• Korean Journal of Environment and Ecology
• /
• v.10 no.1
• /
• pp.128-139
• /
• 1996

The twelve relatively intact ev ergreen broad-leaved forests in the islands off the southern coast of the Korean peninsula were surveyed. The species which commonly appeared over seventy percents in frequency among studied island biotic ecosystems including rare and endangered species and an introduxed or invaded species in the observed localities were also discussed. The common species in each areas were summarized as 28 families, 34 genus and 37 taxa. The pokildo island marked the highest species diversity as 5.511 per 100m$^{2}$ sized plots. And then the species diversity of the Mijo-ri(4.677) and the Maengson-ni(2.481) were following. The total number of rare and endangered species which appeared in the investigated areas were 24 families and 32 taxa, and 13 taxa, and the Pokildo island had the largest number as of 13 families, 12 species, 1 variety and 13 taxa. The 7 species of Compositae, 5 species of Leguminosae and 2 species of Phytolaccaceae were recorded as naturalized, invaded of introduced species. Also each one species which belonged to the Amaranthaceae, Betulaceae, Bignoniaceae, Chenopodiaceae, Commelinaceae, Cupressaceae, Labiatae, Malvaceae, Nyctaginaceae, Pinaceae, Polygonaceae and Txaceae were recorded. The Pokildo island had the largest number of plant invaders with at least 9 families and 13 genus and 13 species including Cryptomeria japonica of Taxodiaceae. It was urgently needed to work for the preperation of an island management plan to the levels of species or habitat conservation.

• Korean Journal of Construction Engineering and Management
• /
• v.19 no.4
• /
• pp.21-33
• /
• 2018

In 2018, the real estate markets have hardly been transacted according to the government's tight regulations of real estates, and have the high possibility to reach a low hit due to the hike of loan interest rates following the U. S rise of base money rate. The key profits for the large construction companies mainly come from the overseas plant projects and the domestic non-governmental construction projects. They suffered a lot such as the lowering of their credit ratings due to the large losses caused by the frquent design changes and work delay. Even in the domestic non-governmental construction projects, the general business risks are on the rise due to the property marketing moving over to the decreasing phase. The small and medium sized security companies has realized a lot of operaring profits as they participated in the PF market to make up for the losses in the securities trading business. But, now as the housing market is not so good around the nation except Seoul and the financial states of large construction companies are not good enough, they can face the liquidity crisis if there happens the problems in the PF backed securities which they have handled. As Korean economy experienced the crisis in the savings banks before, it is recommended that Financial Supervisory Service proposes the preemptive control method and supervision direction to overcome the crisis.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.29 no.2
• /
• pp.92-108
• /
• 2017

Present work shows a numerical method to analysis of interaction analysis between solitary wave and onshore bridge. Numerical simulation is carried out by TWOPM-3D (three-dimensional one-field model for immiscible two-phase flows), which is based on Navier-Stokes solver. To do this, the solitary wave is generated numerically in numerical wave channel, and numerical results and experimental results were compared and analyzed in order to verify the applicability of force acting on an onshore bridge. From this, we discussed precisely the characteristics of horizontal and vertical forces (uplift and downward forces) changes including water level and velocity changes due to the variation of solitary wave height, water depth, onshore bridge's location and type, and number of girder. Furthermore, It is revealed that the maximum horizontal and vertical forces acting on the girder bridge show different varying properties according to the number of girder, although each maximum force acting on the girder bridge is proportional to the increasement of incident solitary wave height, and the entrained air in the fluid flow affects the vertical force highly.

• The KIPS Transactions:PartA
• /
• v.13A no.4 s.101
• /
• pp.371-380
• /
• 2006

This paper utilizing model picture of finished clothes in fashion design field various material (textile fabrics) doing Draping directly can invent new design, and do not produce direction sample or poetic theme width and confirm clothes work to simulation. Also, construct database about model and material image and embodied system that can confirm Mapping result by real time. And propose clothes simulation system to dress to 3D human body model of imagination because using several cloth pieces first by process to do so that can do simulation dressing abstracted poetic theme width to 3D model here. Proposed system creates 3D model who put clothes by physical simulation that do fetters to mass-spring model after read 3D human body model file and 2D foundation pattern file. System of this treatise examines collision between triangle that compose human body model for realistic simulation and triangle that compose clothes and achieved reaction processing. Because number of triangle to compose human body is very much, this collision examination and reaction processing need much times. To solve this problem, treatise that see could create realistic picture by method to diminish collision public prosecutor and reaction processing number, and could dress clothes to imagination human body model within water plant taking advantage of Octree space sharing techniques.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.27 no.1
• /
• pp.38-45
• /
• 2017

