• The Korean Journal of Air & Space Law and Policy
• /
• v.24 no.1
• /
• pp.35-58
• /
• 2009

A treaty that governs the compensation on damage caused by aircraft to the third parties on surface was first adopted in Rome in 1933, but without support from the international aviation community it was replaced by another convention adopted again in Rome in 1952. Despite the increase of the compensation amount and some improvements to the old version, the Rome Convention 1952 with 49 State parties as of today is not considered universally accepted. Neither is the Montreal Protocol 1978 amending the Rome Convention 1952, with only 12 State parties excluding major aviation powers like USA, Japan, UK, and Germany. Consequently, it is mostly the local laws that apply to the compensation case of surface damage caused by the aircraft, contrary to the intention of those countries and people who involved themselves in the drafting of the early conventions on surface damage. The terrorist attacks 9/11 proved that even the strongest power in the world like the USA cannot with ease bear all the damages done to the third parties by the terrorist acts involving aircraft. Accordingly as a matter of urgency, the International Civil Aviation Organization(ICAO) picked up the matter and have it considered among member States for a few years through its Legal Committee before proposing for adoption as a new treaty in the Diplomatic Conference held in Montreal, Canada 20 April to 2 May 2009. Accordingly, two treaties based on the drafts of the Legal Committee were adopted in Montreal by consensus, one on the compensation for general risk damage caused by aircraft, the other one on compensation for damage from acts of unlawful interference involving aircraft. Both Conventions improved the old Convention/Protocol in many aspects. Deleting 'surface' in defining the damage to the third parties in the title and contents of the Conventions is the first improvement because the third party damage is not necessarily limited to surface on the soil and sea of the Earth. Thus Mid-air collision is now the new scope of application. Increasing compensation limit in big gallop is another improvement, so is the inclusion of the mental injury accompanied by bodily injury as the damage to be compensated. In fact, jurisprudence in recent years for cases of passengers in aircraft accident holds aircraft operators to be liable to such mental injuries. However, "Terror Convention" involving unlawful interference of aircraft has some unique provisions of innovation and others. While establishing the International Civil Aviation Compensation Fund to supplement, when necessary, the damages that exceed the limit to be covered by aircraft operators through insurance taking is an innovation, leaving the fate of the Convention to a State Party, implying in fact the USA, is harming its universality. Furthermore, taking into account the fact that the damage incurred by the terrorist acts, where ever it takes place targeting whichever sector or industry, are the domain of the State responsibility, imposing the burden of compensation resulting from terrorist acts in the air industry on the aircraft operators and passengers/shippers is a source of serious concern for the prospect of the Convention. This is more so when the risks of terrorist acts normally aimed at a few countries because of current international political situation are spread out to many innocent countries without quid pro quo.

• Archives of design research
• /
• v.18 no.4 s.62
• /
• pp.95-104
• /
• 2005

The purpose of this study is to estimate the determinants of product design and analyze the impacts of product design on quality competitiveness, product reliability, and consumer satisfaction in an attempt to provide a foundation for the theory of design management. For this empirical analysis, this study has derived the relevant measurement variables from a survey on 400 Korean manufacturing firms during the period of $August{\sim}October$ 2003. The empirical findings are summarized as follows: First, the determinants of product design are very significantly (at p<0.001) estimated to be the R&D capability, the level of R&D expenditure, the level of innovative activities(5S, TQM, 6Sigma, QC, etc.). This empirical result can support Pawar and Driva(1999)'s two principles by which the performance of product design and product development can be simultaneously evaluated in the context of CE(concurrent engineering) of NPD(newly product development) activities. Second, the hypothesis on the causality: product design${\rightarrow}$quality competitiveness${\rightarrow}$customer satisfaction${\rightarrow}$customer loyalty is very significantly (at p<0.001) accepted. This implies that product design positively affects consumer satisfaction, not directly but indirectly, by influencing quality competitiveness. This empirical result of this study can also support the studies of for example Flynn et al.(1994), Ahire et at.(1996), Afire and Dreyfus(2000) which conclude that design management is a significant determinant of product quality. The aforementioned empirical results are important in the following sense: the empirical result that quality competitiveness plays a bridging role between product design and consumer satisfaction can reconcile the traditional debate between QFD(quality function development) approach asserted by product developers and conjoint analysis maintained by marketers. The first empirical result is related to QFD approach whereas the second empirical result is related to conjoint analysis. At the same time, the empirical results of this study can support the rationale of design integration(DI) of Ettlie(1997), i.e., the coordination of the timing and substance of product development activities performed by the various disciplines and organizational functions of a product's life cycle. Finally, the policy implication (at the corporate level) from the empirical results is that successful design management(DM) requires not only the support of top management but also the removal of communication barriers, (i.e. the adoption of cross-functional teams) so that concurrent engineering(CE), the simultaneous development of product and process designs can assure product development speed, design quality, and market success.

