• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.26 no.4
• /
• pp.985-994
• /
• 2016

Since the inauguration of Defense Acquisition Program Administration(DAPA) in 2006, the national defense core technology research & development business has not only pertained to the weapons systems development but also to the improvement of the national science & technology capability via the acquisition of cutting-edge technologies. Furthermore, it has been closely related to the promotion of the defense industry and the mutual improvements of defense and civil technologies. The cyber warfare weapon system, a newly added national defense weapon system field since 2015, has become a promising weapon system branch for improving the national defense power as well as the national defense industry as shown in the case of Israel. By utilizing the existing result of the national defense core technology level, in order to establish the direction of technology planning of the cyber warfare weapon system, this paper analyzes the technology level and features of the cyber warfare weapon system in various aspects via comparisons with other weapons systems. The result of these analyses shows that the cyber warfare weapon system possesses a relatively high technology level due to the technology accumulation in the civilian sector while the relatively slow inclusion to the national weapons systems and the lack of the correspondence case regarding aggressive cyber responses in the defense sector yields a relatively low national rank. However, the technological gap between South Korea and the most advanced country in the field of cyber warfare technology is analyzed to be among the lowest, which indicates that with efficient and effective pursuits in terms of pthe weapons systems acquisitions as well as the core technologies research & development business, an outstanding cyber warfare capacity can be obtained in a short time.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.8 no.2
• /
• pp.21-30
• /
• 2005

The primary purpose of this paper is to prove a clear relationship among land use type, vegetation level and surface temperature. For this purpose, this paper presents series of spatial distribution maps of the three features obtained through the visual interpretation of digital images. The result of study tells us that the spatial distribution of the vegetation level is very similar with that of surface temperature. By analyzing the relationship between surface temperature and land use types, this study categorizes the eighteen urban land uses into 7-8 groups according to their average surface temperature. The Duncan test was conducted to categorize the land uses. The surface temperature of manufacturing related land use is the highest, semi-residential use is the next, non-residential land use is the next to the lowest, and the agricultural and forest land use is the lowest. This paper provides another strong evidence of the relationship by showing the regression result.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.123-130
• /
• 2002

Project plan and control is a highly skilled task which is vital for business success, and Project control systems are important for successful project execution. To support construction process management effectively, an integrated cost and schedule control function is required to collect quality data in a timely manner and to provide quality historical data for future planning of new projects. In Korea construction industry, the development and implementation cases of a project control system which to efficiently support construction project planning and controlling processes, have been increased to ensure a project success and the profitability of a construction company. To contribute to improving practical effectiveness of a project control system, the paper reviewed and analyzed the current trends and functional features of current project control systems. And it also described the pending issues and their solutions faced on previous project control systems.

• Korean Journal of Construction Engineering and Management
• /
• v.5 no.1 s.17
• /
• pp.168-174
• /
• 2004

Project plan and control is a highly skilled task which is vital for business success, and Project control systems are important for successful project execution. To support construction process management effectively, an integrated cost and schedule control function is required to collect quality data in a timely manner and to provide quality historical data for future planning of new projects. In Korea construction industry, the development and implementation cases of a project control system which to efficiently support construction project planning and controlling processes, have been increased to ensure a project success and the profitability of a construction company. To contribute to improving practical effectiveness of a project control system, the paper reviewed and analyzed the current trends and functional features of current project control systems. And it also described the pending issues and their solutions faced on previous project control systems.

