• 폴리머
• /
• 제33권1호
• /
• pp.91-95
• /
• 2009

폴리(아미드-이미드)와 연자성체의 블렌딩에 의해 고온에서 이용 가능한 내열성 전자기 노이즈 흡수용 필름을 제조하였다. N,N-디메틸아세트아미드에 폴리(아미드 아믹 산)을 용해시킨 후 연자성체 파우더를 혼합하고 이용액을 유리 기판에 캐스팅한 뒤 열을 가하여 이미드화하는 방법으로 전자기 노이즈 흡수 필름을 제조하였다. 제조된 필름의 열적 특성, 열 안정성 및 기계적 성질을 분석하고 마이크로 스트립 라인 법에 의해 전자기 흡수력을 측정하였는데,1 GHz에서 150 ${\mu}m$두께의 복합체 필름의 전력손실(power loss)은 약 25%였다.

• Advances in nano research
• /
• 제14권2호
• /
• pp.201-210
• /
• 2023

A ZnO/poly (amide-imide) hybrid nanocomposite film with different weight percentages of Zinc oxide (ZnO) nanoparticles is synthesized and characterized in this paper. A two-step reaction successfully synthesized a new kind of heteroaromatic diamine with bulky pendant groups. In order to produce 3, 5-dinitro-3, 3-bis (4-(4-Nitrophenoxy) phenyl) -2- benzofuran-1-one, 3, 3'-bis (4-hydroxyphenyl) benzofuran-1-one and 3'-bis (4-hydroxyphenyl) benzofuran-1-one were combined with 3'-bis (3-hydroxyphenyl) benzofuran-1-one. The obtained dinitro was then reduced by zinc dust and hydrochloric acid. The reaction of 4, 4^* carbonyl diphthalic anhydride with amino acid L-alanine in acetic acid leads to the production of very high yields of chiral diacid monomer. As a result of the direct polymerization of these monomers, new optically active polymers were formed (amide-imide). In order to synthesize poly (amide-imide)/ZnO nanocomposites with different weight percentages (2, 4, 6, 8, and 10%), PAI and ZnO nanoparticles were combined using ultrasonication SEM, Fourier transform infrared spectroscopy, X-ray diffraction and thermal gravimetry were used to characterize the PAI films.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1995년도 춘계학술발표회 프로그램 및 초록
• /
• pp.21-21
• /
• 1995

• Bulletin of the Korean Chemical Society
• /
• 제24권3호
• /
• pp.357-362
• /
• 2003

The pathway producing imide ring closure during the thermal imidization of poly(amic acid) (PAA) was investigated in detail using a new analytical method, two-dimensional (2D) Raman correlation spectroscopy. The signs of the cross peaks in synchronous spectra provided evidence of the thermal imidization of PAA into PI as the heating temperature increased. The signs of the cross peaks in asynchronous spectra suggested that the imide-related modes changed prior to the amide or carboxylic mode, which indicates that cyclization occurred before the amide proton was abstracted.

• Elastomers and Composites
• /
• 제51권2호
• /
• pp.138-146
• /
• 2016

It is an inconvenience for silica nano-particles to dry again when using it in that they cohere each other through moisture in the air. Acrylamide groups were introduced to improve such inconvenience and copolymerized with silica nano-particles and then we copolymerized again with polyamic acid in order to increase thermal characteristic. Amide block copolymers were prepared using silica and (3-mercaptopropyl) trimethoxysilane (MPTMS) with a siloxane group, using 2,6-Lutidine as a catalyst. Amide block polymers and copolymers were synthesized via ATRP after brominating pyromellitic dianhydride (PMDA) and polyamic acid of methylene diphenyl diamine (MDA), using ${\alpha}$-bromo isobutyryl bromide. Characteristic peaks of copolymer with amide and imide groups and patterns of amorphous polymers were researched by FT-IR and XRD analyses and the analysis of surface characteristic groups was conducted via XPS. A change in thermal properties was examined through DSC and TGA and solubility for solvents was also researched.

• Macromolecular Research
• /
• 제9권6호
• /
• pp.327-331
• /
• 2001

A new soluble photosensitive poly(amide-co-imide) containing p-phenylenediacryloyl moiety was synthesized and its photoreactivity was characterized. The copolymer was synthesized fromp-phenylenediacryloyl chloride, 4,4-(hexafluoroisopropylidene)diphthalic anhydride and two equivalents of bis(4-aminophenyl) ether in NMP with a subsequent chemical imidization of the resulting poly[amide$\xi$ο-(amic acid)] by acetic anhydride and pyridine. The structure and thermal properties of the polymer were characterized by spectroscopic methods and thermal analyses. The polymer was stable up to 350$\^{C}$, showed good solubility in polar aprotic solvents, and became insoluble after UV irradiation due to the[2+2] cycloaddition of phenylenediacryloyl moiety. Photoreactivity of the polymer was investigated in solution or as a film with respect to the various exposure conditions by UV/Vis spectroscopy. The photosensitivity was noticeably increased with the irradiation temperature, especially in the presense of photosensitizer. The reason for the increased sensitivity was speculated based on the flexibilization of main chain at elevated temperature. Exposure characteristic curves were obtained from the gel fraction experiments after UV irradiation. The sensitivity and contrast at 160$\^{C}$ were measured to be 293 mJ/㎠ and 1.64, respectively.

