• Title/Summary/Keyword: Plastic damage

Search Result 810, Processing Time 0.031 seconds

Assessment of Damages for Non-pecuniary Loss and Compensation for Damages in Medical Accidents - Overview for Cases of Medical Injury Relief in Korea Comsumer Agency - (의료사고의 손해배상과 위자료 산정 -한국소비자원 의료피해구제 사례들의 일별-)

  • Kim, Kyoung Reay;Ahn, Bup-Young
    • The Korean Society of Law and Medicine
    • /
    • v.13 no.2
    • /
    • pp.179-214
    • /
    • 2012
  • There are two opinions on the legal characteristics of damages for non-pecuniary loss, a private sanctions theory and complementary function of damages for non-pecuniary loss, briefly. There is a close connection between the legal characteristics and the function of damages for non-pecuniary loss. The functions of damages for non-pecuniary loss are consist of satisfaction, prevention( sanctions) and complementation. Several cases of medical injury relief reported to Korea Comsumer Agency are categorized as follows, 1) cases of death after having an operation, 2) diagnosed with disability after a medical accident, 3) extended damages happening related to delayed diagnosis, 4) et cetera(a plastic surgery, a treatment with oriental medicine), and the damages for non-pecuniary loss in respect to each cases are examined. In the case of occurring death or disability, Korea Comsumer Agency has set up guidelines for assessment of damages for non-pecuniary loss by classifying into major and collateral violation for a duty of care. Furthermore, the damages for non-pecuniary loss in the case of all sorts of cancers, are assessed in accordance with the degree of responsibility subsequent to dividing cancer into good and poor prognosis. When it comes to a complementary function of damages for non-pecuniary loss in the actual work, it is hard to assess the damages as it is difficult to objectify non-pecuniary loss, such as emotional distress. Though compensation for damages is major legal characteristics of consolation money, preventing a damage(private sanctions) through consolation for a victim or sanctions against an assailant also has great significance. Therefore, it is necessary to approach flexibly for mutual agreement by considering specialty( concrete facts) of individual issue thoroughly. If considering this aging society that limits the possible age for work to 60 years old, it is needed to have a complementary function of consolation money in mind not to make it less meaningful for victims due to small sum of consolation money.

  • PDF

Knocking Down Nucleolin Expression Enhances the Radiosensitivity of Non-Small Cell Lung Cancer by Influencing DNA-PKcs Activity

  • Xu, Jian-Yu;Lu, Shan;Xu, Xiang-Ying;Hu, Song-Liu;Li, Bin;Qi, Rui-Xue;Chen, Lin;Chang, Joe Y.
    • Asian Pacific Journal of Cancer Prevention
    • /
    • v.16 no.8
    • /
    • pp.3301-3306
    • /
    • 2015
  • Nucleolin (C23) is an important anti-apoptotic protein that is ubiquitously expressed in exponentially growing eukaryotic cells. In order to understand the impact of C23 in radiation therapy, we attempted to investigate the relationship of C23 expression with the radiosensitivity of human non-small cell lung cancer (NSCLC) cells. We investigated the role of C23 in activating the catalytic subunit of DNA-dependent protein kinase (DNA-PKcs), which is a critical protein for DNA double-strand breaks (DSBs) repair. As a result, we found that the expression of C23 was negatively correlated with the radiosensitivity of NSCLC cell lines. In vitro clonogenic survival assays revealed that C23 knockdown increased the radiosensitivity of a human lung adenocarcinoma cell line, potentially through the promotion of radiation-induced apoptosis and adjusting the cell cycle to a more radiosensitive stage. Immunofluorescence data revealed an increasing quantity of ${gamma}$-H2AX foci and decreasing radiation-induced DNA damage repair following knockdown of C23. To further clarify the mechanism of C23 in DNA DSBs repair, we detected the expression of DNA-PKcs and C23 proteins in NSCLC cell lines. C23 might participate in DNA DSBs repair for the reason that the expression of DNA-PKcs decreased at 30, 60, 120 and 360 minutes after irradiation in C23 knockdown cells. Especially, the activity of DNA-PKcs phosphorylation sites at the S2056 and T2609 was significantly suppressed. Therefore we concluded that C23 knockdown can inhibit DNA-PKcs phosphorylation activity at the S2056 and T2609 sites, thus reducing the radiation damage repair and increasing the radiosensitivity of NSCLC cells. Taken together, the inhibition of C23 expression was shown to increase the radiosensitivity of NSCLC cells, as implied by the relevance to the notably decreased DNA-PKcs phosphorylation activity at the S2056 and T2609 clusters. Further research on targeted C23 treatment may promote effectiveness of radiotherapy and provide new targets for NSCLC patients.

