• The Journal of Korean Physical Therapy
• /
• v.22 no.2
• /
• pp.15-23
• /
• 2010

Purpose: This study was done to establish reference data for temporo-spatial, kinematic and kinetic parameters for normal Koreans as they age. Methods: Normal adults and children without a previous history of musculoskeletal problems were enrolled in this study. The normal subjects were divided by age into three groups: Group I: children ($11.95{\pm}0.29$ years); Group II: young adults ($23.90{\pm}3.67$ years); Group III: older adults ($71.40{\pm}4.08$ years). The temporo-spatial and kinematic data were measured using 6 MX3 cameras while each subject walked through a 10 m walkway at a self-selected speed. The kinetic data were measured using 2 force plates and were calculated by inverse dynamics. Results: Motion patterns are typically associated with a specific phase of the gait cycle. Our results were as follows: 1. There were significant differences between the different age groups in temporo-spatial parameters such as cadence, double support, time of foot off, stride length, step length, and walking speed. 2. There were significant differences between the groups in kinematic parameters such as range of motion (ROM) of the hip, knee and ankle in the sagittal plane, ROM of the pelvis, hip and knee in the coronal plane and ROM of the pelvis, hip and ankle in the transverse plane. 3. There were significant differences between the groups in kinetic parameters such as joint moments of force, joint mechanical power generation or absorption and ground reaction forces. Conclusion: The results of this study can be utilized (a) as a reference for kinematic and kinetic data of gait analysis in normal Koreans, and (b) as an aide in evaluating and treating patients who have problems relating to gait.

• The Korean Journal of Food And Nutrition
• /
• v.6 no.4
• /
• pp.255-267
• /
• 1993

This study was performed to investigate the correlations among physical anthropometric measurement, diet intakes, physical fitness test, and serum lipids in eight sedentary women(control group), and twenty seven exercising women(aerobic groups), aged 35~45 years. The results of the study are as follows : 1) systolic blood pressure(SBP) and diastolic blood pressure(DBP) of aerobic groups were lower than serf entary. Pulse rate was decreased according to the length of aerobic periods. Muscular endurance and jump power of all subjects were stronger than standard range, and those of aerobic exercising groups were stronger than control group. Muscular power of the upper half of the body In all subjects were lower than standard range. 2) Daily calorie intakes of all subjects were in the ring: of recommended dietary allowances (RDA) for Koreans. But daily protein Intakes were higher than RDA. daily cholestrol intakes of all subjects were slightly less than 200~300 mg: which is normal consumption of Koreans. 3) There was a significant positive correlation between serum 7G and daily protein intakes. It was considered that excessive protein intake converted to serum 7G. There was not a significant correlation between serum TC and dietary TC. Therefore, dietary TC seemed to have not much effect on serum TC. Physical fitness was negatively related to serum TG, TC, LDL-C, but positively related to HDL-C, HDL-C /TC. It was found that the serum lipids could be changed better according to improving the physical fitness. There were significant positive correlations between SBP and serum TC, LDL-C. (According to this results), the higher SBP, the higher serum TC, LDL-C tended to be. There was a significant positive correlations between sit up and weightloss nth exercise r=0.7(p<0.001), push ups and weightless with exercise r=0.5(p<0.001). It was considered that muscle strength could be improved according to the weightloss. 4) The purpose of exercise in aerobic groups was rather promoting health than reducing body fatness. Most of al1 subjects (83.2%) drank caffeine-contained beverage therefore, we should concern about that absorption of Fe could be Interrupted and blood pressure could be elevated by caffeine.

