• Journal of Korean Neurosurgical Society
• /
• v.29 no.5
• /
• pp.644-649
• /
• 2000

Objective : Acute hydrocephalus can be caused by many pathologic conditions such as sub- arachnoid hemorrhage, intraventricular hemorrhage, inflammatory diseases. External ventricular drainage(EVD) through trephination of the skull is essential procedure for progressing or persistent symptomatic acute hydrocephalus. If the EVD can not be removed in short period, the chance of ventriculitis increases and periodic transposition of the draining catheter should be considered. Shunt procedure can not be performed in acute hemorrhage or infectious condition because of the risk of shunt malfunction or intra-abdominal spreading of the infection, respectively. The authors replaced EVD with continuous lumbar drainage(CLD) for the purpose of controlling acute hydrocephalus and preventing ventriculitis simultaneously, or treating ventriculitis more effectively in case of infection which had already broken out. CLD has many advantages over EVD, although, it can complicate disastrous downward brain herniation in patients with elevated intracranial pressure. The authors performed CLD with EVD maintained and then tested the possibility of the brain herniation with quite simple method. If the CLD was proven as safe through the test, EVD could be replaced with it without terrible herniation. Material and Method : Between September 1998 and April 1999, 10 patients underwent CLD in replacement of EVD. Among them, 5 were patients with aneurysmal subarachnoid hemorrhage, 2 were patients with thalamic hematoma and intraventricular hemorhage and 3 were patients with traumatic intracranial hemorrhage. Results : In eight of them the replacements were successfully done and one of them died on account of medical illness. In two of them the replacement could not be performed because of the risk of herniation and all expired owing to ventriculitis. Two patients required permanent shunt operation. Conclusion : This article provides a valuable alternative method of treatment for persistent symptomatic hydrocephalus which can not be managed with shunt operation immediately.

• Journal of Conservation Science
• /
• v.31 no.4
• /
• pp.387-393
• /
• 2015

Damages of wooden cultural heritages caused by various bio-species have been a trend that is increasing on climate change. The decay and bio-damage caused by microbial organisms or insect species are also known to factors of the shape changes and structural problems of wooden cultural heritages. There are so many phenomenons of damage and weathering in wooden cultural heritage for many years and particularly termite can threaten seriously wooden cultural heritage. We investigated with respect to internal and external environment and termite inhabitation around the wooden cultural heritage in Jeollanam-do, Jeollabuk-do, and Jeju-do. As this investigation results, we confirmed that there were the difference in between resident and non-resident about temperature, humidity, moisture contents of wooden building. Resident building is high temperature but humidity and moisture contents is low and these factors are sources of inhabitation condition change about insects as termites. Now we suggest to carry out in parallel to the target wooden cultural heritage and the surrounding habitat for wooden cultural heritage termite damage investigation. Also with the chemical control methods, we must consider necessary to present eco-friendly control management such as construction of heating facilities, residential status, periodic management.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.44 no.3
• /
• pp.378-383
• /
• 2017

There are many reasons for tooth discoloration. An increase in the bilirubin level may cause tooth discolorations. Such cases are rare, but most involve tooth discoloration with a greenish hue. The purpose of this case report is to describe green discoloration of the primary dentition in the presence of neonatal hyperbilirubinemia. 2 boys aged 16 and 22-months presented with chief complaints of erupting teeth of abnormal color. Their primary teeth exhibited a greenish discoloration along enamel hypoplasia. Both patients were born prematurely with a low birth weight and had been diagnosed with neonatal hyperbilirubinemia. Systematic diseases can affect the hard tissue of teeth during their formation and result in changes in tooth color. Periodic follow-ups are required for establishing a normal dental condition and meeting the esthetic needs of patients. A pediatric dentist may be the first person to observe patients with discoloration in their primary dentition. In such cases the dentist can deduce the systematic disease responsible for this discoloration.