• Journal of Plant Biotechnology
• /
• v.42 no.2
• /
• pp.71-76
• /
• 2015

Developed countries have set seed industry as a new growth engine, which demands strong support from the government. Multinational seed companies such as Monsanto and DuPont have made huge financial investment to secure their major roles in the global market. To spur domestic seed industry performance, Korean government laid out the foundation for developing seed industry through policy promotion in the late 2000s. In this paper, I look at the current state of the domestic and international seed market to provide information for improving the efficiency of the propulsion of the Golden Seed Project (GSP) along with its vision. The increasing size of global giant companies has been regarded to monopolize the world seed industry wherein ten renowned companies occupy 73% of the overall global market. In effect, this causes a price hike due to limited seed choices. Domestic seed market has been stuck in a range due to a sustained low agricultural production resulting in decreased seed demand and market size. Though breeding technologies for rice and vegetables are world-class, the technologies for top global crops such as cabbage, paprika, and forage are insufficient therefore professionals in this field are not easily employed. Moreover, there is a lack in appropriate infrastructure set up in the universities which adds to ineffective training of professionals. Being a key-supporting industry for agriculture, seed industry should be granted with strong and sustainable investment support from the government. In view thereof, GSP, which started in 2012, ambitions to spur researches outlined by excellent professionals in universities and seed companies aimed to drive seed export volume and quality and attain domestic seed self-sufficiency through adoption of export- and import-substitution seed types (10 varieties each) development strategies. To develop Korea's seed industry excellent achievement of GSP's goals should be drawn successfully and to do this beside development of high quality seeds, support programs for promotion of seed exports are also needed.

