• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1605-1606
• /
• 2007

An electrical generator in power plant is driven and maintained its speed at rated by steam turbine. By the way, after synchronization in parallel with the power system, as the steam flow into turbine can not be reduced fast even though the electrical load is lost, the turbine gets into dangerous situation due to the increase of its speed. At this time, the duty of the turbine governor is to limit the speed to its overspeed trip set point by stopping the steam flow as soon as possible, the test of which is called load rejection test. It is introduced in this paper for a field simulation test of generator load rejection to be implemented on the turbine governor in a 680MW nuclear power plant before its startup.

• 한국해양공학회지
• /
• 제30권6호
• /
• pp.526-534
• /
• 2016

This study had the goal of designing onboard structures for a pre-pilot mining test (PPMT), which is required for the commercialization of the deep-sea mining industry. This PPMT is planned to validate the performance of a hydraulic lifting system and verify the concept of operating through a moon-pool in the east sea, Korea. All of the onboard equipment and facility were designed by KRISO. Because the test was performed at the first development, it is difficult to determine what risk will occur in the facility. Therefore, risk-based design is required in the facility for the PPMT, which includes the facility layout, failure mode and effect analysis (FMEA), and risk reduction plan. All of the expected performances of the lifting system itself and the onboard facilities were qualitatively validated using the risk-based design.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.1149-1149
• /
• 2006

The leakage characteristic is an important factor in power plant. However, most of power plant have efficiency problem which is occurred leaking between high pressure steam turbine axle and stator. The labyrinth seal which is used between the main turbine axle and stator in the power plant. Because it is able to be non-contact seal and it is minimize clearance to decrease the leakage. But its actual system is too huge to experiment. Therefore, most steam turbine seal performance tests were conducted by air similarity test. This paper described a test facility and program for air similarity test of high pressure steam turbine seal. A test facility has been designed and built to evaluate leakage verification of labyrinth seal. The test facility consist of air compressor, anti-swirl labyrinth seal for 1/3 air similarity model, pressure transducer, air flow measure system, instrumentation and auxiliary system. For evaluation of steam turbine seal performance, the air similarity test of labyrinth seal leakage verification was conducted and we compared experiment data and analysis result.

• 한국자원식물학회지
• /
• 제4권1호
• /
• pp.17-22
• /
• 1991

Codonopsis lanceolata and C.pilosula medicinal plants were subjected to preliminary antitumor screening test with Sarcoma 180 ascites and screning on V-79 cell. This ex-periments Iwere conducted in accordance with the Total packed cell Volume methodand Cytotoxicity method .

• 대한기계학회논문집A
• /
• 제38권6호
• /
• pp.601-608
• /
• 2014

해양플랜트는 고립된 한경 특성상 화재에 취약하다. 특히 해양플랜트의 주요 기자재인 소화용 감압 밸브가 피해를 입었을 때 해양플랜트의 피해는 증가한다. 본 논문에서는 해양플랜트에 사용되는 소화용 감압밸브에 대한 화재 안전시험을 수행하고 그 결과를 수치해석 결과와 비교, 분석하여 해석의 타당성을 증명하고 화재 안전시험에 대한 해석 기법을 제시하였다. 화재 안전시험의 화염을 구현하기 위해 FSI를 이용하였으며 화재 안전시험의 온도 분포와 해석 결과 온도분포의 비교를 통해 해석 기법의 신뢰성을 확인하였다. 또한, 화재 안전시험에서 나타난 문제점을 구조해석을 통해 검증하였으며 그 결과 시트의 변형이 문제점으로 나타났다.