• Journal of Bio-Environment Control
• /
• v.26 no.4
• /
• pp.258-267
• /
• 2017

The price competitiveness of photovoltaic system (PV system) has risen recently due to the growth of industries, however, it is rarely applied to the greenhouse compared to other renewable energy. In order to evaluate the application of PV system in the greenhouse, power generation and optimal installation area of PV panels should be analyzed. For this purpose, the prediction of the heating and cooling loads of the greenhouse is necessary at first. Therefore, periodic and maximum energy loads of a multi-span greenhouse were estimated using Building Energy Simulation(BES) and optimal installation area of PV panels was derived in this study. 5 parameter equivalent circuit model was applied to analyzed power generation of PV system under different installation angle and the optimal installation condition of the PV system was derived. As a result of the energy simulation, the average cooling load and heating load of the greenhouse were 627,516MJ and 1,652,050MJ respectively when the ventilation rate was $60AE{\cdot}hr^{-1}$. The highest electric power production of the PV system was generated when the installation angle was set to $30^{\circ}$. Also, adjustable PV system produced about 6% more electric power than the fixed PV system. Optimal installation area of the PV panels was derived with consideration of the estimated energy loads. As a result, optimal installation area of PV panels for fixed PV system and adjustable PV system were $521m^2$ and $494m^2$ respectively.

• Tunnel and Underground Space
• /
• v.23 no.5
• /
• pp.442-453
• /
• 2013

A large-scale high-temperature thermal energy storage(TES) was numerically modeled and the heat loss through storage tank walls was analyzed using a commercial code, FLAC3D. The operations of rock cavern type and above-ground type thermal energy storages with identical operating condition were simulated for a period of five consecutive years, in which it was assumed that the dominant heat transfer mechanism would be conduction in massive rock for the former and convection in the atmosphere for the latter. The variation of storage temperature resulting from periodic charging and discharging of thermal energy was considered in each simulation, and the effect of insulation thickness on the characteristics of heat loss was also examined. A comparison of the simulation results of different storage models presented that the heat loss rate of above-ground type TES was maintained constant over the operation period, while that of rock cavern type TES decreased rapidly in the early operation stage and tended to converge towards a certain value. The decrease in heat loss rate of rock cavern type TES can be attributed to the reduction in heat flux through storage tank walls followed by increase in surrounding rock mass temperature. The amount of cumulative heat loss from rock cavern type TES over a period of five-year operation was 72.7% of that from above-ground type TES. The heat loss rate of rock cavern type obtained in long-period operation showed less sensitive variations to insulation thickness than that of above-ground type TES.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.6
• /
• pp.1-12
• /
• 2012

This study aims to suggest ways to improve sustainability on housing complexes. This study sampled eight housing projects in Seoul and GyeongGi-Do in Korea, which were completed in June 2007 and June 2008. Then, are retention and maintenance on "constructed greens for ecological environment" including "green structures substitutes retaining walls", "green roofs", and "green walls." Study methods are field investigations of the sampled sites, and Post Occupancy Analysis. Major findings were; 1) "constructed greens" are not well retained in more sites and and this implies the GBCS(Green Building Certification System) does not meet its objectives well, 2) User showed lower user satisfaction to "constructed greens". User satisfaction concerning "green structures substitute retaining walls" was higher than the satisfaction on the other constructed green type. Satisfaction Assessment Criteria lower 1han average were "level of quality", "meet the design objectives", "vegetation management status", "vegetation maintenance". 3) User satisfaction was strongly correlated on the level of quality factor of "constructed green". In addition, tue other factors are the significant correlations between the satisfactions. The present GBCS has inadequate assessment standards for maintenance, which lead to lower the entire satisfaction. Therefore, periodic recertification system, education and information providing for the managing personals, and incentives for good maintenance or disincentive for poor maintenance of the "constructed greens" are suggested to improve the GBCS.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.12
• /
• pp.1193-1199
• /
• 2012

A cup burner experiment was performed to investigate the effect of the oxidizer velocity and concentration on flame instability near extinction. Heptane was used as a fuel and air diluted by nitrogen and carbon dioxide was used in the oxidizer stream. Two types of flame instabilities at the flame base and at axial downstream were observed near extinction. The instability at the flame base could be characterized by cell, swing, and rotation modes, and the cell mode changed to the rotation mode through the swing mode as the oxidizer velocity increased. To assess the parameters for the flame instability, the initial mixture strengths, Lewis number, and adiabatic flame temperature were investigated under each condition. The Lewis number might be the most important among them, but it is impossible to generalize because of the insufficient number of cases. Furthermore, the axial periodic flickering motion disappeared at low and high oxidizer velocities near extinction. This resulted from the fact that low oxidizer velocity induced evaporated fuel velocity below the critical velocity and high velocity made the reacting fuel velocity comparable.