• Journal of Intelligence and Information Systems
• /
• v.7 no.1
• /
• pp.1-15
• /
• 2001

Recently, Internet based Electronic Commerce is recognized as one of the alternatives for strengthening sales power of small and medium companies. However, small and medium manufacturers can't adjust properly to the new environment because they are in short of money, personnel, and technology. To cope with this problem, this paper deals with the development of virtual manufacturing agent to support sales agent. The sales activity of most of parts manufacturing companies is based on orders of buyers. The process of promotion, receipt and selection of orders of the parts manufacturing is closely coupled with the load status of the production lines. On deciding whether to accept an order or not, as well as negotiating with buyers, sales person needs information such as load and schedule of production lines, manufacturability of the order. Therefore, the functions of virtual manufacturing agents manufacturability analysis, process planning, and scheduling are key features in developing an agent of sales activity for the parts manufacturing business. While most of research on virtual manufacturing system so far is focused on the simulation of each product, this paper deals with the development of agent assisting internet-based product sales by supporting production information promptly. The pilot system of virtual manufacturing agent is implemented using KQML-based agent template and Java-based expert system shell for a small molding company.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.35 no.1 s.120
• /
• pp.69-78
• /
• 2007

The purpose of this study is to determine the basis for the names of mountain passes that have been different since antiquity, especially names such as those written in Chinese characters. For this purpose, this researcher focused on 108 mountain passes listed in the section of Gyeongsangdo that is a part of Joseon's representative human geographic literature, 'Sinjong Dongguk Yeoji Seungram'. Then the author found out their location by reviewing 'Joseon Hugi Jibang Jido', 'Daedong Yeojido' and 'Hanguk Jimyeong Chongram'. Out of the 180 passes, 30 were finally selected to be analyzed. Again 15 among 30 were found named as 'Hyeon', 7 as 'Ryeong' and remainder were called either term on occasion. The study tried to find out standards according to whether the 30 passes were named as 'Hyeon' or 'Ryeong'. To carry out the study, the author made 3 hypotheses. First, the passes' altitudes were examined. Then visual characteristics were investigated when seen from the summit of the passes. Finally, the number of the passes' turns was investigated to know whether this discriminates between 'Hyeon' and 'Ryeong'. The results of the study can be summarized as follows. With the altitudes and the visual characteristics as mentioned above, it was not possible to determine features that clearly discriminate 'Hyeon' from 'Ryeong'. However, the number of the turns was significantly different in accordance with the names of the passes, 'Hyeon', 'Ryeong' and 'Hyeon or Ryeong'. It seems that 'Hyeon' and 'Ryeong' were discriminatively used depending on how mountain passes were apparently perceived with the number of their turns.

• Journal of Korean Society of Rural Planning
• /
• v.22 no.3
• /
• pp.21-31
• /
• 2016

This is a comparative study focused on the scenic landscape preferences derived from visitors's perceptions at the Dulle-gil and the uphill trail in Bukhansan National Park. Unlike previous landscape assessment methods, this study contains more direct and on-site analysis with methods of understanding the visitors' perceptions by using 'visitor employed photography(VEP)' which requires each visitor to take preferable scenic landscape with one's own smart phone camera. The scenic landscape types at two different trails were categorized and then the types favoring most of participants were verified. There are total number of 16 visual landscape types preferred by participants at both the Dulle-gil and the uphill trail in Bukhansan National Park. As in terms of consensus photography(CP) on the Dulle-gil was found to have more diverse elements including both natural and artificial elements compare to the uphill trail. Furthermore, the perceptually excited node(PEN) at the Dulle-gill were found to be more scattered evenly whereas PEN at the uphill trail were concentrated on the entrance and the top of the mountain. It is necessary to consider that the scenic landscape management at the Dulle-gil and the uphill trail require different approaches. Facilities were set based on careful consideration of distinctive geographical features and vegetation in the Dulle-gil. And the management need to be focus on the 'forested area' maintaining natural state in the uphill trail. Futhermore, the result of the CP and PEN in the trails would be helpful to proceed the next step of landscape perception study depending on characteristics of groups.

