• The Korean Journal of Air & Space Law and Policy
• /
• v.32 no.1
• /
• pp.225-285
• /
• 2017

In regard to the regulations related to the RPA(Remotely Piloted Aircraft), which is sometimes called in other countries as UA(Unmanned Aircraft), ICAO stipulates the regulations in the 'RPAS manual (2015)' in detail based on the 'Chicago Convention' in 1944, and enacts provisions for the Rules of UAS or RPAS. Other contries stipulates them such as the Federal Airline Rules (14 CFR), Public Law (112-95) in the United States, the Air Transport Act, Air Transport Order, Air Transport Authorization Order (through revision in "Regulations to operating Rules on unmanned aerial System") based on EASA Regulation (EC) No.216/2008 in the case of unmanned aircaft under 150kg in Germany, and Civil Aviation Act (CAA 1998), Civil Aviation Act 101 (CASR Part 101) in Australia. Commonly, these laws exclude the model aircraft for leisure purpose and require pilots on the ground, not onboard aricraft, capable of controlling RPA. The laws also require that all managements necessary to operate RPA and pilots safely and efficiently under the structure of the unmanned aircraft system within the scope of the regulations. Each country classifies the RPA as an aircraft less than 25kg. Australia and Germany further break down the RPA at a lower weight. ICAO stipulates all general aviation operations, including commercial operation, in accordance with Annex 6 of the Chicago Convention, and it also applies to RPAs operations. However, passenger transportation using RPAs is excluded. If the operational scope of the RPAs includes the airspace of another country, the special permission of the relevant country shall be required 7 days before the flight date with detail flight plan submitted. In accordance with Federal Aviation Regulation 107 in the United States, a small non-leisure RPA may be operated within line-of-sight of a responsible navigator or observer during the day in the speed range up to 161 km/hr (87 knots) and to the height up to 122 m (400 ft) from surface or water. RPA must yield flight path to other aircraft, and is prohibited to load dangerous materials or to operate more than two RPAs at the same time. In Germany, the regulations on UAS except for leisure and sports provide duty to avoidance of airborne collisions and other provisions related to ground safety and individual privacy. Although commercial UAS of 5 kg or less can be freely operated without approval by relaxing the existing regulatory requirements, all the UAS regardless of the weight must be operated below an altitude of 100 meters with continuous monitoring and pilot control. Australia was the first country to regulate unmanned aircraft in 2001, and its regulations have impacts on the unmanned aircraft laws of ICAO, FAA, and EASA. In order to improve the utiliity of unmanned aircraft which is considered to be low risk, the regulation conditions were relaxed through the revision in 2016 by adding the concept "Excluded RPA". In the case of excluded RPA, it can be operated without special permission even for commercial purpose. Furthermore, disscussions on a new standard manual is being conducted for further flexibility of the current regulations.

• Journal of the military operations research society of Korea
• /
• v.34 no.3
• /
• pp.31-40
• /
• 2008

The aircraft manufacturing industry is a profitable business and has the potential to be an important export business. Our trade deficit needs to be improved in aircraft manufacturing part. Our national aircraft industry, which has been recognized for its quality in many domestic and international Air Shows, has developed the T/A-50 aircraft from the origins of the KT-1. With the ongoing development of the next generation fighter planes and helicopters, business for the next generation domestic air cargo has bright prospects. Judging by the history of the overseas air force dispatch during the Vietnam, Gulf, and Iraqi wars whose main mission was air transportation, there will be many opportunities to show the excellence of Korean air cargo in the future. The purpose of this study is to discover the optimal scale of air cargo development using the AHP method. The authors evaluated the scale of air cargo in size and capacity based on the following 5 standards used Korean developing airliner: usability, economics, technology, safety, and environmental friendliness. Then, the authors modified specific standards suitable for air cargo based on literature review Decision-making groups were chosen for suitability of expert staff in charge because they could represent for leading opinions in this specialized area especially as in practical aspects. The participants of the evaluation were pilots, transportation officers and management staff in the KAI who have experienced over 5years.

