Journal of the Korean Ceramic Society (한국세라믹학회지)

The Korean Ceramic Society (한국세라믹학회)
권호 표지
DOI QR코드

DOI QR Code

Effect of the Raw Material and Coating Process Conditions on the Densification of 8 wt% Y2O3-ZrO2 Thermal Barrier Coating by Atmospheric Plasma Spray

  • Oh, Yoon-Suk (Engineering Ceramic Center, Korea Institute of Ceramic & Engineering Technology) ;
  • Kim, Seong-Won (Engineering Ceramic Center, Korea Institute of Ceramic & Engineering Technology) ;
  • Lee, Sung-Min (Engineering Ceramic Center, Korea Institute of Ceramic & Engineering Technology) ;
  • Kim, Hyung-Tae (Engineering Ceramic Center, Korea Institute of Ceramic & Engineering Technology) ;
  • Kim, Min-Sik (R&D Center, Sewon Hardfacing Co. LTD.) ;
  • Moon, Heung-Soo (R&D Center, Sewon Hardfacing Co. LTD.)
  • Received : 2016.09.08
  • Accepted : 2016.11.04
  • Published : 2016.11.30
Download PDF
⟨ Previous Next ⟩

Abstract

The 8 wt% yttria($Y_2O_3$) stabilized zirconia ($ZrO_2$), 8YSZ, a typical thermal barrier coating (TBC) for turbine systems, was fabricated under different starting powder conditions and coating parameters by atmospheric plasma spray (APS) coating process. Four different starting powders were prepared by conventional spray dry method with different additive and process parameter conditions. As a result, large- and small-size spherical-type particles and Donut-type particles were obtained. Dense structure of 8YSZ coating was produced when small size spherical-type or Donut-type particles were used. On the other hand, 8YSZ coating with a porous structure was formed from large-size spherical-type particles. Furthermore, a segmented coating structure with vertical cracks was observed after post heat treatment on the surface of dense structured coating by argon plasma flame at an appropriate gun distance and power condition.