• 한국작물학회지
• /
• 제56권2호
• /
• pp.151-158
• /
• 2011

1. 수수 성숙기에 간장 길이를 조사한 결과 6개체(12.2%) 가 300 cm 이상의 길이로 바이오매스가 우량한 것으로 파악되었으며, 10개체(20.4%)정도는 200~300 cm 사이의 평균 길이를 나타내었다. 2. 성숙기의 수수 줄기 직경에는 큰 차이를 보여준 개체는 없었으며, 대부분의 수수 수집종들은 $2.2{\pm}0.1$ cm 정도의 직경을 갖는 것으로 드러났다. 3. 본 연구에 시험한 수수 수집종들은 엽장이 60~70 cm 정도의 길이에 속하는 유전자원이 22 개체가 되는 것으로 나타났으며, 7개체는 70 cm 이상되는 것으로 나타났다. 4. 엽형은 49% 정도의 개체가 협단으로 분류되었고, 대부분의 엽맥색은 백색으로 나타났다. 5. 본 연구에 사용된 대부분의 수수의 수형은 반밀수 타원형이 많은 것으로 나타났으며, 수장은 평균적으로 20~30 cm에 달하는 것으로 나타났다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.193-198
• /
• 2000

The small punch test have been developed to evaluate the material strength of the power plant components. This small punch test specimen is very small than the conventional strength test specimens. Korea Electric Power Research Institute (KEPRI) have been applying this test to assess accurately the life of thermal power plant and enhancing the reliability. The small punch test for gas turbine blades is under development. It's possible to compare the relative strength among the same materials having different operation histories. In this paper, the strength reductions of gas turbine materials are investigated by the small punch tests. All materials shows the almost same strength and deformation with the allowable deviation. At the same test temperature, the damaged material has the maximum load value. The strength reduction is not shown in this small punch test results.

• Mycobiology
• /
• 제33권4호
• /
• pp.206-209
• /
• 2005

Narceine methyl ester and narceine are potent alkaloids which were isolated from Corydalis longipes were found effective in vitro at very low concentration, i.e., $100{\sim}500\;ppm$ against spore germination of some test plant pathogenic fungi (Alternaria solani, A. tagetica, Cercospora abelmoschi, Curvularia maculans, Erysiphe cichoracearum, E. pisi, Fusarium udum, Helminthosporium oryzae, H. penniseti, Ustilago cynodontis). Among the test, phytopathogens the spores of F. udum, C. maculans and H. penniseti were highly sensitive at 200 ppm. However, spores of E. pisi, A. solani and A. tagetica were less sensitive at low concentration followed by other test fungi. Most of the fungi showed zero or nearly zero percent spore germination at 400 and 500 ppm.

• 한국구조물진단유지관리공학회 논문집
• /
• 제6권1호
• /
• pp.149-158
• /
• 2002

The carbonation process is affected by both the concrete material properties such as W/C ratio, types of cement and aggregates, admixture characteristics and the environmental factors such as $CO_2$ concentration, temperature, humidity. Based on results of preliminary study on carbonation, this study is to develop a carbonation prediction model by taking account of $CO_2$ concentration, temperature, humidity ad W/C ratio among major factor affecting the carbonation process. And to constitute a model formula which correspond to the mix design of the nuclear power plant, test coefficient that correspond to the design of the nuclear power plant is obtained based on the results of accelerated carbonation test. Also a field coefficient which is obtained based on results of the field examination is included to improve the conformity of the actual structures of nuclear power plant.

• Nuclear Engineering and Technology
• /
• 제36권5호
• /
• pp.475-484
• /
• 2004

Extending the lifetime of a nuclear power plant [(hereafter referred to simply as NPP)] is one of the most important concerns in the global nuclear industry. Cables are one of the long-life items that have not been considered for replacement during the design life of a NPP. To extend the cable life beyond the design life, it is first necessary to prove that the design life is too conservative compared with actual aging. Condition monitoring is useful means of evaluating the aging condition of cable. In order to simulate natural aging in a nuclear power plant. a study on accelerated aging must first be conducted. In this paper, evaluations of mechanical aging degradation for a neoprene cable jacket were performed after accelerated aging under tcontinuous and intermittent heating conditions. Contrary to general expectations, intermittent heating to the neoprene cable jacket showed low aging degradation, 50% break-elongation, and 60% indenter modulus, compared with continuous heating. With a plant maintenance period of 1 month after every 12 or 18 months operation, we can easily deduce that the life time of the cable jacket of neoprene can be extended much longer than extimated through the general EQ test. which adopts continuous accelerated aging for determining cable life. Therefore, a systematic approach that considers the actual environment conditions of the nuclear power plant is required for determining cable life.