• Journal of Korean Society of Transportation
• /
• v.22 no.5
• /
• pp.89-97
• /
• 2004

The Korea Air Force(KAF) has operated freight flights based on the prefixed time and route schedule, which is adjusted once in a month. The major purpose of the operation of freight flights in the KAF is to distribute necessary supplies from the home air base to other air bases. The secondary purpose is to train the young pilots to get more experiences in navigation. Each freight flight starts from and returned to the home air base everyday except holidays, while it visits several other air bases to accomplish its missions. The study aims to forecast freight demand at each base by using time series analysis, and then it tried to optimize the cost of operating flights by solving vehicle routing problem. For more specifically, first, several constraints in operating cargos were defined by reviewing the Korea Air Force manuals and regulation. With such constraints, an integer programming problem was formulated for this specific routing problem allowing several visits in a tour with limitation of maximum number of visits. Then, an algorithm to solve the routing problem was developed. Second, the time series analysis method was applied to find out the freight demand at each air base from the mother air base in the next month. With the forecasted demands and the developed solution algorithm, the oprimum routes are calculated for each flight. Finally, the study compared the solved routing system by the developed algorithm with the existing routing system of the Korea Air Force. Through this comparison, the study proved that the proposed method can provide more (economically) efficient routing system than the existing system in terms of computing and monetary cost. In summary, the study suggested objective criteria for air routing plan in the KAF. It also developed the methods which could forecast properly the freight demands at each bases by using time series analysis and which could find the optimum routing which minimizes number of cargo needed. Finally, the study showed the economical savings with the optimized routing system by using real case example.

• Journal of Korean Society of Transportation
• /
• v.23 no.4 s.82
• /
• pp.7-16
• /
• 2005

Rejected Takeoff Accidents are not common. but if occurred, it leads to big disaster From the year of 1959, when Jet Transport service opened, to the year of 2000, Rejected Takeoff accidents/incidents occurred total of 94 cases. All cases led to overrun, and major cause is to initiate stopping maneuvers over $V_1$, takeoff decision speed, according to National Transport Safety Board of America. Similar results are represented in Aviation Safety Reporting System of National Aeronautics and Space Administration. So I believe that it is worth studying if Airplane Flight Manual, which is the reference Performance criteria, is appropriate to operations of line pilots. The definition of $V_1$ has been revised a couple of times and Rejected Takeoff Certification Standards for Transport Airplanes was changed in 1998. It shows that up to now there are some portions unreasonable. This study focused on gathering the pilot's tendency for current Rejected Takeoff Procedures of K airlines and analyze the factors they concern. I chose B777 airplane and actually measured the recognition and reaction time of the rejected takeoff transitions through Simulators. And compared the results with the data of flight test and Airplane Flight Manual.

• Journal of the Korean Institute of Navigation
• /
• v.21 no.2
• /
• pp.47-58
• /
• 1997

The purpose of this study is to find out the impacts of VTS on the marine safety and users' opinion on the VTS which have been being operated in the port of Pohang for the last 3 years and is to suggest a guideline to the successful operation of VTS in the future. This study is based upon the questionnaire survey and the respondents include 236 masters/mates of merchant vessels who have visited the port of Pohang and 6 pilots who have been working in the port. From the questionnaire results, this study notes the following conclusions related to the VTS operations. (1) A few of the respondents (mainly foreigners) do not understand the entering procedure of the port and the fundamental concept of VTS. Accordingly, the more active VTS services have to be provided for the mariners. (2) It was found that themost dangerous factors in tehvicinity of the port were the floating materials, fishing nets, andillegal fishing activities inthe fairway. Therefore, the proper surveillance, stricter enforcement of Acts and the instructive education for the fishermen are required to avoid the risks. (3) A majority of the respondents agreed the VTS has contributed to the safety of vessel traffic, and they pointed out ' the assiatances in reduced visibililty conditions' is the most important task of VTS. The amount of 75.6% of the respondents answered that they have experienced the assistance from VTS more than 1 time since the system was established in the port of Pohang . Also 44.2% of the respondents considered they were able to avoid marine casualties such as collision, ramming or agrounding with the VTS assistances. (4) 49.2% of the respondents preferred the passive information services , while, 38.8% of them preferred the positive control advices in the case of encountering any potential risks. VTS iperators have to consider seriously when they provide the positive control advices of ship's course and speed. (5) A majority of the respondents confirmed that the prot and its approaches is suitable for the VTS coverge . To extend the service areas of the VTS and to improve radar detecting ability, the use of radar transponders are seen as the ideal method. (6) A minority of the respondents pointed out 'the improper orders or recommendatinos caused by the poor decision making' firstly, ' the language problem(sea-speaking in English)' secondly, as the deficiency of personal qualification. It seems, therefore, theat the personal efforts of the operators and systematic training programmes for them are necessary to solve the problems.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.7
• /
• pp.662-669
• /
• 2017