• Macromolecular Research
• /
• 제17권10호
• /
• pp.739-745
• /
• 2009

N,N'-(bicyclo[2,2,2]oct-7-ene-tetracarboxylic)-bis-L-amino acids 3a-g were synthesized by the condensation reaction of bicyclo[2,2,2]oct-7-ene-2,3,5,6-tetracarboxylic dianhydride 1 with two equimolars of Lalanine 2a, L-valine 2b, L-leucine 2c, L-isoleucine 2d, L-phenyl alanine 2e, L-2-aminobutyric acid 2f and L-histidine 2g in an acetic acid solution. Seven new poly(amide-imide)s PAIs 5a-g were synthesized through the direct polycondensation reaction of seven chiral N,N'-(bicyclo[2,2,2]oct-7-ene-tetracarboxylic)-bis-L-amino acids 3a-g with bis(3-amino phenyl) phenyl phosphine oxide 4 by two different methods: direct polycondensation in a medium consisting of N-methyl-2-pyrrolidone (NMP)/triphenyl phosphite (TPP)/calcium chloride ($CaCl_2$/pyridine (py), and direct polycondensation in a tosyl chloride (TsCl)/pyridine (py)/N,N-dimethylformamide (DMF) system. The polymerization reaction produced a series of flame-retardant and thermally stable poly(amide-imide)s 5a-g with high yield. The resulted polymers were fully characterized by FTIR, $^1H$ NMR spectroscopy, elemental analyses, inherent viscosity, specific rotation and solubility tests. Data obtained by thermal analysis (TGA and DTG) revealed that the good thermal stability of these polymers. These polymers can be potentially utilized in flame retardant thermoplastic materials.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2007년도 학술발표회 논문집
• /
• pp.505-506
• /
• 2007

See Full Text

• 폴리머
• /
• 제37권4호
• /
• pp.420-430
• /
• 2013

Poly(amic acid)(PAA)와 주사슬에 이미드 고리를 갖는 poly(o-hydroxy amide)(PHA)를 용액 블렌딩하여 고분자 블렌드를 제조하였으며, FTIR, FT NMR, DSC, TGA, SEM, XRD, UTM과 LOI를 이용하여 이들의 특성들을 조사하였다. 용해도 조사에서 블렌드들은 DMF, DMAc, DMSO 등과 같은 비양자성 용매에 잘 용해되었다. 블렌드들의 최대 무게손실 온도는 $578-645^{\circ}C$ 범위이고, PHA의 함량이 증가함에 따라 증가하였다. PBO/PI 블렌드는 56-69 wt%로 비교적 높은 잔유량을 보였다. 블렌드들의 LOI 값은 24.5-28.1% 영역이며, PHA의 함량과 함께 증가하였다. 블렌드들의 초기 모듈러스와 인장강도는 PAA보다 57-121%와 67-107% 각각 증가하였다. 특히 PHA/PAA=2/8(wt/wt)의 초기 모듈러스와 인장강도는 각각 4.87 GPa와 108 MPa로 가장 높은 값을 보였다. PHA 영역들은 $0.03-0.1{\mu}m$로 비교적 균일하게 분산되어 있었으며, PAA와 PHA의 계면접착력은 좋은 것으로 확인되었다.

• Bulletin of the Korean Chemical Society
• /
• 제16권6호
• /
• pp.493-498
• /
• 1995

Ultrathin networks of itaconic acid copolymers and poly(allylamine) were produced by a Langmuir-Blodgett (LB) technique employing a double-chain amine as a monolayer template which was subsequently removed by extraction after thermal crosslinking. Itaconic acid copolymers used were copoly (itaconic acid-ethyl vinyl ether) and copoly (itaconic acid-n-butyl vinyl ether). The polyion-complexed monolayers of three components consisting of template amine, itaconic acid copolymer and poly (allylamine) were formed at the air-water interface. The Langmuir film properties have been studied by the surface pressure-area isotherm and fluorescence microscopy. The monolayers were transferred on solid substrates and were characterized by FT-IR spectroscopy, X-ray photoelectron spectroscopy, and scanning electron microscopy (SEM). Two-dimensional polymer networks were formed through imide or amide linkages by heat treatment under vacuum. The heat-treated films were extracted with chloroform after immersion in aq. sodium chloride to remove the template amines. SEM observation of a LB film on a porous fluorocarbon membrane filter with pore diameter of 0.1 μm showed covering of the pores by six layers in the polyion complex state.