• 한국표면공학회지
• /
• 제32권3호
• /
• pp.253-256
• /
• 1999

Wet plating has been initiated and developed as a major surface finishing technology as of the long customized and highly productive process until now. As the external compression by virtue of the environmental preservation becomes stricter, there has been new move to adapt dry plating line instead of conventional wet plating one in domestic surface finishing industry. Dry plating, so-called, plasma surface technology has been developed in semiconducting industry and becomes a key technology to be useful as an alternative to wet plating in surface finishing industry. The historical progress of domestic surface finishing industry was outlined with the background on the adaptation of three dry plating processes-plasma spraying, plasma nitriding and ion plating. The present status of domestic industrial activity was covered on major alternative to wet plating.

• 대한족부족관절학회지
• /
• 제27권3호
• /
• pp.79-86
• /
• 2023

Numerous nonoperative treatments have been used to reduce pain and improve the clinical outcomes of patients with foot and ankle disorders. Among these treatments, hyaluronic acid and platelet-rich plasma (PRP) injections have been used increasingly. This review analyzes the recent literature reporting the efficacy and indications for hyaluronic acid and PRP injections. Hyaluronic acid and PRP can be used safely as adjuncts. Hyaluronic acid injections have shown efficacy and have a promising role as an adjuvant treatment method. In addition, its indication has expanded to various foot and ankle diseases over osteoarthritis. On the other hand, the efficacy of PRP injection has not yet been clarified, and the lack of standardization of procedures for the preparation and administration of PRP makes it difficult to establish definitive treatment indications.

• The Korean Journal of Physiology and Pharmacology
• /
• 제7권4호
• /
• pp.247-250
• /
• 2003

A simple and sensitive assay method was developed for cefepime in human plasma using high performance liquid chromatography (HPLC). Cefepime and cefadroxil (the internal standard) were extracted from heparinized human plasma by simple deproteination with perchloric acid. The extract was injected into an Atlantis dC18 column ($250{\times}4.6$ mm; particle size $5{\mu}m$, Waters) and the column was eluted with methanol and 0.01 M dihydrogen phosphate at pH 3.0 (15：85 v：v) as a mobile phase at a flow rate of 0.7 mL/min. Linearity was confirmed for the range 0.25 to $200{\mu}L/mL$ and the limit of quantitation was $0.25{\mu}L/mL$. The retention times were 10.2 min and 13.4 min for cefepime and cefadroxil, respectively. This method was successfully applied to a pharmacokinetic study of cefepime in plasma from bone marrow transplant patients.

• 한국재료학회지
• /
• 제11권11호
• /
• pp.965-971
• /
• 2001

The objective of this study is to investigate the characteristics - microstructure, hardness, adhesive strength and friction coefficient - of the coatings with aging - treatment after optimizing internal- plasma spraying parameters for Al-30wt%Si powder as a basic research to manufacture the cylinder block bore for Al engine composed of Al-30wt%Si alloy on Al alloy, The optimum internal-plasma spraying parameters of Al-30wt%Si alloy are summarized as follows: voltage: 37.5V, current: 160A, working distance: 25mm, gun traverse speed: 4.5mm/s, rotating speed: 518m/min. The primary Si particles grew aggressively with increasing heat-treating temperature. The hardness of the as-sprayed coating was about Hv=275 but this value was abruptly decreased with increasing heat-treating temperature. And average friction coefficient of the coating was below 0.08 after heat treatment for 48h at $175^{\circ}C$.

• 조명전기설비학회논문지
• /
• 제19권6호
• /
• pp.87-91
• /
• 2005

디젤 자동차 배출 가스인 NOx Soot 그리고 기타 가스들은 주요한 대기 오염의 물질들이다. 그러므로 여러 많은 나라들이 이에 관련된 규제 법규를 점점 더 엄격하게 규제하고 있는 실정이다. 본 논문에서는 디젤 자동차에서 발생되어지는 NOx, 매연 그리고 CO를 고주파 플라즈마와 EGR 시스템을 조합하여 그 제거 특성을 연구하였다. NOx는 부하와 전압이 증가하게 되면 NOx는 감소하고 매연의 경우에는 EGR율이 증가함으로 인해서 증가 하였다. 그러나 전압이 증가함에 따라서는 감소하였다.