Military rotary aircraft are heavily exposed to projectile environments due to their mission characteristics, and fires caused by fuel leaks after shooting are linked directly to the loss of human life. To improve the survivability of pilots and crews, the fuel tank in rotary aircraft must have gunfire resistance and anti-explosion characteristics. Gunfire resistance can be satisfied by applying a self-sealing cell to a fuel tank. Anti-explosion can be satisfied by reducing the oxygen concentration in an explosive area and suppressing the generation of combustible fuel vapor by minimizing the evaporation rate of the fuel by heat. A Korean utility helicopter applies anon-board inert gas generation system to meet the anti-explosion requirements for ballistic impact. The generator fills the fuel tank with an inert gas and reduces the oxygen concentration. This paper describes the overall development process of the OBIGGS developed in accordance with the localization process of weapon components. OBIGGS was developed/manufactured through domestic technology, and the performance was found to be equal to or better than that of the existing products through single performance tests and aircraft mounting tests.

• Journal of the Korean Institute of Navigation
• /
• v.15 no.1
• /
• pp.12-47
• /
• 1991

This work aims to introduce the concept of microcomputer aided port design simulation methodology including the analysis of the mathematical models to be implemented and apply it to the Third Stage Busan Port Development Project. In the Busan case study, the size of the proposed turning basin of the new terminal, together with the operational strategies of berthing and unberthing, was examined, In addition, the safety on ship's entry and exit through the projected new breakwaters was ascertained. From the application of simulation to the Busan project, it was found that the proposed dredging area was not sufficiently wide enough for the modelled container ship to perform A time unberthing (in which the ship turns to port as she manoeuvres away from N.1. Berth with the assistance of tugs), especially in a strong easterly wind. It is therefore, recommended that Busan pilots should be advised to sue B type unberthing strategy, in which the ship goes astern from no.1 berth tot he turning area in front of No.2 berth(where the ship turns 180 degrees clockwise), especially when the wind is very strong, It is also recommended that a sea buoy be placed outside the new breakwaters, as this was found to improve the safety of ship manoeuvres through the breakwaters significantly . Another recommendation is that the Korean hydrodynamic Office carry out a detailed survey of the currents in the water area near the new breakwaters once they have been constructed. In addition, it is to be recommended that a current meter be placed at the recommended sea buoy to improve the safety of ship manoeuvres which could otherwise be jeopardised by eeroneos current information.

• KIPS Transactions on Software and Data Engineering
• /
• v.6 no.9
• /
• pp.429-436
• /
• 2017

