• 한국환경보건학회지
• /
• 제46권2호
• /
• pp.159-169
• /
• 2020

Objectives: The purpose of this study was to investigate changes among the nine kinds of reduction chemical substances in Korea over the period of 2008-2017. We will define basic data for improving the management methods for reducing chemical substances. Methods: A survey of hazardous pollutant emissions for 2008-2017 was conducted through the pollutant Release and Transfer Register homepage. Nine kinds of designated reduction chemical substances (Benzene, Vinyl chloride, Trichloro ethylene, 1,3-butadiene, Dichloro methane, Tetrachloro ethylene, N,N-dimethylformamide, Acrylo nitrile, and Chloroform) provided the study subjects. The emission of hazardous chemicals and health effects used the National Health Statistics and Integrated Chemicals Information System (ICIS) as a reference. Results: Hazardous pollutant emissions increased by 1.2 times over the past decade, and nine types of reduction chemical substances increased by 1.6 times. By region, the emissions of reduction chemical substances over the last 10 years were in the order of Chungbuk, Gyeonggi, and Gyeongbuk. Emissions of Dichloro methane was the highest in Chungbuk and Gyeongbuk. N,N-dimethylformamide was the highest in Gyeonggi. Carcinogen pollutant emissions showed a tendency to increase continuously. In addition, group 1 carcinogen emissions showed a tendency to decrease. Conclusion: In the last decade, the amount of hazardous chemical emissions has been continuously increasing. Hazardous chemical emissions require facility improvement for continuous emissions reduction. More research on reduction of emissions is needed.

• 대한토목학회논문집
• /
• 제31권6B호
• /
• pp.507-514
• /
• 2011

본 논문에서는 하천에 유입되는 열 오염물질의 혼합거동을 분석하기 위해 2차원 수심 평균된 이송-분산방정식에 유한요소법을 적용하여 수치 모형을 개발하였다. 유한요소법의 여러 수치기법 중 SUPG법을 적용하였으며, 복잡한 하천경계를 보다 정확히 재현할 수 있도록 삼각 및 사각 요소망의 혼용이 가능하도록 하였다. 열 오염물질의 거동을 표현하기 위해서 열 교환을 묘사하는 반응항을 평형온도와 수온과의 차이에 비례하는 식으로 나타내고, 열교환 계수 및 평형온도에 따라 수온의 변화가 적용되도록 방정식을 구성하였다. 모형의 검증을 위하여 직사각형 수로에 선원으로 연속주입하여 얻은 수치해와 1차원 정상상태의 해석해를 비교하였다. 비교결과 수치해와 해석해의 결과가 서로 일치하는 것으로 밝혀졌다. 모형의 현장적용을 위해 상수원 보호구역인 팔당댐 하류부터 잠실수중보까지 22.5 km 구간을 대상영역으로 하였다. 구리하수처리장 방류수에 의한 수온 변화를 모의한 결과 수질측정망 측정자료와 비교적 비슷한 경향이 나타났다. 본 연구에서 개발한 수치모형이 열 오염원 유입으로 인한 수온 변화를 잘 표현하는 것을 알 수 있었다.

• 터널과지하공간
• /
• 제9권4호
• /
• pp.306-314
• /
• 1999

핵폐기물 저장공간과 같이 대규모 터널형 지하공간내에서의 환기량, 온/습도, 오염물질 농도 예측은 공간건설 및 운영을 위하여서 뿐만 아니라 화재등과 같은 비상시의 대처방안 강구를 위하여 반드시 필요하다. 본 연구에서는 압축성 가정하에서 autocompression의 영향을 고려한 자연환기압 계산 fan 및 regulator의 최적 위치 및 용량 결정, 암반 열물성 및 암반 표면으로부터의 증발, 응축에 의한 수분함유량 변화를 고려한 온/습도 계산, 이류확산에 기초한 오염물질 농도 분포 계산 기능을 갖춘 네트워크형 지하공간 환경예측 모델을 개발하였다. 온/습도 예측 모델을 군수물자 지하 저장공간에 적용한 결과 실측값과 상대오차는 건구온도 1.5~2.9%, 습도온도 0.6~6.1%로 나타났다. 도로터널 2개소를 대상으로한 실험결과 외부 입기만에 의한 확산계수는 9.78과 17.35$m^2$/s 큰 편이었으나 차량 운행과 환기설비의 작동시에는 이류확산만을 고려한 경우 CO 및 매연 농도의 상대오차가 5.88과 6.62%로 비교적 작게 나타났다. 이는 대부분의 터널형 지하공간에서의 농도 분포는 이류확산만에 의하여 추정이 가능함을 의미한다.

• 한국대기환경학회지
• /
• 제7권3호
• /
• pp.156-168
• /
• 1991

The purpose of this paper is to develop a stochastic model for daily sulphur dioxide $(SO_2)$ concentrations prediction in urban area (Seoul). For this, the influence of the meteorological parameters on the $SO_2$ concentrations is investigated by a statistical analysis of the 24-hr averaged $SO_2$ levels of Seoul area during 1989 $\sim$ 1990. The annual fluctuations of the regression trend, periodicity and dependence of the daily concentration are also analyzed. Based on these, a nonlinear regression transfer function model for the prediction of daily $SO_2$ concentrations is derived. A statistical procedure for using the model to predict the concentration level is also proposed.

