• Polymer(Korea)
• /
• v.38 no.4
• /
• pp.544-549
• /
• 2014

Double layered film consisting of polyimide/polysiloxane and interface with nano domain structure was fabricated through stepwise layer formation and subsequent aging steps. During aging of film, nano phase separation occurred between the top layer polysiloxane and the upper layer of polyimide, which was observed by transmission electron microscope (TEM). A stable and uniform polysiloxane layer was obtained, showing the reproducible pressure-sensitive adhesion (PSA) property with the peel strength of 8-13 g/inch at even $300^{\circ}C$. In addition, the resulting polymide/polysiloxane film was thermo-stable up to $435^{\circ}C$, providing the promising properties suitable for application in microelectronics processing.

• Nuclear Engineering and Technology
• /
• v.6 no.4
• /
• pp.219-230
• /
• 1974

The previous expression for the diffracted neutron intensity by a highly oriented polycrystalline is modified using the Kunitomi's formula of the crystal reflectivity The method of studying the preferred orientation in metals with white neutron is proposed utilizing the above formula and the fact that the real position of the diffraction of certain grain in the sample can be found by the comparison of the smaller angle part of the maxwellian curve of the calculated intensity of neutrons diffracted and the experimenal curves. The most probable wavelength of thermal neutrons from the reactor is found by the measurement of the neutron spectrum with the correction for the crystal about the multiple reflection and the absorption of neutrons and turned out to be 1.025 $\pm$ 0.001$\AA$. The preferred orientations of some electric steel sheets, mostly with the cube-on-face orientations, are investigated by the present method. The orientations of most grains relative to the rolling directions are found to be within 5 degrees. It is found the most of theories for large crystals may be extended to highly oriented polycrystalline materials without extensive modification.

• Food Science and Preservation
• /
• v.7 no.2
• /
• pp.133-138
• /
• 2000

The research was conducted to measure the effect of temperature on respiratory and quality characteristics of 'Tsugaru' apple(Malus domestica Borkh) during storage at 4$^{\circ}$C, 10$^{\circ}$C and 20$^{\circ}$C. Respiration rate of the apple just after harvest was 7.57 mL CO$_2$/kg/h at 20$^{\circ}$C. It was decreased rapidly and was 2.86 mL CO$_2$/kg/h after storage for 45 days at 20$^{\circ}$C. The apples showed the highest ethylene production rate at 10$^{\circ}$C and 20$^{\circ}$C after 14 days, and at 4$^{\circ}$C after 28 days during storage. Weight of the apple was reduced by 2.9% after 120 days at 4$^{\circ}$C and by 6.1% after 45 days at 20$^{\circ}$C. Color difference of peel and pH increased with the temperatures but titratable acidity and flesh firmness showed the reverse trends during storage. According to the subjective quality test, it could be suggested that the shelf-life of the apple is 86 days at 4$^{\circ}$C, 65 days at 10$^{\circ}$C and 37 days at 20$^{\circ}$C, respectively.

• Korean Journal of Plant Resources
• /
• v.23 no.5
• /
• pp.451-457
• /
• 2010

In order to elucidate the antioxidant potential of non-edible parts of oriental melon, antioxidant activities and total phenolic compound contents of six samples including peel, placenta, stem leaf, flesh and seed were determined. Antioxidant activities were evaluated using in vitro DPPH, ABTS, FRAP, and SOD assay. Among non-edible parts of oriental melon, stalk showed the highest antioxidant activity and its antioxidant potential increased significantly in a dose-dependent manner. The contents of total phenolic compound were also higher than other parts. The relationship between antioxidant activities and the contents of total phenolic compound were analyzed and showed higher correlation coefficients between ABTS radical scavenging activity and contents of total phenolic compound. The above results suggest that the stalk of oriental melon may have potential as a good source for functional material.

• Corrosion Science and Technology
• /
• v.12 no.6
• /
• pp.274-279
• /
• 2013

Flow accelerated corrosion (FAC) of the carbon steel piping in nuclear power plants (NPPs) has been major issue in nuclear industry. During the FAC, a protective oxide layer on carbon steel dissolves into flowing water leading to a thinning of the oxide layer and accelerating corrosion of base material. As a result, severe failures may occur in the piping and equipment of NPPs. Effect of alloying elements on FAC of pipe materials was studied with rotating cylinder FAC test facility at $150^{\circ}C$ and at flow velocity of 4m/s. The facility is equipped with on line monitoring of pH, conductivity, dissolved oxygen(DO) and temperature. Test solution was the demineralized water, and DO concentration was less than 1 ppb. Surface appearance of A 106 Gr. B which is used widely in secondary pipe in NPPs showed orange peel appearance, typical appearance of FAC. The materials with Cr content higher than 0.17wt.% showed pit. The pit is thought to early degradation mode of FAC. The corrosion product within the pit was enriched with Cr, Mo, Cu, Ni and S. But S was not detected in SA336 F22V with 2.25wt.% Cr. The enrichment of Cr and Mo seemed to be related with low, solubility of Cr and Mo compared to Fe. Measured FAC rate was compared with Ducreaux's relationship and showed slightly lower FAC rate than Ducreaux's relationship.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.7
• /
• pp.427-431
• /
• 2017