Keywords

References

  1. R. Mcpherson, "A Review of Microstructure and Properties of Plasma Sprayed Ceramic Coatings," Surf. Coat. Technol., 39 173-81 (1989).
  2. T. A. Taylor, D. L. Appleby, A. E. Weatherill, and J. Griffiths, "Plasma-Sprayed Yttria-Sabilized Zirconia Coatings: Structure-Prpperty Relationships," Surf. Coat. Technol., 43 470-80 (1990).
  3. S. Sampath, U. Schulz, M. O. Jarligo, and S. Kuroda, "Processing Science of Advanced Thermal-Barrier Systems," MRS Bull., 37 [10] 903-10 (2012). https://doi.org/10.1557/mrs.2012.233
  4. V. Kumar and B. Kandasubramanian, "Processing and Design Methodologies for Advanced and Novel Thermal Barrier Coatings for Engineering Applications," Particuology, 27 1-28 (2016). https://doi.org/10.1016/j.partic.2016.01.007
  5. A. Vaidya, V. Srinivasan, T. Streibl, M. Friis, W. Chi, and S. Sampath, "Process Maps for Plasma Spraying of Yttria-Stabilized Zirconia: An Integrated Approach to Design, Optimization and Reliability," Mater. Sci. Eng. A, 497 239-53 (2008). https://doi.org/10.1016/j.msea.2008.07.058
  6. A. Kulkarni, A. Vaidya, A. Goland, S. Sampath, and H. Herman, "Processing Effects on Porosity-Property Correlations in Plasma Sprayed Yttria-Stabilized Zirconia Coatings," Mater. Sci. Eng. A, 359 100-11 (2003). https://doi.org/10.1016/S0921-5093(03)00342-3
  7. N. Curry, N. Markocsan, X. H. Li, A. Tricoire, and M. Dorfman, "Next Generation Thermal Barrier Coatings for the Gas Turbine Industry," J. Therm. Spray Technol., 20 [1-2] 108-15 (2011). https://doi.org/10.1007/s11666-010-9593-x
  8. C. Kim, Y. S. Heo, T. W. Kim, and K. S. Lee, "Fabrication and Characterization of Zirconia Thermal Barrier Coatings by Spray Drying and Atmospheric Plasma Spraying," J. Korean Ceram. Soc., 50 [6] 326-32 (2013). https://doi.org/10.4191/kcers.2013.50.5.326
  9. S. I. Jung, J. H. Kim, J. H. Lee, Y. G. Jung, U. G. Paik, and K. S. Lee, "Microstructure and Mechanical Properties of Zirconia-based Thermal Barrier Coatings with Starting Powder Morphology," Surf. Coat. Technol., 204 [6] 802-6 (2009). https://doi.org/10.1016/j.surfcoat.2009.09.070
  10. P. Carpio, A. Borrell, M. D. Salvador, A. Gomez, E.Martinez, and E. Sanchez, "Microstructure and Mechanical Properties of Plasma Spraying Coatings from YSZ Feedstocks Comprising Nano- and Submicron-Sized Particles," Ceram. Int., 41 4108-17 (2015). https://doi.org/10.1016/j.ceramint.2014.11.106
  11. S. Mihm, T. Duda, H. Gruner, G. Thomas, and B. Dzur, "Method and Process Development of Advanced Atmospheric Plasma Spraying for Thermal Barrier Coatings," J. Therm. Spray Technol., 21 [3-4] 400-8 (2009).
  12. Y. Tan, V. Srinivasan, T. Nakamura, S. Sampath, P. Bertrand, and G. Bertrand, "Optimizing Compliance and Thermal Conductivity of Plasma Sprayed Thermal Barrier Coatings via Controlled Powders and Processing Strategies," J. Therm. Spray Technol., 21 [5] 950-62 (2012). https://doi.org/10.1007/s11666-012-9780-z
  13. F. Tang, L. Ajdelsztajn, G. E. Kimb, V. Provenzano, and J. M. Schoenung, "Effects of Variations in Coating Materials and Process Conditions on the Thermal Cycle Properties of NiCrAlY/YSZ Thermal Barrier Coatings," Mater. Sci. Eng. A, 425 94-106 (2006). https://doi.org/10.1016/j.msea.2006.03.043
  14. H. Guo, S. Kuroda, and H. Murakami, "Microstructures and Properties of Plasma-Sprayed Segmented Thermal Barrier Coatings," J. Am. Ceram. Soc., 89 [4] 1432-39 (2006). https://doi.org/10.1111/j.1551-2916.2005.00912.x
  15. J. Go, Y. G. Jung, S. Kim, and U. G. Paik, "Analysis of Thermoelastic Characteristics for Vertical-Cracked Thermal Barrier Coatings Through Mathematical Approaches," Surf. Coat. Technol., 206 1615-20 (2011). https://doi.org/10.1016/j.surfcoat.2011.07.083
  16. Z. Lu, M. S. Kim, S. W. Myoung, J. H. Lee, Y. G. Jung, I. S. Kim, and C. Y. Jo, "Thermal Stability and Mechanical Properties of Thick Thermal Barrier Coatings with Vertical Type Cracks," Trans. Nonferrous Met. Soc. China, 24 s29-35 (2014). https://doi.org/10.1016/S1003-6326(14)63284-2
  17. M. Karger, R. Vassen, and D. Stover, "Atmospheric Plasma Sprayed Thermal Barrier Coatings with High Segmentation Crack Densities: Spraying Process, Microstructure and Thermal Cycling Behavior," Surf. Coat. Technol., 206 16-23 (2011). https://doi.org/10.1016/j.surfcoat.2011.06.032
  18. Z. Lu, S. W. Myoung, H. S. Kim, M. S. Kim, J. H. Lee, Y. G. Jung, J. C. Jang, and U. G. Paik, "Microstructure Evolution and Interface Stability of Thermal Barrier Coatings with Vertical Type Cracks in Cyclic Thermal Exposure," J. Therm. Spray Technol., 22 [5] 671-79 (2013). https://doi.org/10.1007/s11666-013-9886-y
  19. W. J. Lee, Y. S. Oh, S. M. Lee, H. T. Kim, D. S.Lim, and S. W. Kim, "Fabrication and Characterization of 7.5 wt% $Y_2O_3-ZrO_2$ Thermal Barrier Coatings Deposited by Suspension Plasma Spray," J. Korean Ceram. Soc., 51 [6] 598-604 (2014). https://doi.org/10.4191/kcers.2014.51.6.598

Cited by

  1. Effect of waste‐derived MA spinel on sintering and stabilization behavior of partially stabilized double phase zirconia vol.18, pp.1, 2016, https://doi.org/10.1111/ijac.13628
  2. Highly‐stable, nondegradable M 2 A‐reinforced YSZ ceramic composites prepared by SPS vol.18, pp.2, 2021, https://doi.org/10.1111/ijac.13664
  3. Effect of magnesia rich spinel on densification and stabilization behavior of monoclinic zirconia vol.58, pp.3, 2016, https://doi.org/10.1007/s43207-020-00095-0
  4. MgAl2O4-reinforced c-ZrO2 ceramics prepared by spark plasma sintering vol.58, pp.5, 2016, https://doi.org/10.1007/s43207-021-00126-4