From Hiroshima to Fukushima: Nuclear and Artist Response in Japan (히로시마에서 후쿠시마까지, 핵과 미술가의 대응)

  • Choi, Tae Man
    • The Journal of Art Theory & Practice
    • /
    • no.13
    • /
    • pp.35-71
    • /
    • 2012
  • The purpose of this essay is to examine the responses of artists on nuclear experiences through an analysis of the nuclear images represented in contemporary Japanese art. Japan has previously as twice experienced nuclear disaster in 20th century. The first atomic bombs were dropped in 1945 as well as the 5th Fukuryumaru, Japanese pelagic fishing boat, exposed by hydrogen bomb test operated by the US in 1954 nearby Bikini atoll. Due to Tsunami taken place by the great earthquake that caused the meltdown of Fukushima Nuclear Power Plant in March 2010, Japan is being experienced a nuclear disaster again. Despite practical experiences, comtemporary Japanese art has avoided the subject of nuclear disasters since the end of the Asia-Pacific War for a variety of reasons. Firstly, GHQ prohibited to record or depict the terrible effect of atomic bomb until 1946. Secondly, Japanese government has tried to sweep the affair under the carpet quite a while a fact of nuclear damage to their people. Because Japan has produced numerous war record paintings during the Second World War, in the aftermath of the defeated war, most of Japanese artists thought that dealing with politics, economics, and social subject was irrelevant to art as well as style of amateur in order to erase their melancholic memory on it. In addition, silence that was intended to inhibit victims of nuclear disasters from being provoked psychologically has continued the oblivion on nuclear disasters. For these reasons, to speak on nuclear bombs has been a kind of taboo in Japan. However, shortly after the atomic bomb dropped on Hiroshima, the artist couple Iri and Toshi Maruki visited to ruin site as a volunteer for Victim Relief. They portrayed the horrible scenes of the legacy of nuclear bomb since 1950 based on their observation. Under the condition of rapid economical growth in 1960s and 1970s, Japanese subculture such as comics, TV animations, plastic model, and games produced a variety of post apocalyptic images recalling the war between the USA and Japanese militarism, and battle simulation based on nuclear energy. While having grown up watching subculture emerged as Japan Neo-Pop in 1990s, New generation appreciate atomic images such as mushroom cloud which symbolizes atomic bomb of Hiroshima. Takashi Murakami and other Neo-Pop artists appropriate mushroom cloud image in their work. Murakami curated three exhibitions including and persists in superflat and infantilism as an evidence in order to analyze contemporary Japanese society. However, his concept, which is based on atomic bomb radiation exposure experience only claimed on damage and sacrifice, does not reflect Japan as the harmer. Japan has been constructing nuclear power plants since 1954 in the same year when the 5th Fukuryumaru has exposed until the meltdown of Fukushima Nuclear Plant although took place of nuclear radiation exposures of Three Mile and Chernobyl. Due to the exploding of Fukushima Nuclear Power Plant, Japan reconsiders the danger of nuclear disaster. In conclusion, the purpose of this paper may be found that the sense of victim which flowed in contemporary art is able to inquire into the response of artist on the subject of nuclear as well as the relationship between society, politics, culture, and modern history of Japan and international political situation.

  • PDF

Control of Slug by Using Beer and Cigarette Mixture (맥주와 담배 혼합액을 이용한 민달팽이 방제)

  • Yoon, Jong-Chul;Park, Jong-Ho;Shim, Chang-Ki;Ryu, Kyung-Yul;Jee, Hyeong-Jin
    • Korean journal of applied entomology
    • /
    • v.46 no.2
    • /
    • pp.325-330
    • /
    • 2007
  • Among various food base baiting materials, beer and macerated cucumber were the most effective to induce slug that is a troublesome pest on leafy vegetables, especially on lettuce. However, the baits attracted only but did not kill the pest. When the baits were combined with various insecticidal organic materials, a few combinations such as beer and cigarette mixture successfully induced and killed the slug in the field test. The most effective combination of beer 50ml and a cigarette contained in a small plastic box killed 25 slugs per night. While macerated cucumber 50ml and a cigarette mixture killed only 4.3 slugs. The bait of beer and cigarette mixture revealed 68.4% control value against slug damage when treated for 3 consecutive days in a lettuce cultivation greenhouse. The bait also effectively reduced the slug damage in a lettuce nursery showing 58.3% control value. The method seemed highly useful for the control of slug in the organic farming system in which application of pesticides are strictly prohibited.