• Journal of Korean Society of Rural Planning
• /
• v.20 no.1
• /
• pp.77-89
• /
• 2014

This study intends to establish a system to investigate and analyze various impacting factors to Rural Housings such as the relationship of characteristics of Rural Housings located in a Rural Village to the Village and a Unit Housing, to the External and Internal Spaces inside the Unit Housing and the Village, and to Living Characteristics of the Residents and Space from an integrated point of view. The results of this study are largely summarized as following four kinds. Rural Housing Survey System can be largely classified into three stages, and they are a Preliminary Survey, Basic Survey and In-depth Survey. Along with these, the scope of the survey contents can be divided into a survey result by a unit of village, of land, of housing, and of resident's opinion survey. Secondly, the surveys by village unit are on location properties, Village Identity, Street Network, Land Use, Landscape Features and Public Facilities, and consist of Literature, Discussion and Field Survey. Thirdly, the land Unit Surveys are on a Driveway, Gate Location, Housing Placement, Outer Space Design in a Yard and Outer Space Use Characteristics, and consist of Questionnaire and Field Surveys. For the fourth, the Housing Unit Surveys are on an Internal Space Design and Placement, and consist of Questionnaire and Field Surveys. Finally, the Resident Questionnaire Survey consisted of Entire Discussion Survey and a Household one, and then the Entire Survey was on the Village's History, Village's Characteristics, Cultivation Characteristics and Community Activities while an individual one was on Main Living Characteristics, Satisfaction and Utilization Characteristics.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.30 no.6
• /
• pp.128-140
• /
• 2003

The purpose of this research was to present characteristics for the classification of biotopes and classification method of biotopes as basic data for ecological landscape planning in Metropolitan Daegu. The results of this study were as follows. 1) The study identified fifteen characteristics for classification of biotopes. Ecological landscape characteristics were divided into structural and functional factors. There are six structural factors such an inclination, and nine functional factors such as temperature. 2) The study area was separated into sixty eight biotope types. For example, an industrial district was divided into two biotope types: a biotope type of an industrial district with abundant green space, and a biotope type of an industrial district with scarce green space. 3) In the result of cluster analysis using the average linkage method between groups, biotope groups were divided into fifteen clusters and biotope groups were divided into seven clusters. Each cluster was named according to the features of a descriptive statistics analysis. For example, cluster 8 was identified as a biotope type with an impermeable pavement rate of more than 90 percent and an afforestation rate under 10 percent. 4) Fifteen biotope groups were converted to land use patterns for remote application and utilization of urban biotope in city planning. Biotope groups of a building area beyond an intermediate floor with an afforestation rate under 20-30 percent was converted to a land use pattern such as a tall apartment complex or commercial district. When examining the characteristics that were established in this research, there was a limit to achieve the objective of grade-classification because of a lack of related basic data. The research of landscape ecological characteristics for the classification of biotopes could not be completed due to a lack of time and resources, thus the study of ecological landscape characteristics will be accomplished over time.

• Journal of International Society for Simulation Surgery
• /
• v.4 no.1
• /
• pp.9-12
• /
• 2017

Purpose Surgery for separating craniopagus twins involves many critical issues owing to complex anatomical features. We demonstrate a 3D printed model and virtual reality (VR) technologies that could provide valuable benefits for surgical planning and simulation, which would improve the visualization and perception during craniopagus surgery. Material & Methods We printed a 3D model extracted from CT images of craniopagus patients using segmentation software developed in-house. Then, we imported the 3D model to create the VR environment using 3D simulation software (Unity, Unity Technologies, CA). We utilized the HTC Vive (HTC & Valve Corp) head-mount-display for the VR simulation. Results We obtained the 3D printed model of craniopagus patients and imported the model to a VR environment. Manipulating the model in VR was possible, and the 3D model in the VR environment enhanced the application of user-friendly 3D modeling in surgery for craniopagus twins. Conclusion The use of the 3D printed model and VR has helped understand complicated anatomical structures of craniopagus patients and has made communicating with other medical surgeons in the field much easier. Further, interacting with the 3D model is possible in VR, which enhances the understanding of the craniopagus surgery as well as the success rate of separation surgery while providing useful information on diagnosing and surgery planning.