• International journal of advanced smart convergence
• /
• v.11 no.2
• /
• pp.219-225
• /
• 2022

Recently, the popularization of personal mobility(PM) has made it possible to see many electric scooters. The energy source of personal transportation used by the general public and the disabled can be seen as environmentally friendly as electricity. Personal transportation means are divided into small electric vehicles because they use electric energy, and they are being treated as new models by automobile manufacturers in each country and spurring development. On the other hand, personal transportation means may cause various types of traffic accidents as they travel between roads and a human walk. In order to prevent such accidents, it is judged that the enactment of laws on the establishment of specifications for electric scooters, which are personal transportation means, and the method of restricting road operation should be given priority. The electric scooter is basically different from the conventional vehicle. The steering shaft of the steering system applied to the electric scooter one to two is possible. 1 to 2 the front-wheel under the steering column is used. It is classified according to the number of wheel installed at the electric scooter is the vehicle body into 2 wheel - electric scooter, and 3 wheel - electric scooter and 4 wheel - electric scooter. In this study, we propose a steering shaft design model that can be applied to an electric scooter, one of personal transportation means. A design model for 1-shaft steering and 2-shafts steering that can be applied to electric scooters is proposed. In addition, we have produced the prototypes for the commercialization of the proposed models, and reviewed the pros and cons of the manufactured prototypes and models.

• International journal of advanced smart convergence
• /
• v.8 no.2
• /
• pp.30-38
• /
• 2019

Recently, the spread of personal mobility has been rapidly increasing due to the development of environmentally friendly alternative transportation means. In addition, the level of battery technology is also rapidly developing, accelerating the popularization of personal mobility. Such personal mobility has convenience of location transfer, amusement, and high portability compared to other transportation devices. Most personal mobility, however, is made up of small wheels, which cannot overcome obstacles such as rugged roads or obstacles on the road. In this paper, to solve these problems, we tried to devise a device that can easily overcome obstacles by combining wheels with small moving means. The wheel size can be mounted on the front wheel of the small moving means in a protruding manner so that obstacles can be encountered before the front wheels and the safety and ride comfort of the running can be improved.

• Proceedings of the KIEE Conference
• /
• 2009.04b
• /
• pp.195-197
• /
• 2009

The role of environment-friendly and energy-efficient rail transportation is on the rise as a "sustainable transportation means" to cope with environmental changes that are major concerns around the world. Along with the environmental problems, the CO2 inhibition issue became critical for mankind to prepare global warming and high oil prices. It has come to a point where an alternate means are needed to revitalize plans including renewable energy, bicycle utilization, and prepare new solutions for decreasing number of cars within the city The personal rapid Transit(PRT) is the revolutionary future transportation means that can replace cars to deal with ever-increasing traffic congestions, vehicles, and environmental/energy problems. Expected as an efficient means, technology development has already taken place in developed countries such as U.S., England, and Germany. To meet the future demands, PRT installation around the nation's new and existing towns is being examined to produce important factors. The factors are produced for examining the availability of system requirements during design and construction practice.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.2 no.3
• /
• pp.356-360
• /
• 2013

The PRT (Personal Rapid Transit) system is a new transportation system in accordance with the requirements of the passengers. Although this PRT system was proposed a long time ago, it did not hold the limelight due to the several limitations in technology. However, the research and development has been active again recently thanks to the development in technology and the review on its applicability as the means of transportation linking to the urban transit system. Although most of these recent studies in relation to the PRT are focused on the hardware such as PRT vehicles or track structures, etc., the operational aspect of it is more important than that of any other means of public transportation. Therefore, among studies on operational aspect of this PRT system, this paper shows the result of study on technology in relation to the movement of vehicle to the station where it was called by the passenger through interface of the wayside control center with the vehicle control system in case where the passenger calls a vehicle at the station.

• Journal of Auto-vehicle Safety Association
• /
• v.12 no.1
• /
• pp.6-14
• /
• 2020

Personal mobility, which was used exclusively for leisure activities, has recently been used as a means of transportation, and it is expected to increase its role as the next generation transportation. Sales of personal mobility are increasing rapidly, but the problem is that traffic accidents are also increasing. In this study, human body injury caused by various collisions between electric wheel users and road users that occur on bicycle or pedestrian roads mainly used by personal mobility is analyzed through collision analysis and collision risk analysis. In the case of the collision accident for electric wheel, it is analyzed that the road users are more likely to be injured on the pedestrian road than the bicycle road. In addition, the head hit each other or fall and hit the floor caused severe head injury.

