• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 학술대회지
• /
• pp.804-809
• /
• 2004

It is essential to calibrate a camera in order to recover 3-dimensional reconstruction from uncalibrated images. This paper proposes a new technique of the camera calibration using a homography between the planar patterns image taken by the camera, which is located at the three planar patterns image. Since the proposed method should be computed from the homography among the three planar patterns from a single image, it is implemented more easily and simply to recover 3D object than the conventional. Experimental results show the performances of the proposed method are the better than the conventional. We demonstrate the examples of 3D reconstruction using the proposed algorithm from image sequence.

• 한국통신학회논문지
• /
• 제31권4C호
• /
• pp.381-390
• /
• 2006

본 논문에서는 비 교정 영상에서 3장의 평면 패턴 영상들을 위치시켜, 한 장의 영상으로 찍어 얻은 영상으로부터 이들 평면 패턴 영상 간에 호모그래피(homography)로 카메라 교정을 하는 새로운 기법이 제안된다. 비교정 영상에서 3차원 재구성을 하려면 카메라 교정이 필수적이다. 제안된 방법은 대상 영상내에 존재하는 패턴 영상 간에 호모그래피를 계산함으로써, 3차원 재구성 시, 보다 쉽고 간단히 구현한다. 실험 결과는 제안된 방법(한 장내에 3장의 패턴영상 사용에 의한 카메라 교정법이 기존 방법(3장의 패턴영상 사용에 비해 매우 유용함을 확인한다. 또한, 비 교정 입력 영상에서 제안된 알고리즘을 이용한3차원 재구성의 예로 증명한다.

• 한국전기전자재료학회논문지
• /
• 제18권12호
• /
• pp.1106-1110
• /
• 2005

We fabricated (110) silicon hard master by using anisotropic wet etching for embossing. The etching chemical for the silicon wafer was a TMAH $25\%$ solution. The anisotropic wet etching produces a smooth sidewall surface and the surface roughness of the fabricated master is about 3 nm. After spin coating an organic-inorganic sol-gel hybrid material on a silicon substrate, we employed hot embossing technique operated at a low pressure and temperature to form patterns on the silicon substrate by using the fabricated master. We successfully fabricated the multi-mode planar optical waveguides showing low propagation loss of 0.4 dB/cm. The surface roughness of embossed patterns was uniform for more than 10 times of the embossing processes with a single hydrophobic surface treatment of the silicon hard master.

• 한국정보통신학회논문지
• /
• 제12권3호
• /
• pp.563-568
• /
• 2008

M개의 다중모드 평면 도파로와 N개의 홀로그램 필터를 이용하여 M개의 입력단자와 N개의 출력단자 사이에 광신호 교환을 수행할 수 있는 방법을 제안한다. 열광학 폴리머로 제작된 다중모드 평면 도파로는 광신호 교환을 위한 광신호 경로를 제공하고, 전기적 신호로 출력 스페클 패턴을 변화시킨다. 다중모드 평면 도파로로부터 발생한 스페클 패턴들은 연결 목적지를 결정하는 목적코드로 이용되며, 공간다중화 된 홀로그램 필터에 의해 출력단자로 연결된다. 제안한 시스템에 대해 광신호 교환이 가능함을 실험적으로 보였다.

• Journal of Information Display
• /
• 제12권2호
• /
• pp.101-107
• /
• 2011

To come up with a bistable liquid crystal (LC) device using unpolarized UV light, single-step laser patterning on a photoalignment layer using a photomask was proposed to achieve an equilibrium configuration of LC molecules in contact with a periodically patterned substrate. The patterns were formed by stripes of alternating random planar and homeotropic anchoring on a submicrometer scale in the order of $0.5{\mu}m$. Two possible configurations of bistable LC cells that can be obtained by combining a micropatterned surface formed with alternating random-planar- and homeotropic-alignment with planar- or homeotropic-alignment surfaces were proposed. The alignment properties of the two proposed models were investigated, along with the microscopic switching behavior of micropatterned nematic LC cells.

