• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.425-427
• /
• 2004

Many of the problems by using the microscope are related to the fact that the eyes of the surgeon must be continually fixed to the microscope eyepieces. In this paper, we describe a development of the stereoscopic monitoring system of the stereo microscope for reduced eyestrain or operator fatigue about the long time observations of the microscope. The system consists of the stereoscopic camera part, the stereoscopic image processor device and the polarized light stereoscopic monitor. The left and right images obtained form the two CCD cameras are the same as the eyepiece images. By use of the image processor, the polarized light stereoscopic monitor displayed a real-time stereo microscope images.

• 열처리공학회지
• /
• 제13권4호
• /
• pp.239-245
• /
• 2000

Effect of tin and iron content on the recrystallization behavior of temary Zr-0.8Sn-x%Nb alloys were studied. The specimens with 0.1, 0.2 and 0.4 wt.% of iron were prepared under various annealing temperatures from $400^{\circ}C$ to $800^{\circ}C$ and times from 30 to 5000 minutes after vacuum arc remelting. The recrystallization behavior was observed using a polarized optical microscope, TEM and micro-vickers hardness tester. The recrystallization temperature of the alloys slightly increased with iron content due to increase of activation energy. The grain growth of the alloys with 0.1 and 0.2 wt.% of iron occured rapidly, however, that of the alloys with 0.4 wt.% iron was gradually retarded due to precipitation. The hardness of the alloy with a high iron slightly increased by the precipitation of beta phase after annealing at $800^{\circ}C$.

• 대한의용생체공학회:의공학회지
• /
• 제17권3호
• /
• pp.297-304
• /
• 1996

Although collagen is still considered to be a poor immunogen, animals can produce antibodies to a number of different sites in the collagen molecule. In type I collagen, three classes of antigenic determinants have been described those are recogrlized as different degrees in different species. These are essentially composed of helical, conformation-dependent antigenic determinants and terminal, nonhelical antigenic determinants, and finally central antigenic determinants exposed only after denaturation of the collagen molecule. To utilize collagen as implantable biomateriall human e61bryonic collagen, ten immunological to body, was purified from human umbilical cords and found to contain [$\alpha$1(I)]$_2$. [$\alpha$2(I). Each step of purification were observed by polarized light microscope and analyzed through SDS-PAGE. The conclusious are follows; 1 . The purified collagen revealed gradual fiber indenties on each step of purification by polarized microscope. 2. The structual changes of extracted collagen as removed telopeptide were confirmed by SDS-PAGE.

• 대한의용생체공학회:의공학회지
• /
• 제17권4호
• /
• pp.479-490
• /
• 1996

To utilize collagen as an implantable biomateriall the mcct widely used bovine skin origin Type I collagen was investigated Pepsin treated, Type I atelocollagen was extracted and crosslinked by the ultraviolet(W) ray with wavelength of 254nm or by various concentrations of glutaraldehyde to produce collagen membranes. The crosslink rates of the specimens were observed by a polarized light microscope, a scanning electron microscope, and a Fourier transform infrared (FT-lR) spectrometer. The followings are concluded 1. The collagen membranes produced by both 2.5% glutaraldehyde solution and 254nm UV ray irra- diation demonstrated similar morphologies on polarized light microscopic and scanning electron microscopic views. 2. The chemical structures of the crosslinked membranes by glutaraldehyde over 2.5% in concentrations revealed similar intensities to that of the UV ray irradiated one in FT-lR investigation. 3. To obtain optimal croulink in bovine stalin origin Type I atelocollagen, 2.5% glutaraldehyde solution or UV ray irradiation with 254nm wavelength is acceptable.

• Current Optics and Photonics
• /
• 제2권5호
• /
• pp.474-481
• /
• 2018

We propose a polarization phase-shifting technique to investigate the thickness of $Ta_2O_5$ thin films deposited on BK7 substrates, using a modified Sagnac interferometer. Incident light is split by a polarizing beam splitter into two orthogonal linearly polarized beams traveling in opposite directions, and a quarter-wave plate is inserted into the common path to create an unbalanced phase condition. The linearly polarized light beams are transformed into two circularly polarized beams by transmission through a quarter-wave plate placed at the output of the interferometer. The proposed setup, therefore, yields rotating polarized light that can be used to extract a relative phase via the self-reference system. A thin-film sample inserted into the cyclic path modifies the output signal, in terms of the phase retardation. This technique utilizes three phase-shifted intensities to evaluate the phase retardation via simple signal processing, without manual adjustment of the output polarizer, which subsequently allows the thin film's thickness to be determined. Experimental results show that the thicknesses obtained from the proposed setup are in good agreement with those acquired by a field-emission scanning electron microscope and a spectroscopic ellipsometer. Thus, the proposed interferometric arrangement can be utilized reliably for non-contact thickness measurements of transparent thin films and characterization of optical devices.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.299-302
• /
• 2000