Objectives: Radon may be second only to smoking as a cause of lung cancer. Radon is a colorless, tasteless radioactive gas that is formed via the radioactive decay of radium. Therefore, radon levels can build up based on the amount of radium contained in construction materials such as phospho-gypsum board or when ventilation rates are low. This study provides our findings from evaluation of radon gas at facilities and offices in an industrial complex. Methods: We evaluated the office rooms and processes of 12 manufacturing factories from May 14, 2014 to September 23, 2014. Short-term data were measured by using real-time monitoring detectors(Model 1030, Sun Nuclear Co., USA) indoors in the office buildings. The radon measurements were recorded at 30-minute intervals over approximately 48 hours. The limit of detection of this instrument is $3.7Bq/m^3$. Also, long-term data were measured by using ${\alpha}-track$ radon detectors(${\alpha}-track$, Rn-tech Co., Korea) in the office and factory buildings. Our detectors were exposed for over 90 days, resulting in a minimum detectable concentration of $7.4Bq/m^3$. Detectors were placed 150-220 cm above the floor. Results: Radon concentrations averaged $20.6{\pm}17.0Bq/m^3$($3.7-115.8Bq/m^3$) in the overall area. The monthly mean concentration of radon by building materials were in the order of gypsum>concrete>cement. Radon concentrations were measured using ${\alpha}-track$ in parallel with direct-reading radon detectors and the two metric methods for radon monitoring were compared. A t-test for the two sampling methods showed that there is no difference between the average radon concentrations(p<0.05). Most of the office buildings did not have central air-conditioning, but several rooms had window- or ceiling-mounted units. Employees could also open windows. The first, second and third floors were used mainly for office work. Conclusions: Radon levels measured during this assessment in the office rooms of buildings and processes in factories were well below the ICRP reference level of $1,000Bq/m^3$ for workplaces and also below the lower USEPA residential guideline of $148Bq/m^3$. The range of indoor annual effective dose due to radon exposure for workers working in the office and factory buildings was 0.01 to 1.45 mSv/yr. Construction materials such as phospho-gypsum board, concrete and cement were the main emission sources for workers' exposure.

• Applied Chemistry for Engineering
• /
• v.16 no.6
• /
• pp.809-814
• /
• 2005

In this work, the thermal properties of epoxy coating system on the liner plate in the containment structure of nuclear power plants had been examined by irradiation and design basis accident (DBA) conditions. The effect of immersion in hot water on adhesion strength of the coating system had been also studied. The glass transition temperature ($T_g$) and thermal stability of ET-5290/carbon steel A 32 epoxy coating systems were measured by DSC and TGA analyses, respectively. Contact angle measurements were used to determine the effect of immersion on the surface energetics of epoxy coating system, with a viewpoint of surface free energy. Adhesion tests were also executed to evaluate the adhesion strength at interfaces between carbon steel plate and epoxy resins. As a result, it was found that the irradiation led to an improvement of internal crosslinked structure in cured epoxy systems, resulting in significantly increasing the thermal stability, as well as the $T_g$. Also, the immersion in hot water made a role in the post-curing of epoxy resins and increased the mechanical interlocking of the network system, resulting in increasing the adhesion strength of the epoxy coating system.

• FLOWER RESEARCH JOURNAL
• /
• v.16 no.2
• /
• pp.134-142
• /
• 2008

This work aims to obtain basic information for seed propagation of Hydrangea serrata for. acuminata. The germination percentage of the seeds taken on 15 November, 30 December, and 23 January was $90.0{\pm}4.16%$, $84.4{\pm}5.52%$, and $88.9{\pm}2.40%$, respectively. This suggest that seeds of Hydrangea serrata for. acuminata are non-dormant seeds. The optimum temperature for germination was $25^{\circ}C$ and light was necessary. Most of the growth parameters (shoot and leaf length, stem diameter, root length, no. of roots, T/R ratio, and fresh and dry wts.) were significantly greater at $25/20^{\circ}C$ and $25^{\circ}C$ than at the other temperatures. Low T/R ratio at relatively cool temperatures (15 and $20^{\circ}C$) was caused by suppressed top growth. In light quality treatment, red light (RL) significantly enhanced stem elongation. The greatest photosynthetic pigments (total chl, chl a/b, and carotenoid) were observed in seedlings grown in blue light (BL), followed by seedlings grown in RL+BL. When blue light was added, higher pigment contents were found. Effect of plug cell size (50, 72, 128, 162 and 200 cells) on the growth of seedlings was investigated. The highest top growth was observed in seedlings grown in 50 cell trays, followed by seedlings grown in 72, 128, 162, and 200 cell trays. However, there was no significant differences between 162 and 200 cell trays. Especially, smaller size leaves were observed in seedlings grown in smaller cell trays (lower volume and high plant density).