• 한국농림기상학회:학술대회논문집
• /
• 한국농림기상학회 2003년도 춘계 학술발표논문집
• /
• pp.115-128
• /
• 2003

o What is the flux \ulcorner Flux is the transfer of a quantity per unit area per unit time. The quantities are mass, heat, moisture, momentum and pollutant in micrometeorology. Kinematic flux (Fluid). The reduction in wind speed due to frictional drag transfers momentum from the atmosphere to the surface, creating turbulence that mixes the air and transports heat and water from the surface into the lower atmosphere. (omitted)

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2013년도 제46회 KOSCO SYMPOSIUM 초록집
• /
• pp.123-126
• /
• 2013

Combustor development requires high fidelity simulation capable of predicting recirculation zone (RZ), temperature field, and pollutant emission. Swirling flow is widely used in combustor for its benefits in efficient mixing and flame stabilization by RZ. Large eddy simulation (LES) is used to calculate swirling flow in an expanding pipe [1], and shows higher accuracy than RANS. Reactive flow modeling using LES and flamelet model is validated with experiments by Barlow et al. [4] and Masri et al. [3]. Finally, heat transfer simulation of Samsung Techwin's combustor liner is presented.

• 자원리싸이클링
• /
• 제29권2호
• /
• pp.48-54
• /
• 2020

우리나라는 제조업 중심 국가로서 다양한 분야에 많은 양의 금속이 사용되나, 이들 금속이 대부분 수입에 의존하고 있다. 상당수의 금속은 전세계적으로 제한된 부존량 및 생산량에 비해 소비량이 증가하는 실정이다. 어떤 금속들은 부존 및 생산국가가 편재되어 있는 경우가 종종 있어 향후 공급의 불안정성이 우려된다. 또한 이러한 금속이 유해성을 띄고 있을 경우 환경적 측면에서도 문제가 된다. 이를 해결하기 위해 사업장 폐기물내 유해성 유가금속 회수 및 재활용을 통해 공급을 안정화시키고 환경오염을 예방할 수 있으나, 유가 금속의 종류 및 국내 배출업체와 배출폐기물 종류가 매우 많아 초기에 관련 현황파악이 번거롭다. 따라서, 본 연구에서는 공공기관 공개자료를 통해 향후 국내산업에 중요한 유해성 유가금속 선정결과를 소개하고, 국내 화학물질 배출·이동량 정보 등을 이용하여 이러한 금속(니켈, 코발트, 망간 등)를 함유 폐기물을 배출하는 업체들을 보다 용이하게 초기 현황파악 하는 방안을 순서도 형식으로 제시하였다.

• 한국대기환경학회지
• /
• 제15권6호
• /
• pp.779-789
• /
• 1999

To support daily ground-level $O_3$ forecasting in Seoul, a transfer function model(TFM) has been developed by using surface meteorological data and pollutant data(previous-day [$O_3$] and [$NO_2$]) from 1 May to 31 August in 1997. The forecast performance of the TFM was evaluated by statistical comparison with $O_3$ concentration observed during September it is shown that correlation coefficient(R), root mean squared error(RMSE), normalized mean squared error(NMSE) and mean relative error(MRE) were 0.73, 15.64, 0.006 and 0.101, respectively. The TFM appeared to have some difficulty forecasting very high $O_3$ concentrations. To compare with this model, multiple regression model(MRM) was developed for the same period. According to statistical comparison between the TFM and MRM. two models had similar predictive capability but TFM based on $O_3$ concentration higher than 60 ppb provided more accurate forecast than MRM. It was concluded that statistical model based on TFM can be useful for improving the accuracy of local $O_3$ forecast.

• 한국환경과학회지
• /
• 제24권7호
• /
• pp.947-954
• /
• 2015

Dielectric barrier discharge plasma is a new technique in water pollutant degradation, which that is characterized by the production of chemically active species such as hydroxyl radicals, ozone, hydrogen peroxide, etc. If dissolving of plasma gas generated in the plasma reaction has increased, it is possible to increase the contaminant removal capacity. In this study, the improvement on the dissolving performance of plasma gas was evaluated by the indirect method measuring the overall oxygen transfer coefficient. Experiments were conducted to examine the effects of nozzle type, distance from water surface, air supply rate and liquid circulation rate. The experimental results showed that the $K_{La}$ value of the 3-prong nozzle is 2.67 times higher than the diffuser. The order of $K_{La}$ value with nozzle type ranked in the following order: 3-prong nozzle (inner diameter, less 1 mm) > circular nozzle (inner diameter, 1.5 mm) > ellipse nozzle (short diameter 1 mm, long diameter 2.5 mm) > circular nozzle (inner diameter, 3 mm). Optimal liquid circulation rate was appeared to be 1.7 L/min, the value of $K_{La}$ was 0.510 1/min. The value of $K_{La}$ with increasing air supply rate was revealed in the form of an exponential such as $K_{La}=0.3581e^{0.2919^*air\;flow\;rate}$.

• 대한기계학회논문집B
• /
• 제21권5호
• /
• pp.691-699
• /
• 1997

The effects of concave hemispherical surface curvature on the local heat transfer from a turbulent round impinging jet were experimentally investigated. The liquid crystal transient method was used for these measurements. This method, which is a variation on the transient method, suddenly exposes a preheated wall to an impinging jet while video recording the response of liquid crystals for the measurement of the surface temperature. The Reynolds number ranges from Re=11,000 to 50,000, the nozzle-to- surface distance from L/d=2 to 10, and the surface curvature from D/d=6 to 12.The present results are also compared to those for the flat plate case. In the experiment, the local Nusselt numbers tend to increase in all regions with an increasing surface curvature. The maximum Nusselt number for all Reynolds numbers occurred at L/d .ident. 6 and a second maximum in the Nusselt number occurred at R/d .ident. 2 for both Re=23,000 and Re=50,000 in the case of L/d=2 and for Re=50,000 only in the case of L/d=4. Meanwhile, as the surface curvature increases, the value of the secondary maximum Nusselt number decreases. All the other cases exhibit monotonically decreasing values of the Nusselt number along the curved surface. The stagnation point Nusselt numbers are well correlated with Re, L/d, and D/d.