• Journal of radiological science and technology
• /
• v.38 no.4
• /
• pp.355-363
• /
• 2015

Advancement in the medical field provides an opportunity for the development of medical equipment and also enable accurate diagnosis for the inspection and the treatment of diseases. The aging of equipment due to the frequent operation produce uncertainty in the patient exposure dose, so a quality control was implemented by establishing a safety management system on a regular basis. The x-ray tube voltage (kVp), which is directly involved in the patient exposure dose and the life of the equipment, needs periodic performance for the quality control, but it has a limitation due to the time and the cost. In this study, we proposed a new method for measuring the kVp with ease by using the Y and Cu to solve the problem of the time and cost. We also evaluated the usefulness and the effectiveness of the new method and its accuracy through the kVp measurement. After securing the condition, the amount of the tube current and evaluating the usefulness and effectiveness of kVp measured using Y and Cu. The density range used was at 0.5-1.0, kVp was in the range of ${\pm}10%$, then, we recorded the change in concentration as % of Y and Cu. This experiment showed that when Cu and Y was at 75 kVp, concentration was the same, and when the kVp was changed to 65 ~ 85 %, a gradual increase in concentration to 85 ~ 110 % was noted.

• Journal of Veterinary Clinics
• /
• v.21 no.4
• /
• pp.402-405
• /
• 2004

A 5-year-old Rottweiler neutered female dog was presented with signs of mandibular and popliteal lymphadenopathy, erosion in mucocutaneous junction of muzzle and lips, multiple papules and nodules in right rear limb and neck, and alopecia in right thorax. There was no further clinical sign except anorexia, sporadic fever and ocular hyperemia. She hadn't shown any response to carprofen prescribed by local veterinarian. Hematological abnormalities included mild anemia and severe lymphocytosis. On serum biochemical profile, only elevated AST level was noticed. On cytological examination, there was an evidence of mild bacterial infection which seemed to occur secondarily. Three sites were biopsied that included muzzle, upper lip and right thoracic region. Histopathologically, multifocal confluent pyogranulomatous dermatitis, scattered granulomatous inflammation in subcutis and severe septal panniculitis were observed. Special stainings(Gram, Acid-fast, PAS, Giemsa) were performed to reveal that a dog was negative for any organism. Finally, sterile pyogranuloma/granuloma syndrome (SPGS) was diagnosed. The treatment was initiated with predinsolone and enrofloxacin. The condition was successfully resolved after 4 weeks of treatment. This good response suggests that SPGS may be immune-mediated disease of its pathogenesis and this drug combination may be a viable therapeutic option for dogs suffering from SPGS. Also, this article reports a case of SPGS in Rottweiller for the first time.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.4
• /
• pp.629-637
• /
• 2000

A two-phase anaerobic reactor with a submerged microfiltration system was tested for its ability to produce methane energy from organic wastewater. A membrane separation system with periodic backwashing with compressed air was submerged in the acidogenic reactor. The cartridge type of microfiltration (MF) membrane with pore size of $0.5{\mu}m$ (mixed esters of cellulose) was tested. An AUBF (Anaerobic Upflow Sludge Bed Filter: 1/2 packed with plastic media) was used for the methanogenic reactor. Soluble starch was used as a substrate. The COD removal was investigated for various organic loading with synthetic wastewater of 5,000 mg starch/L. When the hydraulic retention time (HRT) of the acidogenic reactor was changed from 10 to 4.5 days, the organic loading rate (OLR) varied from 0.5 to $1.0kg\;COD/m^3-day$. When the HRT of the methanogenic reactor was changed from 2.8 to 0.5 days, the OLR varied from 0.8 to $5.8kg\;COD/m^3-day$. The acid conversion rate of the acidogenic reactor was over 80% in the 4~5 days of HRT. The overall COD removal efficiency of the methanogenic reactor showed over 95% (effluent COD was below 300 mg/L) under the highly fluctuating organic loading condition. A two-phase anaerobic reactor showed an excellent acid conversion rate from organic wastewater due to the higher biomass concentration than the conventional system. A methanogenic reactor combined with sludge bed and filter, showed an efficient COD and SS removal.