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.4
• /
• pp.373-378
• /
• 2019

In the marine area, the salt concentration in the soil increases, and the inland heavy metal pollution increases the damage of plants. In the inland industrial development area, researches on the genetic resources of plants together with the heavy metal accumulation of Co, Ni, Zn, and so on are required. Both of these problems have caused scientists to work hard to find plants that are likely to cause stress in plant roots. In this study, seeds of Arabis stelleri var. japonica collected near the shore were used for germination. The growth and development and tolerance of both Arabis and Arabidopsis seeds were investigated under laboratory culture conditions. As a result, Arabis showed resistance about 3 times in 250 mM nickle and cobalt, and more than 4 times in 1 mM zinc when compared to Arabidopsis. The tolerance of Arabis to Na salts increased by 20% or more at 50 mM concentration and Arabis was resistant to heavy metals and salt concentration. The accumulation of Na ions in the body was measured as a preparation for studying the intracellular mechanism. As a result, it showed a further decrease in resistance to ground water roots. It is considered that the activity of the exporting gene is important rather than the mechanism of accumulation.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.31 no.1 s.49
• /
• pp.73-78
• /
• 2005

This work was carried out to investigate the antioxidative effects of Acanthopnax sessiliflorus from Jeongseon County for the purpose of development of a novel antioxidant from natural products. The antioxidant activity was determined by using electron paramagnetic resonance (EPR), not measuring the radical scavenging effect on 1,1-diphenyl-2-picrylhydrazyl (DPPH) which have bun used for antioxidant activity of natural sources. Although DPPH radical scavenging activity assay have been generally used for antioxidant activity, this assay is nut appropriated for determinating which radical is scavenged by extracts from natural products. Using EPR, we determinated whether A. sessiliflorus extracts from Jeongseon County scavenge specific radicals or not. On experiment of scavenging superoxide anion radical, hydroxyl radical, nitrogen dioxide and peroxinitrite. Extracts from A. sessiliflorus showed high antioxidant activities to reactive oxygen and nitrogen species. These result suggest that extracts from A. sessiliflorus act as an antioxidant by scavenging reactive oxygen and nitrogen species and used as new cosmetic ingredients for anti-oxidative stress in skin.

• Toxicological Research
• /
• v.35 no.1
• /
• pp.45-63
• /
• 2019

In view of the growing industrial use of Bacterial cellulose (BC), and taking into account that it might become airborne and be inhaled after industrial processing, assessing its potential pulmonary toxic effects assumes high relevance. In this work, the murine model was used to assess the effects of exposure to respirable BC nanofibrils (nBC), obtained by disintegration of BC produced by Komagataeibacter hansenii. Murine bone marrow-derived macrophages ($BMM{\Phi}$) were treated with different doses of nBC (0.02 and 0.2 mg/mL, respectively 1 and $10{\mu}g$ of fibrils) in absence or presence of 0.2% Carboxymethyl Cellulose (nBCMC). Furthermore, mice were instilled intratracheally with nBC or nBCMC at different concentrations and at different time-points and analyzed up to 6 months after treatments. Microcrystaline $Avicel-plus^{(R)}$ CM 2159, a plant-derived cellulose, was used for comparison. Markers of cellular damage (lactate dehydrogenase release and total protein) and oxidative stress (hydrogen peroxidase, reduced glutathione, lipid peroxidation and glutathione peroxidase activity) as well presence of inflammatory cells were evaluated in brochoalveolar lavage (BAL) fluids. Histological analysis of lungs, heart and liver tissues was also performed. BAL analysis showed that exposure to nBCMC or CMC did not induce major alterations in the assessed markers of cell damage, oxidative stress or inflammatory cell numbers in BAL fluid over time, even following cumulative treatments. $Avicel-plus^{(R)}$ CM 2159 significantly increased LDH release, detected 3 months after 4 weekly administrations. However, histological results revealed a chronic inflammatory response and tissue alterations, being hypertrophy of pulmonary arteries (observed 3 months after nBCMC treatment) of particular concern. These histological alterations remained after 6 months in animals treated with nBC, possibly due to foreign body reaction and the organism's inability to remove the fibers. Overall, despite being a safe and biocompatible biomaterial, BC-derived nanofibrils inhalation may lead to lung pathology and pose significant health risks.