• 한국전자파학회논문지
• /
• 제29권12호
• /
• pp.924-934
• /
• 2018

본 논문에서는 화포탐지 레이다에 사용되기 위해서 개발된 C-대역 평면형 능동위상배열 안테나의 설계 및 제작 그리고 측정 결과를 소개한다. 안테나는 3,000여 개의 반도체 송수신 채널과 복사소자를 삼각배열로 배치하고, DBF(digital beam forming)를 사용하여 수신빔을 형성하기 위한 14개 부배열(12개 주 채널, 2개 SLB 채널)을 구성하여 개발하였다. 개발된 평면형 능동위상 배열 안테나의 성능을 확인하기 위해 근접 전계 시험 시설을 이용하였으며, 송신 패턴 측정을 통해 송신 안테나이득, 부엽 레벨, 수신 패턴 측정을 통해 수신 안테나이득, 부엽레벨, 디지털빔 형성, 빔조향 범위, G/N을 확인하였다. 송신 수신 패턴 측정 결과, 개발 목표성능을 만족함을 확인하였다.

• Advances in robotics research
• /
• 제2권2호
• /
• pp.141-149
• /
• 2018

In image processing and robotic applications, two-dimensional (2D) black and white patterned planar markers are widely used. However, these markers are not detectable in low visibility environment and they are not changeable. This research proposes an active and adaptive marker node, which displays 2D marker patterns using light emitting diode (LED) arrays for easier recognition in the foggy or turbid underwater environments. Because each node is made to blink at a different frequency, active LED marker nodes were distinguishable from each other from a long distance without increasing the size of the marker. We expect that the proposed system can be used in various harsh conditions where the conventional marker systems are not applicable because of low visibility issues. The proposed system is still compatible with the conventional marker as the displayed patterns are identical.

• 한국광학회지
• /
• 제7권4호
• /
• pp.333-340
• /
• 1996

기존 퓨리에 변환의 일반화된 형식인 분수차 퓨리에 변환을 평판집적 광학계로 구현하였다. 구현된 평판집적 광학계는 동일한 2차원 입력패턴에 대해 서로 다른 분수차를 갖는 4개의 FRT의 결과를 얻을 수 있는 구조를 가지며 모든 부품들은 레이저 빔 묘화장치를 이용하여 하나의 유리판에 동시에 제작되었다. FRT 실험결과를 계산치와 비교 분석함으로써 평판집적 광학계가 기존의 자유공간 광학계가 갖는 3차원적 광신호 전달 특성과 이에 따른 높은 신호의 공간대역폭을 가지고 매우 정확한 FTR를 수행할 수 있음을 검증하였다.

• 한국실내디자인학회논문집
• /
• 제17권4호
• /
• pp.84-91
• /
• 2008

The objective of this study is to investigate how visitors' behavior change in relation to the pattern of exhibition in art museum. For the purpose Busan Museum of Modern Art was selected as the sample in this study. And two patterns of exhibition, namely the planar exhibition and the three dimensional exhibition, were surveyed using the tracking movement method. The data gathered from random-sampling 60 visitors in a art museum was analyzed by the correlation analysis and T-test. The results are as follows; 1) There is no meaningful difference in visitors' behavior by the exhibition pattern in terms of their viewing area, viewing time, viewing distance, viewing velocity, viewing rate. 2) In contrast, there is meaningful difference in terms of the number of stops by visitors and the time spent without movement to see the objects; visitors stopped more often and stayed longer within the three dimensional exhibition space than the planar exhibition in a art museum. In sum, visitors extrinsically show no big behavioral difference between the planar exhibition and the three dimensional exhibition, but much difference in the way they communicate with objects; they show more active behavior within the three dimensional exhibition space.

• 한국소음진동공학회논문집
• /
• 제20권9호
• /
• pp.856-862
• /
• 2010

In this paper, the power flow analysis(PFA) method was developed to predict the vibrational responses of coupled co-planar orthotropic plates in frequencies ranging from medium to high. To cover the power transmission and reflection at the joint of the orthotropic plates, the wave transmission approach is applied with the assumption that all the incident waves are normal to the joint. Through numerical analyses, the power flow energy density and intensity fields of coupled co-planar orthotropic plates were compared with those of classical modal solutions by changing the frequency and internal loss factor, and they show good agreement in terms of the global decay and the attenuation patterns of the energy density.