• 통합자연과학논문집
• /
• 제3권1호
• /
• pp.33-37
• /
• 2010

The functionalized photonic crystals of porous silicon biosensor was prepared for the application as a label-free biosensor based on distributed Bragg reflector interferometer. Prepared distributed Bragg reflector of porous silicon biosensor displayed sharp reflection in the optical reflective spectra. The mean of construction of molecular architectures on distributed Bragg reflector of porous silicon surfaces was investigated for the step-by-step binding interaction with amines, biotin, avidin, and biotinylated protein A. The subsequent introduction of avidin, and biotinylated protein A resulted in the reflectivity shifted to longer wavelengths, indicative of a change in refractive indices induced by binding of biomolecules.

• 한국전자파학회논문지
• /
• 제12권4호
• /
• pp.611-621
• /
• 2001

본 논문에서는 포토닉 밴드갭(PBG)의 결합모드(defect-mode)를 이용한 대역통과 여파기를 구현하는 방법에 대해 연구하였다. PBG 구조를 구현하기위하여 마이크로스트립 라인의폭을 달리하면 PBG 셀(cell)을 형성한 후, 이들 셀들을 주기적으로 배열하였으며, PBG 구조 일부분의 주기를 변화시킬 경우에 발생하는 결함모드를 이용하여 저지대역 내에서 통과대역을 구현하였다. 또한, 집중정수소자(Iumped-element)를 이용하여 PBG 구조의 등가회를 구현하였다.

• Journal of Magnetics
• /
• 제20권2호
• /
• pp.110-113
• /
• 2015

Two kinds of magnetic fluids with different volume fractions are symmetrically filled into the W0.9 photonic crystal waveguide structure. The 2D plane-wave expansion method is used to investigate the slow light properties numerically. The constant group index criterion is employed to evaluate the slow light performance. The wavelength bandwidth ${\Delta}{\lambda}$ centering at ${\lambda}_0=1550nm$ varies from 32.4 to 44.2 nm when the magnetic field factor ${\alpha}_{\parallel}$ changes from 0 to 1. And the corresponding normalized delay bandwidth product can be tuned from 0.221 to 0.258. For comparison and optimization, two infiltration cases are investigated and the more advantageous infiltration scheme is found.

• The Korean Journal of Ceramics
• /
• 제6권4호
• /
• pp.408-411
• /
• 2000

Although the rotation angle and its spectrum of the magneto-optical Kerr effect are physical quantities determined inherently by the material itself, we found that they can widely be designed by utilizing a one-dimensional photonic crystal with a ferromagnetic defect layer. By suitable choice of the film structure, the rotation angle at a designated narrow wavelength is resonantly enhanced up to as several hundred times larger as ordinary rotation angle of the magnetic. This is originated by the localization of light at the magnetic layer inside the film.

• 한국전기전자재료학회논문지
• /
• 제23권2호
• /
• pp.128-132
• /
• 2010

Photonic crystal is dielectric materials or a set of different dielectric materials with periodic structure. Line defect is obtained by leaving out a row of rods along the $\Gamma$-X direction. We showed the change of group velocity in waveguide mode and found resultant small group velocity. Characteristics of the small group velocity were described by electric field distribution. Investigating the phase shift, it is confirmed if small group velocity is positive or negative.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2003년도 하계학술발표회
• /
• pp.164-165
• /
• 2003

A cholesteric liquid crystal (CLC) system exhibits one-dimensional (1-D) Photonic bandgap (PBG) characteristics in the transmission spectrum through a selective Bragg reflection. Related to the nonlinear optical (NLO) processes in a PBG structure of CLC, the inherent periodicity has been exploited to Phase-match the fundamental and the harmonic waves through the umklapp Processes. Near bandgap edges of a CLC, harmonic generations have been shown to be enhanced significantly through the field localization. (omitted)

• Journal of the Optical Society of Korea
• /
• 제19권1호
• /
• pp.63-68
• /
• 2015

A one-step fabrication of a photonic crystal (PC) with functional defects is demonstrated. Using multi-beam phase-controlled holographic lithography with a diffracting optical element, large area one dimensional (1D) and two dimensional (2D) PCs with periodic defects were fabricated. The uniform area is up to $2mm^2$, and tens of defect channels have been introduced in the 1D and 2D PC structure. This technique gives rise to substantial reduction in the fabrication complexity and significant improvement in the spatial accuracy of introducing functional defects in photonic crystals. This method can also be used to design and fabricate three dimensional (3D) PCs with periodic defects.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.402.1-402.1
• /
• 2014

Photonic force microscopy (PFM) is an optical tweezers-based scanning probe microscopy, which measures the forces in the range of fN to pN. The low stiffness leads proper to measure single molecular interaction. We introduce a novel photonic force microscopy to stably map various chemical properties as well as topographic information, utilizing weak molecular bond between probe and object's surface. First, we installed stable optical tweezers instrument, where an IR laser with 1064 nm wavelength was used as trapping source to reduce damage to biological sample. To manipulate trapped material, electric driven two-axis mirrors were used for x, y directional probe scanning and a piezo stage for z directional probe scanning. For resolution test, probe scans with vertical direction repeatedly at the same lateral position, where the vertical resolution is ~25 nm. To obtain the topography of surface which is etched glass, trapped bead scans 3-dimensionally and measures the contact position in each cycle. To acquire the chemical mapping, we design the DNA oligonucleotide pairs combining as a zipping structure, where one is attached at the surface of bead and other is arranged on surface. We measured the rupture force of molecular bonding to investigate chemical properties on the surface with various loading rate. We expect this system can realize a high-resolution multi-functional imaging technique able to acquire topographic map of objects and to distinguish difference of chemical properties between these objects simultaneously.

• 한국전기전자재료학회논문지
• /
• 제19권3호
• /
• pp.267-272
• /
• 2006

Optical waveguide based on symmetric and asymmetric Mach-Zehnder interferometer(MZI) type was designed, fabricated and measured the optical characteristics for the application of biosensor. The wavelength of the input optical signal for the device was 1550 nm. And the difference of refractive index was $0.45\;{\Delta}\%$ between core and cladding of the device. The TM(Transverse Magnetic) mode optical properties of the biosensor were analyzed with the refractive index variation of gold thin film deposited for overclad. Nowadays, nano-photonic crystal structures have been paied much attention for its high optical sensitivity. There is a technique to realize the structure, which is called Dip-Pen Nanolithography(DPN) process. The process requires a nano-scale process patterning resolution and high reliability. In this paper, two dimensional nano-photonic crystal array on the surface was proposed for improving the sensitivity of optical biosensor. And the Dip-Pen Nanolithogrphy process was investigated to realize it.

• Journal of Korean Vacuum Science & Technology
• /
• 제7권1호
• /
• pp.8-12
• /
• 2003

The effects of lattice strain on the magnetic and the transport properties of La$_{0.8}$Sr$_{0.2}$MnO$_3$films grown on a LaAlO$_3$ (001) substrate and on a La$_{0.8}$Sr$_{0.2}$MnO$_3$ layer have been studied. It was observed that the metal-insulator and the ferromagnetic transitions turn out to be at higher temperatures for the film deposited on La$_{0.8}$Sr$_{0.2}$MnO$_3$ layer with respect to that on LaAlO$_3$. The dependence of Curie temperature on the bulk and the Jahn-Teller strains has also been determined. determined.