• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.7
• /
• pp.1475-1482
• /
• 2009

In this paper, a computer simulation is developed for isotachophoretic protein separation in a serpentine micro channel for optimal lab on a chip design using 2D Finite Element Method. This 2D ITP model is composed of 5 components such as hydrochloric acid as Leader, caproic acid as terminator, acetic acid and benzoic acid as two proteins, and histindine as background electrolyte. The computer model is based on mass conservation equation for 5 components, charge conservation equation for electric potential, and electro neutrality condition for pH calculation. For the validation of the 2D spatial ITP model, the results are compared with the Simul5 developed by Bohuslav Gas Group. The simulation results are in a good agreement in a ID planar channel. This proves the precision of our model. The 2Dproteinseparation is conducted in a 2D curved channel for Lab on a chip design and dispersions of proteins are revealed during the electrophoretic process in a curved shape.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.12
• /
• pp.2763-2768
• /
• 2013

In this paper, a design method for a compact slot antenna for 5.8 GHz RFID band (5.725-5.875 GHz) is studied. The proposed slot antenna is size-reduced by bending both ends of the straight slot in "I"-shape, and a rectangular feed patch is located inside the slot. The effects of slot length, location of feed patch, and width and length of feed patch on the antenna performance are examined. A prototype antenna with optimized parameters for 5.8 GHz band is fabricated on an FR4 substrate and tested experimentally to verify the results of this study. The experimental results show that the frequency band for a VSWR < 3 ranges 5.72-6.13 GHz (bandwidth 410 MHz), and it corresponds fairly well with the simulated band 5.64-5.97 GHz (bandwidth 330 MHz). The fabricated antenna shows good radiation performance such as maximum power density in both directions normal to the slot plane, low cross-polarization level of < -20 dB, and realized gain > 0 dBi within the frequency band.

• Electronic Materials Letters
• /
• v.14 no.6
• /
• pp.700-711
• /
• 2018

CdS synthesized by the chemical bath method at $70^{\circ}C$, has been used as an electron transport layer in the planar structure of the perovskite solar cells. A two-step spin process produced a mixed halide perovskite of $CH_3NH_3PbI_{3-x}Cl_x$ and a mixture of $PbCl_2$ and $PbI_2$ was deposited on CdS, followed by a sub-sequential reaction with MAI ($CH_3NH_3I$). The added $PbCl_2$ to $PbI_2$ in the first spin-step affected the structure, orientation, and shape of lead halides, which varied depending on the content of Cl. A small amount of Cl enhanced the surface morphology and the preferred orientation of $PbI_2$, which led to large and uniform grains of perovskite thin films. In contrast, the high content of Cl produces a new phase PbICl in addition to $PbI_2$, which leads to the small and highly uniform grains of perovskites. An improved surface coverage of perovskite films with the large and uniform grains maximized the performance of perovskite solar cells at 0.1 molar ratio of $PbCl_2$ to $PbI_2$. The depth profiling of elements in both lead halide films and mixed halide perovskite films were measured by Rutherford backscattering spectroscopy, revealing the distribution of chlorine along with the thickness, and providing the basis for the mechanism for enhanced preferred orientation of lead halide and the microstructure of perovskites.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.32 no.6
• /
• pp.472-476
• /
• 2019

We have proposed a novel planar lightwave circuit (PLC) optical sensor to monitor the contamination in a flow-cell where water is continuously supplied through a water quality measurement system. We designed a PLC chip with a V-shape waveguide and the simulated its function as a sensor for monitoring contamination in a flow-cell using a numerical the FDTD (finite-difference time-domain) analysis. A novel cross type of waveguide was introduced to make the PLC chip of the V-shaped waveguide. The fabricated PLC was cut into the cross waveguide. A change in the optical propagation loss of the PLC sensor was observed after immersing the PLC sensor into city water. It was determined that the propagation loss of the PLC sensor was 3 dB at a wavelength of $1.55{\mu}m$ in the city water for 15 days.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.34 no.5
• /
• pp.296-300
• /
• 2021

The performance of devices has been improved with fine processes from planar to three-dimensional transistors (e.g., FinFET, NWFET, and MBCFET). There are some problems such as a short channel effect or a self-heating effect occur due to the reduction of the gate-channel length by miniaturization. To solve these problems, we compare and analyze the electrical and thermal characteristics of FinFET and GAAFET devices that are currently used and expected to be further developed in the future. In addition, the optimal structure according to the Fin shape was investigated. GAAFET is a suitable device for use in a smaller scale process than the currently used, because it shows superior electrical and thermal resistance characteristics compared to FinFET. Since there are pros and cons in process difficulty and device characteristics depending on the channel formation structure of GAAFET, we expect a mass-production of fine processes over 5 nm through structural optimization is feasible.

