the cell biotechnological applicability, the FGBC8 cells were incubated with the several mitogens such as lipopolysaccharide (LPS), polyinosinic-polycytidylic acid (poly I:C), flagellin, and interferon (IFN)-γ. After incubation, the expression of immune-related gene was observed in FGBC8 cells through the quantitative real-time PCR. Our results indicate that FGBC8 cells will serve as a valuable research tool for investigating host-pathogen interactions as well as cell biotechnological applications.

• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.1
• /
• pp.102-108
• /
• 2006

On the refutation demanded for a control of various toxic substances. PCBs(poly chlorinated biphenyl) has a fatal poisonous matter in the ecosystem and the environmental pollution as it Is a kind of stable chemical substance. Especially, the gross Product of PCBs is estimated at about one million tonnage all over the world. However it is kept on storing in untreated state, then has a deterioration by the Prolonged storage and a risk of overflowing. Therefore, this research examined the fundamental characteristics of combustion and emission for the target of using the IPA (iso-propyl alcohol) solution as a part of PCBs control. IPA was filled to three kinds of Vessel, i.e. Vessel I, II, and III, and then was investigated as follows combustion shape, flame temperature. mass burning velocity, and PM(Particulate matter). A radial thermometer and a C-A thermocouple measured the flame temperature, and the optical extinction method by using He-Ne laser and the filter weight method used in the PM measurement. As a result, with an increasing of L/S ratio, the flame length become shorter and the burning velocity is more rapid, but the particulate matters is higher. It is supposed that the air flow rate is high on Vessel. and then the combustion is Promoted in the surface area of the upstream zone. The future works plan to investigate the characteristics with an using of the mixing of IPA and PCBs

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1993.05a
• /
• pp.22-22
• /
• 1993

Tungsten silicide는 낮은 전도도, 높은 녹는점, pattern 형성에 용이함등으로 VLSI device Interconnect(Bit line)로 활발하게 이용되고 있다. 일반적으로 Tungsten silicide 는 polycide(WSi$_2$/poly-Si)구조로 사용이 되며, polycide 구조는 산화분위기에서 WSi$_2$위에 SiO$_2$막을 쉽게 형성시키는 장점이 있다. As-dep상태의 polycide를 산화시킬적에는 텅스텐 실리사이드에 존재하는 excess-silicon과 microcrystalline 구조 (grain size=3$\AA$)로 인하여 텅스텐 실리사이드 표면에 균일한 SiO$_2$가 형성이 된다. 그러나 post-anneal을 실시한 샘플 Furnace anneal ($N_2$:O$_2$유량비=2:1) 처리하면 성장된 텅스텐 실사이드 입자의 입계효과에 의하여 텅스텐 실리사이드의 표면에 SiO$_2$뿐만 아니라 WO$_3$가 형성되는 이상산화가 발생되어 공정의 어려움을 야기시키고 있다. 본 실험에서는 post anneal ($700^{\circ}C$, 30min, $N_2$ 분위기) 시킨 시편을 Implantation(As 또는 phosphorous)을 실시하여 실리사이드 표면을 비정질화 시킨후 Furnace anneal 실시하여 이상산화 발생 억제에 I/I처리가 미치는 효과를 관찰하였다. XPS를 이용하여 이상산화막 두께와 WO$_3$존재를 조사하였고, AES를 사용하여 W, Si, O 원소들이 깊이에 따라 변하는 것을 관찰하였다.

• Journal of the Korean Electrochemical Society
• /
• v.3 no.2
• /
• pp.109-114
• /
• 2000

The relation between the phase-shift profile fur the intermediate frequencies and the Langmuir adsorption isotherm at the poly-Ir/0.1 M $H_2SO_4$ aqueous electrolyte interface has been studied using ac impedance measurements, i.e., the phase-shift methods. The simplified interfacial equivalent circuit consists of the serial connection of the electrolyte resistance $(R_s)$, the faradaic resistance $(R_F)$, and the equivalent circuit element $(C_P)$ of the adsorption pseudoca-pacitance $(C_\phi)$. The comparison of the change rates of the $\Delta(-\phi)/{\Delta}E\;and\;\Delta{\theta}/{\Delta}E$ are represented. The delayed phase shift $(\phi)$ depends on both the cathode potential (E) and frequency (f), and is given by $\phi=tan^{-1}[1/2{\pi}f(R_s+R_F)C_P]$. The phase-shift profile $(-\phi\;vs.\;E)$ for the intermediate frequency (ca. 1 Hz) can be used as an experimental method to determine the Langmuir adsorption isotherm $(\theta\;vs.\;E)$. The equilibrium constant (K) for H adsorption and the standard free energy $({\Delta}G_{ads})$ of H adsorption at the poly-Ir/0.1 M $H_2SO_4$ electrolyte interface are $2.0\times10^{-4}$ and 21.1kJ/mol, respectively. The H adsorption is attributed to the over-potentially deposited hydrogen (OPD H).

• Journal of the Korean Electrochemical Society
• /
• v.5 no.3
• /
• pp.117-124
• /
• 2002

Poly(acrylonitrile)(PAN) solutions in dimethylformamide(DMF) were electrospun to prepare webs consisting of 400nm ultra-fine fibers. The webs were oxidatively stabilized, activated by steam and resulted to be activated carbon fibers(ACFs). The specific surface area was $800\~1230 m^2/g$, which showed a trend of a decrease of the surface area with an increase in activation temperature, showing opposite behavior to the other ACFs. The activation energy of the stabilized fibers for the steam activation was determined as 29.2 kJ/mol to be relatively low indicating the easier activation than that of other carbonized fibers. The ACF webs were characterized by pore size and specific surface uea which would be related to the specific capacitance of the electrical double layer capacitor (EDLC). The specific capacitances measured were 27 F/g, 25 F/g, 22 F/g at the respective activation temperature of $700^{circ}C,\;750^{\circ}C\;800^{\circ}C$, showing similar trend with the specific surface area i.e., the higher activation temperature was, the lower specific capacitance resulted.

• Textile Coloration and Finishing
• /
• v.6 no.1
• /
• pp.33-43
• /
• 1994

In the present work, to clarify the mechanism of the neutral salt effect on the alkaline hydrolysis of PET, many salts with different cations like LiCl, NaCl, KCl, CsCl were added to the aqueous alkaline solutions. Then PET was hydrolyzed with aqueous solutions of many salts in alkali metal hydroxides under various conditions. Some conclusions obtained from the experimental results were summarized as follows. The reaction rate of the alkaline hydrolysis of PET was increased by the addition of neutral salts and In k was increased nearly linearly with the square root of ionic strength of reaction medium. This fact suggested that the ionic strength effect by Debye-Huckel and Bronsted theory was exerted on the reaction. The specific salt effect was also observed. The reaction rate was increased with the increase in the electrophilicity of cations of neutral salts, i. e., in the order of $Cs^+$/ < $K^+$/ $a^+$/ $i^$^+$. It was considered that the reaction rate was increased in the order of C $s^+$. < $K^+$. $a^+$. $i^+$. because the lowering effect of the cations on the negative charge of PET surface was increased with the electrophilicity of cations. It was thought that $E_{a}$ was increased because the cations of neutral salts decreased the negative charge of PET surface. It, however, was inferred from the increase in ${\Delta}$S＊ and the decrease in the ${\Delta}$G＊ that the cations of neutral salts associated with PET increased the collision frequency between carbonyl carbon and OH- ion and then accelerated the reaction rate.te.