• The Journal of Art Theory & Practice
• /
• no.1
• /
• pp.109-144
• /
• 2003

Orientalness is a concept that expresses the collective identity of the Orient in relation to the West. The concept itself is mutable and defined by the relationship between the two regions at different points in time. Changes in the concept depend on a number of factors, such as cultural influence, the political balance of power between the two regions, and on the interpretative scheme that defines the relationship. In addition, the geographical notion of the concept evolves culturally, socially and politically. During this process, Oriental-ness becomes Oriental-ism at times. I will attempt to survey and measure the progression of Orientalness from its emergence in early 17th century to its subsequent transformation in modern Korea as reflected in art theory and art works. The recognition of the comparative characteristics of Oriental art began when the Orient was exposed to the art of the West in the late Ming dynasty during the early 17th century. The changes in the artistic climate in China affected the late Chosun. I will start with a brief introduction of this time and the birth of Orientalness. The concept gradually changed during the period of Enlightenment(開化期) towards the end of the 19th century, and during the colonial period( 1910-1945) it took on a new form. Establishment of the concept of "Orient"as a single, unifying concept spanning across cultures and national boundaries has been attributed to late Meiji period Japan, whose intention at that time is believed to have been to build a pan-Asia(亞細亞) empire with Japan at its commanding center. It has been stressed that the real motive behind the formation of one single cultural unit, where the shared common written language was Chinese and Confucianism and Taoism were the common metaphysical traditions, was to build one political unit. When the notion of a geographical unit of Asia was replaced by the concept of Asia as a cultural and political unit, a massive growth of interest and discourse were provoked around the concept of Orientalism. When Orientalism was being formulated, Korea automatically became member of "one Asia" when the country became colonized. For Koreans, the identity of the Orient had to be defined in cultural terms, as the political notion of a nation was non-existent at that time. The definition of identity was pursued at two levels, pan-Asian and local. If Orientalism was an elite discourse centered in pan-Asian philosophical and religious tradition, localized Orientalism was a popular discourse emphasizing locality as the byproduct of natural geographic condition. After the liberation in 1945 from colonial rule, a thrust of movement arose towards political nationalism. Two types of discourses on Orientalism, elite and popular, continued as central themes in art. Despite the effort to redefine the national identity by eradicating the cultural language of the colonial past, the past was enduring well into the present time. As discussed above, even when the painting themes were selected from Korean history, the tradition of using history painting as a manifestation of political policy to glorify the local identity had its founding during the Meiji period. The elevation of folk art to the level of high art also goes back to the colonial promotion of local color and local sentiment. Again, the succession of the past (colonial) ideal was defended as the tradition assumed a distinct modern shape that was abstract in style. The concept of the "Orient" is of relative and changing nature. It was formulated in relation to Western culture or civilization. Whatever the real motive of the adoption of them had been, the superiority of the Orient was emphasized at all times. The essence of the Orient was always perceived as the metaphysical tradition as a way to downgrade Western culture as materialistic. This view still prevails and the principle of Orient was always sought in Confucianism, Taoism, and Buddhism. Even when Orientalism was employed by imperialist Japan in an effort to establish her position as the center of the Orient, the spiritual source was still in Chinese philosophy and religion. In art also, the Chinese literati tradition became the major platform for elite discourse. Orientalism was also defined locally, and the so-called local color was pursued in terms of theme and style. Thus trend continued despite the effort to eradicate the remnants of colonial culture long after liberation. These efforts are now being supported politically and also institutionalized to become the aesthetic ideal of the modern Korean art.

• The Journal of Society for e-Business Studies
• /
• v.25 no.1
• /
• pp.135-176
• /
• 2020

This study is to investigate the factors affecting the usage intentions of 5G service between 5G service subscribers and non-subscribers based on the Integratively Extended Technology Acceptance Model in the initial B2C 5G service market. We designed the integratively extended technology acceptance model to find the more specific factors to affect the usage intentions by integrating the exogenous factors including the technical factors, the social factors, and the personal factors with the ETAM(Extended Technology Acceptance Model). Referring to the previous studies, we constructed the hypotheses of structural influence relationship from the exogenous factors to the dependent usage intentions factors through the mediating belief factors. We designed the 5G service usage intentions model based on these hypotheses and operational definitions of the factors. Using the analysis of SEM(Structural Equation Model), the proposed model and the hypotheses were empirically tested by the data collected from 245 subscribed respondents and 245 non-subscribed respondents. As a result, the perceived ease of use has an effect on the perceived usefulness and enjoyment, and the perceived usefulness/enjoyment and the personal innovativeness have positive effects on the usage intentions of both groups.

• Management & Information Systems Review
• /
• v.36 no.3
• /
• pp.151-165
• /
• 2017

This study investigates the effect of revenue recognition by percentage of completion method on financial analysts' earnings forecasting information in order industry. Specifically, we examines how the analysts' earnings forecast errors and biases differ according to whether or not to report the unbilled revenue account balance and the level of unbilled revenue account balance. The sample consists of 453 firm-years listed in Korea Stock Exchange during the period from 2010 to 2014 since the information on unbilled revenue accounts can be obtained after the adoption of K-IFRS. The results are as follows. First, we find that the firms with unbilled revenue account balances have lower analysts' earnings forecast accuracy than the firms who do not report unbilled revue account balances. In addition, we find that the accuracy of analysts' earnings forecasts decreases as the amount of unbilled revenue increases. Unbilled revenue account balances occur when the revenue recognition of the contractor is faster than the client. There is a possibility that managerial discretionary judgment and estimation may intervene when the contractor calculates the progress rate. The difference between the actual progress of the construction and the progress recognized by the company lowers the predictive value of financial statements. Our results suggest that the analysts' earnings forecasts may be more difficult for the firms that report unbilled revenue balances as applying the revenue recognition method based on the progress criteria. Second, we find that the firms reporting unbilled revenue account balances tend to have higher the optimistic biases in analysts' earnings forecast than the firms who do not report unbilled revenue account balances. And we find that the analysts' earnings forecast biases are increases as the amount of unbilled revenue increases. This study suggests an effort to reduce the arbitrary adjustment and estimation in the measurement of the progress as well as the introduction of the progress measurement method which can reflect the actual progress. Investors are encouraged to invest and analyze the characteristics of the order-based industry accounting standards. In addition, the results of this study empower the accounting transparency enhancement plan for order industry proposed by the policy authorities.