• International Journal of Internet, Broadcasting and Communication
• /
• v.14 no.1
• /
• pp.201-208
• /
• 2022

As around the world, ground and underground transportation capacity is reaching its limit, centering on urban areas. As urban traffic becomes congested, time and cost are astronomical, and environmental destruction caused by urban pollution is becoming increasingly serious. As a way to solve this problem, the means of flying over the air are in the spotlight as the next generation of future transportation, and the concept of urban air mobility (UAM, Urban Air Mobility) is defined as systematic planning. The development of an electric-powered vertical take-off (eVTOL) aircraft that obtains electric power through a battery using a personal aerial vehicle (PAV) as a means of transportation has accelerated. As the aircraft development of new technology aircraft in the evtol method is actively carried out, the need to prepare systems such as aircraft certification standards, pilot qualification systems, and qualification management is emerging. The Federal Aviation Administration (FAA) and the European Union Aviation Safety Agency (EASA), which lead international standards, announced new special technical conditions and temporary regulations SCVTOL-01, respectively. However, the pilot qualification system for operating the uam aircraft has not yet been clearly announced. Therefore, this paper analyzes the recently announced FAA regulations and EASA regulations to identify differences and directions in perspectives on UAMs and study the existing vertical take-off and landing aircraft (VTOL) pilot qualification system to present directions for qualification classification.

• Proceedings of the KSR Conference
• /
• 2002.05a
• /
• pp.94-99
• /
• 2002

The traffic policy of a city in Korea has brought to many traffic problems by putting emphasis on the only side of mobility in the past that the personal transportation was put first in importance more than the public transportation. As the result of this policy, in the process that the traffic policy of large cities in Korea changes into accessibility, it is shown for re-lighting up the development of the public transportation to be going to be able to get many suggestions in searching for the desirable developing direction of the new means of transportation that will arrive at Korea in the future. Especially, compared with the policy of U.S.A. on the traffic plan that has concentrated on the road and the vehicle, and that of Europe that has put first in the walking and the public transportation system, it is considered as an important thing that the lesson is given to us about what is important for the desirable city development. Transportation can be divided into four; a railroad transportation. a road transportation, a marine transportation, and an aerial transportation.

• Journal of Drive and Control
• /
• v.18 no.4
• /
• pp.35-42
• /
• 2021

A personal mobility withstanding function for the disabled and vulnerable groups with difficulties in mobility was developed and structural and dynamics analysis was conducted. Personal mobility devices are a very helpful means of transportation for the disabled and vulnerable groups. In addition, the standing function allows individuals to perform a difficult task in while seated and offers a medical advantage to the user. In this study, a personal mobility device was designed and developed to help vulnerable groups and disabled people overcome limited mobility, and communicate with the general people at eye level through standing functions. Through structural and dynamic analysis, the structural safety, optimal speed during rotation, and lateral acceleration of the personal mobility device was analyzed. The analysis results are expected to contribute to the improvement of the users' convenience and stability of personal mobility.

• Industry Promotion Research
• /
• v.9 no.1
• /
• pp.47-55
• /
• 2024

In the transportation sector, reducing total vehicle mileage and passenger vehicle traffic are proposed as strategies to achieve carbon neutrality. To achieve this, MaaS services must be actively promoted with the goal of revitalizing public transportation. In order to promote MaaS, individual movement data is required, such as the individual's means of movement, route, and conversion of the individual's means of use. However, in Korea, there are legal limitations in collecting and utilizing data on individual movements. As the right to request transmission of personal information was newly established in the revised Personal Information Protection Act in 2023, a law was established to collect and utilize data on individual movements. However, enforcement ordinance, detailed rules, instructions, guidelines must be prepared, and the standardization of data format and transmission system for collecting my data needs to take precedence.

• Journal of the Korea Convergence Society
• /
• v.11 no.12
• /
• pp.147-153
• /
• 2020

This study is aimed at a basic infrastructure for realizing urban air mobility (UAM) and personal air vehicle (PAV), which have recently been high interest as new means of transportation. The development of UAM and PAV technologies is a field of a high added value that the world is competitively pushing for the world. However, the three most fundamental aspects are the establishing an aviation certification system, finding reliable manufacturers having advanced technical abilities, and the training/securing of professional manpower. Above all, the aviation certification system will be established for the first time. Based on the certification system, it will be possible to realize the government's policy goal of introducing new means of transportation, including the production of aircraft and to realize commercialization that meets international standards that satisfy conformity and compliance. In addition, finding reliable manufacturers, fostering professionals, and establishing an educating system for stable supplying of the professionals are main projects to become a leading country in the field.