• 전기전자학회논문지
• /
• 제19권1호
• /
• pp.118-123
• /
• 2015

MPPT가 미적용된 기존 태양광 가로등은 최대 30%의 출력저하를 유발한다고 보고되고 있다. 본 논문에서는 이러한 출력 저하로부터 태양광발전시스템의 효율을 향상시키기 위해 다이렉트 듀티비 제어 알고리즘을 적용한 250W 태양광가로등을 위한 충전제어기를 제안하였으며, PWM 제어기와 전력 토폴로지를 다루고, MPPT 알고리즘을 분석하였다. 전력변환부는 푸쉬풀 강압 컨버터로 구성하고, PWM 제어기는 8비트 MCU를 기반으로 해서 제조 원가를 낮추도록 하였다. 다이렉트 듀티비 제어 알고리즘을 적용한 PWM 제어기는 태양광모듈의 최대전력점을 지속적으로 추적하여 출력 전력을 증가시킨다. 실험 결과, 241W 태양광시뮬레이터 환경에서 97.1~97.4%의 MPPT 효율을 나타내었으며, 실제 응용제품에 적용할 수 있을 것으로 예상된다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제51권3호
• /
• pp.142-149
• /
• 2002

As is well-known, the maximum power point (MPP) of PV power generation system depends on array temperature and solar insolation, it is necessary to track MPP of solar array all the time. Among various MPP control algorithms, the constant voltage control method, the perturbation and observation (P&O) method and the incremental conductance method (IncCond) have drawn many attractions due to the usefulness of each system. In this parer, the effectiveness of above mentioned three different control algorithms are thoroughly investigated via simulations and preposed efficiency evaluation method on experiment. Both the steady-state and transient characteristics of each control algorithms along with measured efficiency are analyzed, respectively. Finally, a novel MPPT control algorithm combining the constant voltage control and IncCond method for low insolation condition is proposed to improve efficiency of the 3KW PV power generation system.

• 조명전기설비학회논문지
• /
• 제21권9호
• /
• pp.25-31
• /
• 2007

In this paper, a novel MPPT(Maximum Power Point Tracking) algorithm for power of PV(Photovoltaic) systems is presented using a boost converter for a connected single phase inverter. On the basic principle of power generation for the PV(photovoltaic) module, the model of a PV system is presented. On the basis of this model, simulation of this PV system and algorithms for maximum power point tracking are described by utilizing a boost converter to adjust the output voltage of the PV module. Based on output power of a boost converter, single phase inverter uses predicted current control to control four IGBT#s switch in full bridge. Furthermore, a low cost control system for solar energy conversion using the DSP is developed, based on the boost converter to adjust the output voltage of the PV module. The effectiveness of the proposed inverter system is confirmed experimentally and by means of simulation. Finally, experimental results confirm the superior performance of the proposed method.

• 전력전자학회논문지
• /
• 제18권4호
• /
• pp.349-358
• /
• 2013

In this paper, the sensorless MPPT algorithm is proposed where the performance of varied duty ratio change has been improved using multi-layer neuro-fuzzy that aligns with neuro-fuzzy based optimized membership function. Since the change of duty ratio of sensorless MPPT is varied by using the neuro-fuzzy, the MPPT response speed is faster than the convectional method and is able to reduce the steady-state ripple. The neuro fuzzy controller has the response characteristics which is superior to the existing fuzzy controller, because of the usage of the optimal width of the fuzzy membership function. The effectiveness of the proposed method has been verified by simulations and experimental results.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.966-971
• /
• 1998

The studies on the photovoltaic system are extensively exhaustible and broadly available resourse as a future energy supply. In this paper, a new maximum power point tracker(MPPT) using neural network theory is proposed to improve energy conversion efficiency. The boost converter and neural network controller(NNC) were employed so that the operating point of solar cell was located at the Maximum Power Point. And the back propagation algorithm with one input layer of two inputs(E, CE) and output layer(cnntrol value) was applied to train a neural network. Simulation and experimental results show that the performance of NNC in MPPT of photovoltaic array is better than that of controller based upon the Hill Climbing Method.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.58-62
• /
• 2002

The MPPT methods is used to get the maximum energy from the limited size of a photovoltaic array. This study deals with the suitable MPPT method of solar lighting lamp and the improved charge and discharge characteristics. So we proposed the control algorithm for stand-alone photovoltaic array(SPVS). The result of experiment is presented the improved charge characteristics and the charge and discharge times reduction, the depth of discharge control. so, the system stabilization goes up. It is possible economical effect to apply for solar lighting lamp used photovoltaic array

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1386-1387
• /
• 2011

Maximum power point tracking(MPPT) techniques are used in photovoltaic systems to maximize the PV array output power by tracking continuously the maximum power point which depends on panels temperature and on irradiance conditions. In this paper, the controller of the stand-alone PV system applicable to various fields are designed. The improved P&O MPPT and traditional P&O MPPT method was applied. This improved algorithm consists of a constant perturbation with an step control which will make easier the controller PV power data acquisition process. This strategy of control has, in first time, been validated by PSIM simulations. After, been field test. The experimental results show that the improved P&O method increased the PV output power compare to traditional P&O method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.950-951
• /
• 2015

This paper proposes MPPT control considering temperature characteristic of PV module. Conventional CV(Constant Voltage) and PO(Perturbation and Observation) methods have the weak problem about the insolation and temperature change. Thus, in this paper, in order to improve this problem, the optimal voltage and current is determined and the MPPT control is performed. MPPT algorithm proposed in this paper analyze the performance about insolation and temperature change and proves the validity.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.600-602
• /
• 1996

The purpose of this paper is to develop a new maximum power point tracking(MPPT) using fuzzy set theory for air conditioning system. Fuzzy algorithm based on linguistic rules describing the operator's control strategy is applied to control step-up chopper for MPPT. Fuzzy algorithm is applied to control boost MPPT converter by temperature compensation effect with 8 bit single chip 8051 microcontroller. In this paper, temperature compensation(Becom Transducer : pf-T type) range is $-40^{\circ}C{\sim}+100^{\circ}C$.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1714-1716
• /
• 2005

본 논문은 독립형 시스템에 태양광을 집적하기위하여 최대출력점추적기를 적용한 새로운 제어방법을 제시한다. PV 판넬로부터 하나의 변수만을 시스템에 대한 제어변수로서 이용한다. 제안한 방법은 전압, 전류의 명확한 결과를 적용하지 않고 최대 전력점을 계산할 수 있다. 제안된 시스템에 대한 전력회로는 동기정류기를 가지는 승압형 컨버터이다.