• The Journal of Engineering Geology
• /
• v.24 no.2
• /
• pp.161-169
• /
• 2014

We present the results of an experimental physical weathering study that focuses on fresh and slightly weathered gneiss samples from the Wonju area of Korea. The study investigated changes in the physico-mechanical properties of these samples during accelerated laboratory-based weathering, including analyses of microfracture formation. The deteriorated samples used in the study were subjected to 100-150 freeze-thaw cycles, with index properties and microfracture geometries measured between each cycle. Each complete freeze-thaw cycle lasted 24 hours, and consisted of 2 hours of saturation in a vacuum chamber, 8 hours of freezing at $-21^{\circ}C{\pm}1^{\circ}C$, and 14 hours of thawing at room temperature. Specific gravity and seismic velocity values were negatively correlated with the number of freeze-thaw cycles, whereas absorption values tended to increase. The amount of deterioration of the rock samples was dependent on the degree of weathering of the rock prior to the start of the analysis. Absorption, specific gravity, and seismic velocity values can be used to infer the amount of physical weathering experienced by a gneiss in the study area. The sizes and density of microfracture in the rock specimens varied with the number of freeze-thaw cycles. We found that box fractal dimensions can be used to quantify the formation and propagation of microfracture in the samples. In addition, these box fractal dimensions can be used as a weathering index for the mid-and long-term prediction of rock weathering. The present results indicate that accelerated-weathering analysis can provide a detailed overview of the weathering characteristics of deteriorated rocks.

• Journal of the Korea Institute of Building Construction
• /
• v.14 no.1
• /
• pp.94-101
• /
• 2014

Approximately 240,000 tons of waste shells are produced annually in the south and west coast of South Korea. Some of these waste shells (oyster, cockle) are recycled as seeding collector and fertilizer, but most are dumped illegally near the coast. One of the alternative solutions that can economically utilize a large amount of these waste shells is to apply them to the production of construction materials. In this research, the basic physical properties of waste shells such as oyster, cockle, clam, manila clam were investigated, and were used to prepare cement mortar with a 25% replacement ratio of sand. According to the results, the 28 day compressive strength of cement mortar with cockle and manila clam shells was similar to that of plain cement mortar. The compressive strength decreased by about 18% when clam was used. However, the cement mortar with oyster shell showed about a 35% reduction in 28-day compressive strength, and two times the absorption capacity of plain cement mortar. The reduction in compressive strength and the increase in absorption capacity were mostly associated with the porous nature of the oyster shell.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.4
• /
• pp.384-388
• /
• 2006

The adsorption ability of polar and toxic substance was greatly enhanced by treating activated carbon with acid solution and impregnating iron, copper, or silver by using in 0.1 M $FeSO_4{\cdot}7H_2O,\;CuSO_4{\cdot}5H_2O,\;AgNO_3$ 300 mL per activated carbon 50 g. Physical and chemical properties of the metal impregnated activated carbons were measured using specific surface area, pore volume and size distribution, scanning eletron microscope(SEM), adsorption isotherm. When activated carbon was treated with acid, the quantity of impregnated metal increased about 1.3 times since the micropores were converted to mesopores or macropores. Both the physical absorption by micropores and chemical absorption by metal ions could be achieved simultaneously with the metal impregnated activated carbon because the capacity of micro pores did not change even after metal ions were impregnated.

• Tunnel and Underground Space
• /
• v.22 no.1
• /
• pp.32-42
• /
• 2012

It is very difficult to capture the weathering characteristics of rock because of limitation caused by time and space. A new scheme of experiment that includes physical and chemical weathering processes was implemented on Cretaceous granitic rock samples from Kimhae area to investigate the variations of geomechanical properties of deteriorated rocks due to artificial weathering processes. The seismic velocity was found to decrease with increasing artificial weathering cycle. Effective porosity and absorption tend to increase with artificial weathering processes. The amount of deterioration of rock samples depend on pre-test degree of weathering. Effective porosity, absorption and seismic velocity can be used as the measure of weathering characteristics of granite in the study area. Weathering is accelerated by combined effect of physical and chemical weathering processes. The new experimental methodology conducted in this study has strong capability to analyze the weathering characteristics of rocks.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.2
• /
• pp.109-117
• /
• 2001