LPI-based Assessment of Liquefaction Potential on the West Coastal Region of Korea (액상화 가능 지수를 이용한 국내 서해안 지역의 액상화 평가)

  • Seo, Min-Woo;Sun, Chang-Guk;Oh, Myoung-Hak
    • Journal of the Earthquake Engineering Society of Korea
    • /
    • v.13 no.4
    • /
    • pp.1-13
    • /
    • 2009
  • Liquefaction is a significant threat to structures on loose saturated sandy soil deposits in the event of an earthquake, and can often cause catastrophic damage, economic loss, and loss of life. Nevertheless, the Korean peninsula has for a long time been recognized as a safe region with respect to the hazard of liquefaction, as the peninsula is located in a moderate seismicity region, and there have been no reports of liquefaction, with the exception of references in some historical documents. However, some earthquakes that have recently occurred in different parts of the world have led to liquefaction in non-plastic silty soils, a soil type that can be found in many of the western coastal areas of Korea. In this study, we first present procedures for evaluating the liquefaction potential, and calculate the liquefaction potential index (LPI) distribution at two western coastal sites using both piezocone penetration test (CPTu) data and standard penetration test (SPT) data. The LPI is computed by integrating liquefaction potential over a depth of 20m, and provides an estimate of liquefaction-related surface damage. In addition, we compared the LPI values obtained from CPTu and SPT, respectively. Our research found that the CRR values from CPTu were lower than those from the SPT, particularly in the range between 40 and 120 for the corrected tip resistance, (qc1N)CS, from the CPTu, or in the range of CRR less than 0.23, resulting in relatively high LPI values. Moreover, it was observed that the differences in the CRR between the two methods were relatively higher for soils with high fine contents.

Evaluation of Seismic Performance of Prefabricated Bridge Piers with a Circular Solid Section (중실원형단면 조립식 교각의 내진 성능 평가)

  • Kim, Hyun-Ho;Shim, Chang-Su;Chung, Chul-Hun;Kim, Cheol-Hwan
    • Journal of the Earthquake Engineering Society of Korea
    • /
    • v.11 no.3 s.55
    • /
    • pp.23-31
    • /
    • 2007
  • Fast bridge construction has been increasingly needed according to the changed construction environment. This paper deals with quasi-static tests on precast piers for bridge substructures. One of the most crucial aspect of the design of precast prestressed concrete bridge piers is the seismic performance. Seven precast pier elements were fabricated. The amount of prestressing bars, the prestressing force, and the location and number of the joint between segments were the main test parameters. Test results showed that the introduced axial prestress made the restoration of the deformation under small lateral displacement and minor damage. However, there was no effect of the prestress when the plastic hinge region was damaged severely due to large lateral displacement. Judging from the observed damage, the design of the joints in precast piers should be done for the first joint between the foundation and the pier segment. The amount of the necessary prestressing steel may be designed to satisfy the P-M diagram according to the service loads, not by having the same steel ratio as normal RC bridge piers. In order to satisfy the current required displacement ductility, it is necessary to have the same amount of the transverse reinforcements as RC piers. As the steel ratio increases, the energy absorption capacity increases. The number of joints showed a little influence on the energy absorption capacity.

Effect of loading velocity on the seismic behavior of RC joints

  • Wang, Licheng;Fan, Guoxi;Song, Yupu
    • Earthquakes and Structures
    • /
    • v.8 no.3
    • /
    • pp.665-679
    • /
    • 2015
  • The strain rate of reinforced concrete (RC) structures stimulated by earthquake action has been generally recognized as in the range from $10^{-4}/s$ to $10^{-1}/s$. Because both concrete and steel reinforcement are rate-sensitive materials, the RC beam-column joints are bound to behave differently under different strain rates. This paper describes an investigation of seismic behavior of RC beam-column joints which are subjected to large cyclic displacements on the beam ends with three loading velocities, i.e., 0.4 mm/s, 4 mm/s and 40 mm/s respectively. The levels of strain rate on the joint core region are correspondingly estimated to be $10^{-5}/s$, $10^{-4}/s$, and $10^{-2}/s$. It is aimed to better understand the effect of strain rates on seismic behavior of beam-column joints, such as the carrying capacity and failure modes as well as the energy dissipation. From the experiments, it is observed that with the increase of loading velocity or strain rate, damage in the joint core region decreases but damage in the plastic hinge regions of adjacent beams increases. The energy absorbed in the hysteresis loops under higher loading velocity is larger than that under quasi-static loading. It is also found that the yielding load of the joint is almost independent of the loading velocity, and there is a marginal increase of the ultimate carrying capacity when the loading velocity is increased for the ranges studied in this work. However, under higher loading velocity the residual carrying capacity after peak load drops more rapidly. Additionally, the axial compression ratio has little effect on the shear carrying capacity of the beam-column joints, but with the increase of loading velocity, the crack width of concrete in the joint zone becomes narrower. The shear carrying capacity of the joint at higher loading velocity is higher than that calculated with the quasi-static method proposed by the design code. When the dynamic strengths of materials, i.e., concrete and reinforcement, are directly substituted into the design model of current code, it tends to be insufficiently safe.