Unmanned Aerial Vehicles (UAV) that are piloted without human pilots can be commanded remotely via frequencies or perform pre-inputted missions. UAVs have been mainly used for military purposes, but due to the development of ICT technology, they are now widely used in the private sector. Teal Group's 2014 World UAV Forecast predicts that the UAV market will grow by 10% annually over the next decade, reaching $ 12.5 billion by 2023. However, because UAVs are primarily remotely controlled, if a malicious user accesses a remotely controlled UAV, it could seriously infringe privacy and cause financial loss or even loss of life. To solve this problem, a secure channel must be established through mutual authentication between the UAV and the control center. However, existing security techniques require a lot of computing resources and power, and because communication distances, infrastructure, and data flow are different from UAV networks, it is unsuitable for application in UAV environments. To resolve this problem, the study presents a lightweight UAV authentication method based on Physical Unclonable Functions (PUFs) that requires less computing resources in the ground Control and Non-Payload Communication (CNPC) environment, where recently, technology standardization is actively under progress.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.3 s.345
• /
• pp.49-58
• /
• 2006

In this paper, a curve-fitting channel estimation method is proposed for orthogonal frequency division multiplexing (OFDM) system in a time-varying frequency-selective fading channel. The method can greatly improve channel state information (CSI) estimation accuracy by performing smoothing and interpolation through consecutive curve-fitting processes in both time domain and frequency domain. It first evaluates least-squares (LS) estimates using pilot symbols and then the estimates are approximated to a polynomial with proper degree in the LS error sense, starting from one preferred domain in which pilots we densely distributed. Smoothing, interpolation, and prediction are performed subsequently to obtain CSI estimates for data transmission. The channel estimation processes are completed by smoothing and interpolating CSI estimates in the other domain once again using the channel estimates obtained in one domain. The performance of proposed method is influenced heavily on the time variation and frequency selectivity of channel and pilot arrangement. Hence, a proper degree of polynomial and an optimum approximation interval according to various system and channel conditions are required for curve-fitting. From extensive simulation results in various channel environments, we see that the proposed method performs better than the conventional methods including the optimal Wiener filtering method, in terms of the mean square error (MSE) and bit error rate (BER).

• Journal of Preventive Medicine and Public Health
• /
• v.26 no.3 s.43
• /
• pp.387-399
• /
• 1993

This study was conducted to analyze blood lipid profile and other risk factors among crew members who are currently active and had more than 10 years of experience as crew members. Data was analyzed using medical record files in an airline medical department. The results are as follows. 1. The total number of crew members studied was 392. Among age groups, those below age 40 consisted of 26(6.9% of the total), those in age $41{\sim}50$ were 135 (34.4%) and those over age 51 were 230 (58.7%). 263 were former air force pilots consisting 66.9%. Those who had captain status numbered 21 I comprising 53.7% of the total. The type of aircraft most of the crew members involved were large size aircraft which totaled 268 (68.2%). With respect to the number of working years as crew members, 488(48.9%) comprised the largest group with $11{\sim}15$ years. 2. The rate of smoking among crew members has shown gradual decrease with 50.3% smoking in 1983 to 33.6% in 1993. Among $41{\sim}50$ age group the rate has shown a decrease from 20.9% to 13.3% In those group over age 51 it decreased from 25.5% to 16.6%. But group below age 40 were within the range of 3.6~3.8% with no significant change in the rate of smoking. 3. Body Mass Index in age group over 51 was slightly higher than other age groups. On the whole, BMI over 25 was not found. 4. The total cholesterol levels of those below age 40 were $196.9{\pm}38.5mg/dl,\;216.2{\pm}39.2mg/dl$ in ages $41{\sim}50$, and $225.1{\pm}42.5mg/dl$ in age group over 51. No significant difference was found among age groups. 5. HDL-cholesterol levels of over age 50 were higher than other age group and ranged from $40{\sim}55mg/dl$. 6. LDL-cholesterol levels of those over 51 were $126.7{\pm}37.7mg/dl$ higher than other age groups. But there were no significant changes in all age during 10 years of follow up. 7. Cardiac index of age group below age 40 was 3.8, 4.3 in age group $41{\sim}50$ and 4.5 in those over age 51 group. No significant changes among groups were found during the follow up period. 8. Triglyceride levels of age group below age 40 was $142.2{\pm}70.1,\;167.3{\pm}77.5$ in age group of $41{\sim}50$ and $113.6{\pm}897$ in age group over 50 showing that triglyceride levels increased with age. No significant changes in pattern were noted.