This research was carried out to develop the Hanji(Korean paper) sludge wood particle composite utilizing the waste sludges occurring from the making process of Hanji(Korean paper). In the research, four mixing ratios of white or black sludge to wood particle(10:90, 20:80, 30:70, and 40:60), three types of the resin adhesives(PMDI, urea and phenol resin) and three levels of the densities(0.60, 0.75 and 0.90) were designed to investigate the physical properties of Hanji(Korean paper) sludge wood particle composite. The linear expansion of Hanji(Korean paper) sludge wood particle composite was not always increased, compared to control boards. For thickness swelling, PMDI-bonded composites had the lowest value, and thickness swelling of composite was generally decreased with the increase of Hanji sludge. The water absorption of white sludge wood particle composite had no tendency, hut that of black sludge wood particle composite was decreased with an increase of mixing ratio of Hanji sludge.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.17 no.3
• /
• pp.133-137
• /
• 2007

Ecological lightweight aggregates were made in order to recycle the dredged soils from the seaside construction area and the bottom ashes from the power plant. Various physical and chemical analysis were performed on them to identify their possibility for applying lightweight concrete fields. Lightweight aggregates were made of bottom ashes and dredged soils from Yongheung Island which is located 20km west away from Seoul, and all the raw materials were milled before mixing. The physical and chemical properties such as density, absorption rate, stability, alkali latency reaction, heavy metal leaching of the lightweight aggregates were tested and analysed by following the KS standard procedures. From the size analysis, the coarse aggregates showed a suitable fit on standard particle ranges; however, the fine aggregates showed a large deviation from the standard. The absorption rates were increased with decreasing weight of the aggregates. All the aggregates were turned out to be safe by the stability and heavy metal leaching test; however, some of the aggregates were confirmed on the border of harmless and possibly harmful region through the alkali latency reactivity test.

• Korean Chemical Engineering Research
• /
• v.49 no.1
• /
• pp.120-127
• /
• 2011

For the development of the environment-friendly insulating composite materials, natural cellulose (wood chip and sawdust) was used as a core material and activated Hwangtoh was used as a binder. Various specimens were prepared with the water/binder ratio and natural cellulose/binder ratio. The physical properties of these specimens were then investigated through compressive and flexural strength test, absorption test, hot water resistance test, thermal conductivity, measurement of pore distribution and observation of micro-structures using scanning electron microscope (SEM). Results showed that the absorption ratio increased with the increase of natural cellulose/binder ratio but decreased remarkably with the increase of polymer/binder ratio. The compressive and flexural strength development varied appreciably with the increase of water/binder ratio and natural cellulose/binder ratio. On the other hand, thermal conductivity decreased with the increase of natural cellulose/binder ratio and polymer/binder ratio. Through SEM, it was found that activated Hwangtoh that reacted with water formed a hydrate crystal leading to the compact structure and the total pore volume of the specimen using activated Hwangtoh was smaller than that of the non-activated Hwangtoh.

• International Journal of Highway Engineering
• /
• v.15 no.2
• /
• pp.65-71
• /
• 2013

PURPOSES : The objective of this study is to evaluate the effect of physical characteristics of emulsion asphalt and aggregate on performance of chip seal pavements. METHODS : In order to evaluate the performance of chip seal materials, the sweep tests and Vialit Plate Shock tests were conducted on the mixtures with five emulsion asphalt binders and three aggregate types. The sweep tests was intended to investigate the change of bonding properties between emulsion asphalt and aggregate with curing time. The Vialit Plate Shock test was used to evaluate the bonding properties of chip seal materials at low temperatures. RESULTS : Results from sweep tests showed that polymer modified emulsion asphalt can reduce the curing time by 1.5 hour comparing with typical emulsion asphalt. It is also found that the Flakiness Index of aggregates and absorption rate of binder are the major factors affecting the bonding properties of chip seal materials. The Vialit Plate Shock test results showed that the average aggregate loss of CRS-2 is ten times higher than CRS-2P No.2 indicating that the use of polymer additives in emulsion asphalt can improve the performance of chip seal materials in low temperature region. CONCLUSIONS : The use of polymer in emulsion asphalt can decrease the curing time of chip seal materials and increase the bonding properties between aggregates and asphalt binder. It is also concluded that the lower Flakiness Index and absorption rate of aggregates can improve the performance of chip seal pavement.