• Ecology and Resilient Infrastructure
• /
• v.7 no.4
• /
• pp.388-395
• /
• 2020

Exotic species have been imported for economic purposes, but more recently, an increasing number of animals are imported as pets. With the increasing popularity of two species of turtles, Mauremys sinensis and Pseudemys concinna, the number of pet turtle owners has gradually increased since 2014. The number of turtles increased by 180 in 2017 and 281 in 2019. However, these turtle species have been abandoned to nature, owing to their long lifespans and the changes in conditions of pet owners. The two turtle species have been designated as invasive alien species (AIS) in Korea considering their ecological risks, and the Biological Diversity Act prohibits their release. The owners of Mauremys sinensis and Pseudemys concinna are required to submit the "Application for Approval of Breeding and Grace for AIS" document. In this study, the breeding conditions for the two turtle species were investigated by analyzing the information in the submitted applications for six months (e.g., the suitability of breeding facilities, number of turtles, breeding period, type of pet adoption, and local district of pet owner). A total of 614 cases were analyzed. Because only 58% of breeders provided suitable breeding conditions, breeding information and responsible pet ownership training should be offered to prevent abandonment in natural ecosystems. In addition, continuous monitoring is necessary to prepare for potential problems caused by the lack of information in many applications and the one-off licensing policy.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.39 no.4
• /
• pp.38-49
• /
• 2021

The maintenance project of the Jeonglimsa temple site started with the objective of restoring the original structure of the temple, however, it was gradually transitioned to a landscaping maintenance project over time that constructs a landscape of the temple area. With paying attention to these facts, this study summarized the characteristics of cultural heritage landscaping of the Jeonglimsa temple site as follows. First, Cultural heritage landscaping is a landscaping act that creates, maintains, and manages landscapes within the spatial scope of the cultural heritage designated under the Cultural Heritage Protection Act and the cultural heritage protection area established around it. It is a work that includes protection and maintenance of the excavated remains, spaces by each function and plans for moving lines, Installation of structures to protect cultural properties, adoption of the facilities and structures for convenience of visitors, and construction of vegetation landscape. Second, the cultural heritage landscaping of the Jeonglimsa temple site has been developed in 5 periods, and these include 'the period of historical site investigation' that the temple name was identified through the designation of cultural assets and excavation investigation by the Japanese rule, 'the construction period of Baekje Tower Park' after the liberation from the Japanese rule, 'the period of Baekje Cultural Area Development Project' designated as a historical site, 'the period of the Comprehensive Development Project for a Specific Area of Baekje Culture',which was proceeded with the establishment of the park and museum instead of restoring the temple building due to the difficulty in gathering the pieces of historical evidence, and 'the period of the Jeonglimsa temple site restoring project', which was designated as a World Heritage Site while restoring the buildings deployment in the Buddhist temple at the time of foundation era of Baekje Dynasty. Third, this study verified the landscape changes of the Jeonglimsa temple site that have been transitioned, for instance, the creation of a commemorative park linked to the outer garden of Buyeo Shrine, the implementation of urban planning of the Japanese colonial era, the creation of a protective environment for the excavated historical structures and temple area, the restoration of building deployment in the Buddhist temple, and the sincerity restoration and utilization of cultural assets. Fourth, the landscape of Jeongnimsa temple site is determined by the subject and scope of cultural property designation, land use, movement lines and pavement, repairing methods of remains, structures, facilities, and vegetation. The characteristics of the cultural heritage landscape of Jeongnimsa Temple were derived, such as creating a procedural landscape considering the expansion of the cultural heritage designation scope, securing authenticity by maintaining relics in consideration of reversibility, creating a vegetative landscape suitable for historical and cultural landscapes, and enhancing the value of cultural heritage enjoyment by providing an open space.