• Wind and Structures
• /
• v.34 no.1
• /
• pp.15-27
• /
• 2022

This work comes within the framework of the "Benchmark on the Aerodynamics of a Rectangular Cylinder" that investigates a rectangular cylinder of length-to-depth ratio equal to 5. The present study reports and discusses velocity fields acquired using planar Particle Image Velocitmetry for several angles of attack and Reynolds numbers. In particular, for a cylinder depth-based Reynolds number of 2 × 10⁴ and zero incidence angle, the flow features along the lateral (parallel to the freestream) upper and lower surfaces of the cylinder are reported. Using first and second order statistics of the velocity field, the main flow features are discussed, especially the size and location of the time-averaged flow structures and the distribution of the Reynolds stresses. The variation of the flow features with the incidence is also studied considering angles of attack up to 6°. It is shown that the time-averaged flow is fully detached for incidence higher than 2°. For an angle of attack of 0°, the effects of the Reynolds number varying between 5 × 10³ and 2 × 10⁴ are investigated looking at flow statistics. It is shown that the time-averaged location of the reattachment point and the shape and position of the time-averaged main vortex are mostly constant with the Reynolds number. However, the size of the inner region located below the time-averaged shear layer and just downstream the leading edge corner appears to be strongly dependent on the Reynolds number.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.4
• /
• pp.203-210
• /
• 2020

Spatial variation of diffracting wave amplitudes along a semi-infinite breakwater is investigated using the analytical solution of Penney and Price (1952) for wave diffraction. On the front side of the breakwater, the fluctuation of wave amplitudes due to diffracting waves would cause a wave force greater than that of superposed incident and reflected waves. The diffracting wave phase varies in circular shape from the breakwater tip of (x, y) = (0, 0) whereas the incident and reflected wave phases vary in planar shape. So, the total wave amplitude of the incident (or reflected) waves and the diffracting waves would fluctuate at a position away from the energy discontinuity line. The position (x, y) = (0, y) on the front and lee sides of the breakwater is at a distance y(π/2 - β) of the point on the energy discontinuity line along the diffracting wave crest line. The degree of reduction of the diffraction wave energy is proportional to the distance from the point on the energy discontinuity line along the diffracting wave crest line. Therefore, the diffracting wave amplitudes on the front and lee sides of the breakwater would be inversely proportional to the square root of y(π/2 - β).

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.2
• /
• pp.97-107
• /
• 2017

This study is the second investigation on the steady flow characteristics of an SI engine with a semi-edge combustion chamber as a function of the port shape with varying evaluation positions. For this purpose, the planar velocity profiles were measured from 1.75B, 1.75 times of bore position apart from the bottom of head, to 6.00B positions using particle - image velocimetry. The flow patterns were examined with both a straight and a helical port. The velocity profiles, streamlines, and centers of swirl were almost the same at the same valve lift regardless of the measuring position, which is quite different from the case of the pent-roof combustion chamber. All the eccentricity values of the straight port were out of distortion criterion 0.15 through the lifts and the position. However, the values of the helical port exceeded the distortion criterion by up to 4 mm lift, but decreased rapidly above the 3.00B position and the 5 mm lift. There always existed a relative offset effect in the evaluation of the swirl coefficient using the PIV method due to the difference of the ideal impulse swirl meter velocity profile assumption, except for the cylinder-center-base estimation that was below 4 mm of the straight port. Finally, it was concluded that taking the center as an evaluation basis and the assumption about the axial velocity profile did not have any qualitative effect on swirl evaluation, but affected the value owing to the detailed profile.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.33 no.2
• /
• pp.1-11
• /
• 2015