In this study, we have made the large holographic surface relief gratings on amorphous chalcogenide $As_{40}$$Ge_{10}$$Se_{15}$$S_{35}$ films by two beam interference using a He-Ne laser(632.8nm) light. The film thickness was about 0.6$\mu\textrm{m}$, we could magnify beam size by using beam expander. We made use $90^{\circ}$ holder which was made of reflection mirror and sample. Formed the surface relief structures were investigated using optical microscope. The diffraction efficiency was obtained by measuring +lst order intensity. In addition we investigated grating formation and diffraction efficiency as a function of polarization states which is linear or circular polarization. The results indicate that the grating was formed by linear polarized beam is better clear than that by circular polarized beam.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1995년도 봄 학술발표회 논문집
• /
• pp.164-169
• /
• 1995

Cracks in the concrete structure are known to develope by various mechani는, including an alkali-aggregate reaction. The alkali-silicate reaction between aggregates and cement is studied using polarized microscope, electron probe microanalyser and electron microscope. Metamorphosed, biaxial quartz and feldspars grains appear to have reacted readily with alkali from cement. For a given mineral, fine-grained minerals tend to react readily over the coarse-grained ones. A chemical analysis shows that the elements K, Na, Ca, and Si migrated, in most cases, fro the portion of h호 concentration to the low, Some clay minerals, including smectite and illite are newly formed as one of the reaction products. The continual expansion and shrinkage of the expandible clay minerals, probably due to repeated absorption and loss of water within the structure, plays an important role in the development of cracks within the concrete structure.

• Bulletin of the Korean Chemical Society
• /
• 제35권3호
• /
• pp.891-894
• /
• 2014

The ultrashort electron pulse, laser-emitted from the metal tip apex has been characterized and used as a probing source for a new electron microscope to visualize the morphology of the gold-mesh in the nanometric resolution. As the gap between the tungsten tip and Au-surface is approached within a few nm, the large electromagnetic field enhancement for the incident P-polarized laser pulse with respect to the tip-sample axis is strongly observed. Here, we demonstrate that the time-resolved tip-enhanced electron emission microscope (TEEM) can be implemented on the laboratory table top to give the two-dimensional image, opening lots of challenges and opportunities in the near future.

• Macromolecular Research
• /
• 제14권1호
• /
• pp.45-51
• /
• 2006

We conducted simultaneous, small-angle, X-ray scattering/differential scanning calorimetry (SAXS/DSC) and simultaneous, wide-angle, X-ray scattering (WAXS)/DSC measurements for a polymer blend of poly($\varepsilon$-caprolactone)/poly(ethylene glycol)(PCL/PEG). The time-dependent SAXS/DSC and WAXS/DSC results, measured while the system was quenched below the melting temperature of PCL from a melting state, revealed the competitive behavior between liquid-liquid phase separation and crystallization in the polymer blend. The time-dependent structural evolution extracted from the SAXS/WAXS/DSC results can be characterized by the following four stages in the PCL crystallization process: the induction (I), nucleation (II), growth (III), and late (IV) stages. The influence of the liquid-liquid phase separation on the crystallization of PCL was also observed by phase-contrast microscope and polarized microscope with 1/4$\lambda$ compensator.

• Restorative Dentistry and Endodontics
• /
• 제22권2호
• /
• pp.637-647
• /
• 1997

The purpose of this study was to evaluate the effect of concentration and pH of lactic acid on the formation of artificial root caries lesions formation in bovine teeth. The characterictics of artificially produced early root lesions were observed with polarized light microscope and the depth of lesions were mearsured with measuring microscope The results were as follows: 1. In the group of low pH and high concentration of lactic acid, the progress of lesion formation was faster than that of high pH and low concentration lactic acid group. 2. In the same group, initial lesion progress faster, but progression rate was reduced as time goes by. 3. In the development of initial root caries, cementum was act as a barrier to protect dentin from lesion progression.