• Journal of Digital Convergence
• /
• v.19 no.11
• /
• pp.575-583
• /
• 2021

This study aims to analyze Taekwondo trends according to news articles by year by applying topic modeling. In order to examine the Taekwondo trend through media reports, articles including news articles and Taekwondo specialized media articles were collected through Big Kinds of the Korea Press Foundation. The search period was divided into three sections: before 2000, 2001~2010, and 2011~2020. A total of 12,124 items were selected as research data. For topic analysis, pre-processing was performed, and topic analysis was performed using the LDA algorithm. In this case, python 3 was applied for all analysis. First, as a result of analyzing the topics of media articles by year, 'World' was the most common keyword before 2000. 'South and North Korea' was next common and 'Olympic' was the third commonest topic. From 2001 to 2010, 'World' was the most common topic, followed by 'Association' and 'World Taekwondo'. From 2011 to 2020, 'World', 'Demonstration', and 'Kukkiwon' was the most common topic in that order. Second, as a result of analyzing news articles before 2000 by topic modeling, topics were divided into two categories. Specifically, Topic 1 was selected as 'South-North Korea sports exchange' and Topic 2 was selected as 'Adoption of Olympic demonstration events'. Third, as a result of analyzing news articles from 2001 to 2010 by topic modeling, three topics were selected. Topic 1 was selected as 'Taekwondo Demonstration Performance and Corruption', Topic 2 was selected as 'Muju Taekwondo Park Creation', and Topic 3 was selected as 'World Taekwondo Festival'. Fourth, as a result of analyzing news articles from 2011 to 2020 by topic modeling, three topics were selected. Topic 1 was selected as 'Successful Hosting of the 2018 Pyeongchang Winter Olympics', Topic 2 was selected as 'North-South Korea Taekwondo Joint Demonstration Performance', and Topic 3 was selected as '2017 Muju World Taekwondo Championships'.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.51 no.2
• /
• pp.103-119
• /
• 2023

Since the Korean government has decided to apply the policy of BIM (Building Information Modeling) to the entire construction industry, it has experienced a positive trend in adoption and utilization. BIM can reduce workloads by building model objects into libraries that conform to standards and enable consistent quality, data integrity, and compatibility. In the domestic architecture, civil engineering, and the overseas landscape architecture sectors, many BIM library standardization studies have been conducted, and guidelines have been established based on them. Currently, basic research and attempts to introduce BIM are being made in Korean landscape architecture field, but the diffusion has been delayed due to difficulties in application. This can be addressed by enhancing the efficiency of BIM work using standardized libraries. Therefore, this study aims to provide a starting point for discussions and present a classification system for objects and attribute information that can be referred to when creating landscape libraries in practice. The standardization of landscape BIM library was explored from two directions: object classification and attribute information items. First, the Korean construction information classification system, product inventory classification system, landscape design and construction standards, and BIM object classification of the NLA (Norwegian Association of Landscape Architects) were referred to classify landscape objects. As a result, the objects were divided into 12 subcategories, including 'trees', 'shrubs', 'ground cover and others', 'outdoor installation', 'outdoor lighting facility', 'stairs and ramp', 'outdoor wall', 'outdoor structure', 'pavement', 'curb', 'irrigation', and 'drainage' under five major categories: 'landscape plant', 'landscape facility', 'landscape structure', 'landscape pavement', and 'irrigation and drainage'. Next, the attribute information for the objects was extracted and structured. To do this, the common attribute information items of the KBIMS (Korean BIM Standard) were included, and the object attribute information items that vary according to the type of objects were included by referring to the PDT (Product Data Template) of the LI (UK Landscape Institute). As a result, the common attributes included information on 'identification', 'distribution', 'classification', and 'manufacture and supply' information, while the object attributes included information on 'naming', 'specifications', 'installation or construction', 'performance', 'sustainability', and 'operations and maintenance'. The significance of this study lies in establishing the foundation for the introduction of landscape BIM through the standardization of library objects, which will enhance the efficiency of modeling tasks and improve the data consistency of BIM models across various disciplines in the construction industry.