This study sheds light on a pond design process which is a core facility of Hwaseol-dang in Muan, the Jeonnam. The plasticity of the pond was analyzed and interpreted for the design process using methods such as "literature search, interview, site visits, aerial pictures, aerial photographing, drawing figures of configuration plane via measurements, internet search, etc.", to trace the developing process of the design and the implications therein. The study results being centered on the developing process of the pond design are summarized herein below. The position of the Hwaseol-dang, being formed on a low hill having low competence as a place for a pavilion, draws more attention regarding its implications from the aspect of inner design. The pond Hwaseol-dang is in a rectangular shape of 1 : 1.2 ratio, in which the depth is a bit higher on the pond edge of the Hwaseol-dang thus being slanted, and Crape Myrtle, which is not known whether introduced during the formation of the pond, is cultivated on the island in the center widespread toward the southeast region. The planar design of the pond is interpreted as "rectangular pond" but it has a smooth half-moon shape where a part is excluded to remove edge. In particular, the three islands in rectangular pond, due to the narrow area, put one island and two half-moon-shaped islands in juxtaposition, and thus, although only being one island, resultantly exhibits the existence effect of proliferated three islands. This is allegedly due to the intentional formation aiming at the effect of hybrid while minimizing the overlap due to merging and adding from the aspect of constituting a design. Furthermore, the pond Hwaseol-dang is extended northwest along with Hwaseol-dang, and also the island in the center is thought to additionally have one or two, but the widespread phenomenon of the island in the center appears to consider the effect of "sit view on the floor of the pavilion of Hwaseol-dang". Considering that even a few examples of ponds having the three islands among the private house gardens in the nation are all curved ponds, the characteristics of the rectangular Hwaseol-dang pond establishing the garden effect of the three islands by modifying the one island in rectangular pond is highly notable. Considering that the three islands of "Yeongju, Bangjang, and Bongrae" is the original shape of the pond garden gestating Taoist ideology, as a symbolic design of a pond, it is regarded as the characteristics of the pond shape in Jeonnam area, and the so-called three treasures "Hwaseol-dang, Camellia, and oddly shaped stones, etc." are concentrated as the symbolism of Hwaseol-dang pond.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.40 no.4
• /
• pp.32-48
• /
• 2022

This study analyzed the construction pattern and historical reality of Gwallamji Pond(觀纜池) in the rear garden of Changdeokgung Palace(昌德宮), which has been received as distorted information and has not received sufficient attention. The main topics consisted of the construction period and reorganization in the pond garden, changes in the installed wooden bridge, the existence of the berthing facility, and whether the plan shape was deformed. The main results of this study can be summarized as follows. First, the Gwallamji Pond was already completed before the Gapsin Coup, which occurred in the year of King Gojong. Since then, the Gwallamji Pond area, including the surrounding facilities, has been neglected for a while and was extensively renovated in the early 1900s. It is difficult to find a clear basis for the suspension and resumption of the Gwallamji Pond construction proposed in the previous discussion. Second, three types of wooden bridges with different shapes and structures were installed sequentially in the Gwallamji Pond. In particular, the second wooden bridge, which installed after the maintenance of the Gwallamji Pond, is judged to be the pontoon bridge depicted in Donggweoldohyeong(東闕圖形), and the railing of the bridge was decorated to symbolize the imperial family of the Korean Empire. The third wooden bridge, which appeared intensively in Japanese colonial era, was a Japanese-style bridge. Third, a berth facility for boarding and disembarking existed on the eastern shore of the Gwallamji Pond. The berth facility is also described in Donggweoldohyeong and it remained until the Japanese colonial period. However, as the maintenance work of the Gwallamji Pond was carried out several times after liberation, the berth facility was gradually damaged, and there are no traces left now. Fourth, The Gwallamji Pond was originally constructed in a planar shape of the Korean Peninsula similar to the present. It is necessary to reconsider the conventional theory that the Gwallamji Pond, made in the shape of a gored-shaped bottle, was renovated in the shape of the Korean Peninsula in Japanese colonial era. Even when the term Pandoji Pond(半島池) first appeared, there was no view that the Japanese intentionally modified the Gwallamji Pond.