Enhanced Crystallinity of Piezoelectric Polymer via Flash Lamp Annealing (플래시광 열처리를 통한 압전 고분자의 결정성 향상 연구)

  • Donghun Lee;Seongmin Jeong;Hak Su Jang;Dongju Ha;Dong Yeol Hyeon;Yu Mi Woo;Changyeon Baek;Min-Ku Lee;Gyoung-Ja Lee;Jung Hwan Park;Kwi-Il Park
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.37 no.4
    • /
    • pp.427-432
    • /
    • 2024
  • The polymer crystallization process, promoting the formation of ferroelectric β-phase, is essential for developing polyvinylidene fluoride (PVDF)-based high-performance piezoelectric energy harvesters. However, traditional high-temperature annealing is unsuitable for the manufacture of flexible piezoelectric devices due to the thermal damage to plastic components that occurs during the long processing times. In this study, we investigated the feasibility of introducing a flash lamp annealing that can rapidly induce the β-phase in the PVDF layer while avoiding device damage through selective heating. The flash light-irradiated PVDF films achieved a maximum β-phase content of 76.52% under an applied voltage of 300 V and an on-time of 1.5 ms, a higher fraction than that obtained through thermal annealing. The PVDF-based piezoelectric energy harvester with the optimized irradiation condition generates a stable output voltage of 0.23 V and a current of 102 nA under repeated bendings. These results demonstrate that flash lamp annealing can be an effective process for realizing the mass production of PVDF-based flexible electronics.

Values of Winter Fallow Crops on Soil Properties and Watermelon Productivity in Plastic Greenhouse

  • Uhm, Mi-Jeong;Chon, Hyong-Gwon;Noh, Jae-Jong;Song, Young-Ju;Kwon, Sung-Whan;Sheikh, Sameena
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.45 no.2
    • /
    • pp.185-191
    • /
    • 2012
  • This study was performed to screen fallow crops during winter period for improvement of soil quality and utilizing as mulching material in watermelon cropping system during winter period. Five fallow crops, mainly, hairy vetch, barley, rye, oat and wheat, were sown in early November. They were mowed for covering the soil surface instead of polyethylene (PE) film before watermelon planting in early April the following year. The highest absorbed nutrients and dry matter yield were found in rye. Bulk density in plots with fallow crop was lower than control plot. There was observed no significant differences among the fallow crops. However, porosity was the lowest in control plot. Soil EC reduced to 12%, 13%, 14%, 16% and 22%, respectively, by cultivation of hairy vetch, oat, wheat, barley and rye. Microbial biomass carbon and dehydrogenase activities were higher in soil treated with gramineous crops, such as barley, rye and oat. The growth of watermelon was more affected by regeneration of fallow crop than the occurrence of weed, especially in plots treated with rye or oat. Also, the fruit damage by aphid was found severe in these treatment plots. The fruit yield in plots treated with hairy vetch and barley was increased 5.7% and 2.6%, respectively, compared to that of PE films. The present experiment findings implied that these fallow crops had significant beneficial effects on improvement of soil qualities and could be utilized for mulching materials in watermelon cropping system.

FEM Analysis on the PD-3 Tunnel Section (유한 요소법에 의한 터널해석(사례문제 2))

  • Kim, Gyo-Won;Eom, Gi-Yeong;Lee, Jae-Seong
    • Proceedings of the Korean Geotechical Society Conference
    • /
    • 1991.10a
    • /
    • pp.108-122
    • /
    • 1991
  • For the tunnel pattern of PD-3, a numerical analysis using the FEM program, MrSoil, was conducted with given geotechnical properties of surrounding rockmasses to verify the analysis results by comparing with other programs. The analyzed domain was extended to the far enough distance from the excavation surface to avoid the restrained effect by the boundary condition, and the construction sequence was employed in the analysis as calculation steps to simulate the time dependent 3 dimentional behavior of surrounding ground due to tunneling. Maximum 35 mm of the tunnel crown settlement and about 13 mm of the surface settlement were computed and the amount of settlement may not give any structural damage on the concrete structures on the ground surface. The shotcrete stress of 84 kg/cm2 and the rockbolt axial force of 9 ton as a maximum are within the allowable limit. The plastic zone was restricted near the excavation surface, but forepoling around the crown may be required to prevent rock falling. It is believed that the tunnel is designed reasonablely from the economical and safety points of view.

  • PDF