• Journal of Welding and Joining
• /
• 제15권1호
• /
• pp.116-124
• /
• 1997

A scope of this study is to establish the optimum plasma spray conditions for fine ($5\mu\textrm{m}$) $Al_2O_3$ powder. However, the flowability of the $Al_2O_3$ powder is not so good because of irregular particle shape and fine particle size. Therefore, powder feeding system was modified by 1) change of powder feeding line material from polymer to copper 2) shorten the powder feeding tube length 3) heating the powder feeding system to $80^{\circ}C$4) vibrating the powder feeding line continuously, in order to feed the fine powder homogeneously. The homogeneous powder feeding conditions were obtained with the modified powder feeding system by controlling the powder carrier gas flow and the powder flow rate indicator. The best plasma spraying conditions for the fine $Al_2O_3$ powder were found out as 40kw gun power, 80 g/min. powder feed rate and 50 mm working distance after characterizing the microstructure, hardness and wear loss of the $Al_2O_3$ coating layer.

• 한국세라믹학회지
• /
• 제50권5호
• /
• pp.326-332
• /
• 2013

In this study, we prepared yttria stabilized zirconia granules for thermal barrier coatings using a spray drying process. First, we characterized the properties of granules such as flow rate and packing density for utilizing the air plasma spray process. The flow rate and packing density data showed 0.732 g/sec and 2.14 $g/cm^3$, respectively, when we used larger and denser particles, which are better than hollow granules or smaller spherical granules. Second, we chose larger, spherical granules fabricated in alcohol solvent as starting powders and sprayed it on the bondcoat/nimonic alloy by an atmospheric plasma spray process varying the process parameters, the feeding rate, gun speed and spray distance. Finally, we evaluated representative thermal and mechanical characteristics. The thermal expansion coefficients of the coatings were $11{\sim}12.7{\times}10^{-6}/^{\circ}C$ and the indentation stress measured was 2.5 GPa at 0.15 of indentation strain.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 E
• /
• pp.1657-1659
• /
• 1997

Electron temperature and electron density were measured in a radio-frequency inductively coupled plasma (RFICP) using a probe measurements. Measurement was conducted in an argon discharge for pressures from 10 [mTorr] to 40 [mTorr] and input rf power from 100 [W] to 800 [W], Ar flow rate from 5 [sccm] to 30 [sccm], Spatial distribution electron temperature and electron density were measured for discharge with same aspect ratio (R/L=2). Electron temperature and electron density were discovered depending on both pressure and power, Ar flow rate. Electron density was increased with increasing input power and in creasing pressure, increasing Ar flow rate. Radial distribution of the electron density was peaked in the plasma center. Normal distribution of the electron density was peaked in the center between quartz plate and substrate. From these results, We found out the generation mechanism of Radio-Frequency Inductively Coupled Plasma.

• 한국세라믹학회지
• /
• 제53권6호
• /
• pp.628-634
• /
• 2016

The 8 wt% yttria($Y_2O_3$) stabilized zirconia ($ZrO_2$), 8YSZ, a typical thermal barrier coating (TBC) for turbine systems, was fabricated under different starting powder conditions and coating parameters by atmospheric plasma spray (APS) coating process. Four different starting powders were prepared by conventional spray dry method with different additive and process parameter conditions. As a result, large- and small-size spherical-type particles and Donut-type particles were obtained. Dense structure of 8YSZ coating was produced when small size spherical-type or Donut-type particles were used. On the other hand, 8YSZ coating with a porous structure was formed from large-size spherical-type particles. Furthermore, a segmented coating structure with vertical cracks was observed after post heat treatment on the surface of dense structured coating by argon plasma flame at an appropriate gun distance and power condition.

• Journal of Information Display
• /
• 제8권3호
• /
• pp.5-10
• /
• 2007

Twin target sputtering (TTS) system with a configuration of vertically parallel facing Al targets and a substrate holder perpendicular to the Al target plane has been designed to realize a direct Al cathode sputtering on organic light emitting diodes (OLEDs). The TTS system has a linear twin target gun with ladder type magnet array for effective and uniform confinement of high density plasma. It is shown that OLEDs with Al cathode deposited by the TTS show a relatvely lower leakage current density $({\sim}1{\times}10^{-5}mA/cm^2)$ at reverse bias of -6V, compared to that ($1{\times}10^{-2}{\sim}10^{-3}$ $mA/cm^2$ at -6V) of OLEDs with Al cathodes grown by conventional DC magnetron sputtering. In addition, it was found that Al cathode films prepared by TTS were amorphous structure with nanocrystallines due to low substrate temperature. This demonstrates that there is no plasma damage caused by the bombardment of energetic particles. This indicates that the TTS system with ladder type magnet array could be useful plasma damage free deposition technique for direct Al cathode sputtering on OLEDs or flexible OLEDs.