In this paper, we discuss ${\beta}-Ga_2O_3$ thin films that have been grown on freestanding GaN (FS-GaN) using furnace oxidation. A GaN template was grown by horizontalhydride vapor phase epitaxy (HVPE), and FS-GaN was fabricated using the laser lift off (LLO) system. To obtain ${\beta}-Ga_2O_3$ thin film, FS-GaN was oxidized at $900{\sim}1,100^{\circ}C$. Surface and cross-section of prepared ${\beta}-Ga_2O_3$ thin films were observed by field emission scanning electron microscopy (FE-SEM). The single crystal FS-GaNs were changed to poly-crystal ${\beta}-Ga_2O_3$. The oxidized ${\beta}-Ga_2O_3$ thin film at $1,100^{\circ}C$ was peel off from FS-GaN. Next, oxidation of FS-GaNwas investigated for 0.5~12 hours with variation of the oxidation time. The thicknesses of ${\beta}-Ga_2O_3$ thin films were measured from 100 nm to 1,200 nm. Moreover, the 2-theta XRD result indicated that (-201), (-402), and (-603) peaks were confirmed. The intensity of peaks was increased with increased oxidation time. The ${\beta}-Ga_2O_3$ thin film was generated to oxidize FS-GaN.

• Journal of the Microelectronics and Packaging Society
• /
• v.15 no.2
• /
• pp.7-15
• /
• 2008

In this paper, the Chip-On-Flex (COF) assembly process using anisotropic conductive films (ACFs) was investigated and the reliability of COF assemblies using ACFs was evaluated. Thermo-mechanical properties of ACFs such as coefficient of thermal expansion (CTE), storage modulus (E'), and glass transition temperature $(T_g)$ were measured to investigate the effects of ACF material properties on the reliability of COF assemblies using ACFs. In addition, the bonding conditions for COF assemblies using ACFs such as time, temperature, and pressure were optimized. After the COF assemblies using ACFs were fabricated with optimized bonding conditions, reliability tests were then carried out. According to the reliability test results, COF assemblies using the ACF which had lower CTE and higher $T_g$ showed better thermal cycling reliability. Consequently, thermo-mechanical properties of ACFs, especially $T_g$, should be improved for high thermal cycling reliability of COF assemblies using ACFs for compact camera module (CCM) applications.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.10
• /
• pp.113-123
• /
• 1990

Tungsten film was deposited on the single crystal silicon wafer in a low pressure chemical vapor deposition reactor from silane and tungsten hexafluoride in the temperature range of $250-400^{\circ}C$ Deposition rate was found to be determined by the mass transfer rate of reactants from the gas phase to the safter surface. It was found out that tungsten films deposited contained about 3 atomic $\%$ of silicon and that the crystallinity and the grain size increased as the deposition temperature was increased. The resistivity of the film was measured to be in the range of $7~25{\mu}{\Omega}-cm$ and decreased with increasing deposition temperature. The adhesion of the tungsten film on a silicon surface was measured by the tape peel off test and it was improved with increasing deposition temperature. From the analysis of the gas composition, the reaction pathway to form $SiF_{4}$ and $H_{2}$ was found to be more favorable than HF formation.

• Journal of Radiation Protection and Research
• /
• v.11 no.2
• /
• pp.139-145
• /
• 1986

An improved mothod of assessing fuel status by analyzsis of the fission product in the reactor coolant system is proposed. The release mechanism of specific fission products is established for determination of the coefficients in the equations which relate the radioactivities with the amount of defected fuel. Knock-out and migration models are employed in the formulation of the release mechanism. The influence of the tramp uranium is quantified. Sample calculations were made for KNU 1 reactor system using the I-131 and I-133 concentrations in the primary coolant. The estimated number of defected fuel pins in the third and sixth cycles appeared to be $9.34{\pm}1.13\;and\;0.294{\pm}0.092$, respectively.

• Preventive Nutrition and Food Science
• /
• v.16 no.4
• /
• pp.333-338
• /
• 2011

In this study, antioxidative and anti-inflammatory activities of the herb (cinnamon, clove, glehnia root, ginger, violet-root cromwell, licorice, citrus peel and longan) extracts used for gamhongroju, one of the popular liqueurs in Korea, were investigated. Twenty grams of individual herbs were extracted in 60% purified ethanol and freeze-dried. A mixture of the individual herb extracts (HEM) was separately prepared. Cytotoxicity of the individual extracts and HEM on murine RAW264.7 macrophage cells were examined along with their recovering activity on $H_2O_2$-treated RAW264.7 cells. Antioxidant and anti-inflammatory activities of the extract-treated cells were determined by measuring superoxide dismutase (SOD) and glutathione peroxidase (GPx) activities, and Trolox equivalent antioxidant capacity (TEAC), nitric oxide (NO) and prostaglandin E2 (PGE2) levels. Violet-root cromwell extract showed the least cytotoxicity in terms of treated concentration. Most of the extracts, below levels of cytotoxicity, recovered the $H_2O_2$-treated cells. Treatment with some of the extracts increased SOD and GPx activities and TEAC levels while a majority inhibited the production of NO and PGE2 in lipopolysaccharide (LPS)-treated cells.