• Journal of Mechanical Science and Technology
• /
• v.19 no.12
• /
• pp.2289-2295
• /
• 2005

Two-Phase flow pattern and pressure drop data were obtained for pure refrigerants R134a and R123 and their mixtures as test fluids in a horizontal tube. The flow pattern is observed through tubular sight glasses located at inlet and outlet of the test section. The flow map of Baker developed for air-water two-phase flow at atmospheric pressure failed to predict the observed flow patterns at the higher value of the mass velocity used in the present study. The map of Kattan et al. predicted the data well over the entire region of mass velocity selected in the present study. The measured pressure drop increased with an increase in vapor quality and mass velocity. A new two-phase multiplier was developed from a dimensional analysis of the frictional pressure drop data measured in the present experiment. This new multiplier was found successfully to correlate the frictional pressure drop.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.24 no.3
• /
• pp.321-330
• /
• 2020

Data classification and clustering is one of the most common applications of the machine learning. In this paper, we aim to provide the insight of the classification for Turing pattern image, which has high nonlinearity, with feature engineering using the machine learning without a multi-layered algorithm. For a given image data X whose fixel values are defined in [-1, 1], X - X³ and ∇X would be more meaningful feature than X to represent the interface and bulk region for a complex pattern image data. Therefore, we use X - X³ and ∇X in the neural network and clustering algorithm to classification. The results validate the feasibility of the proposed approach.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.5
• /
• pp.488-492
• /
• 2001

As gas chromatography/infrared spectrometry (GC/IR) becomes routinely avaliable, methods must be developed to deal with the large amount of data produced. We demonstrate computer methods that quickly search through a large data file, locating thos e spectra that display a spectral feature of interest. Based on a modified library search routine, these selective data reduction methods retrieve all or nearly all of the compounds of interest, while rejecting the vast majority of unrelated compounds. To overcome the shifting problem of IR spectra, a search method of moving the average pattern was designed. In this moving pattern search, the average pattern of a particular functional group was not held stationary, but was allowed to be moved a little bit right and left.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• fall
• /
• pp.144-145
• /
• 2021

Variable range of focal length of Moiré lens is designed to change the phase pattern, which is varifocal lens system using two thin layers with Moiré pattern and suitable to applied to AR/VR system because of the relatively simple structure, large aperture size, and wide variable range. We analyze the change of focal length region according to the phase pattern and verify the design to make the prototype patterns using DOE.

• Korea journal of population studies
• /
• v.8 no.2
• /
• pp.46-67
• /
• 1985

In this paper, an attempt has been made to examine the pattern of mortality in Korea during 1970~80. By applying the age-sex specific mortality rates quoted from 1978~79 life tables for Korea published by NBOS, EPB to those of the West pattern of regional model life tables and the far eastern pattern of model life tables for developing countries, life expectancy at birth were calculated. Also the author reviewed the trends of death rates, life expectancy and cause of death using vital registration data and other materials. Summarized results are as follows; 1. Crude death rates in Korea was reduced to one fifth in the 1983 compared to that in 1920's. Life expectancy also improved to almost double in 1985 compared to 1920's. But the difference in the life expectancy between male and female increased during that period and it was recorded as 6.4 years in 1985. This discrepancy was mainly due to the different tempo of decreasing in mortality level by sex, particularly, for the age 40 and above. 2. For the pattern of mortality in Korea, it showed that female mortality could accounted closer to the West pattern model life tables. There were high similarity between actual pattern prevalent in Korea and West pattern. And its coefficient of variance was also very low. However for the case of male, it was difficult to find the exact model life tables for explaining the actual situation on the male mortality pattern which means exist considerable dissimilarity in older ages. The Far eastern pattern of U.N. model life tables show better results than West pattern, however, the deviation of the pattern to actual was severe. Also in Far eastern pattern, high coefficient of variance was existed. Furthermore it was found in the paper that the mortality level of Korean male for the age 40 and above were much higher than that of Far eastern pattern which was reflected the high mortality of the male adult in Far east region. 3. The analysis of cause of death showed that circulatory disease such as cerebrovascular disease and hypertensive disease accounted for the leading cause of death in Korea for the age 40 and above. There should he paid special attention to chronic retrogressive diseases for the older age groups. For younger age groups, injury and poisoning were reported as important cause of death.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.11
• /
• pp.1867-1871
• /
• 1989

One of the most common problems in pattern recognition and image processing is filling the interior of a region when its contour is given. The existing algorithms of the filling are parity check technique, seeding technique, and technique based on chain coding the boundaries. In this paper, a very simple but effective technique for filling the interior of bounded region is proposed. This algorithm is based on the information of binary-coded boundary direction and covers some of the drawbacks reported in the earlier relevant works.

• Journal of Embryo Transfer
• /
• v.26 no.1
• /
• pp.79-84
• /
• 2011

This study was performed to identify the differentially methylated region (DMR) and to examine the mRNA expression of the imprinted H19 gene in day 35 of SCNT pig fetuses. The fetus and placenta at day 35 of gestation fetuses after natural mating (Control) or of cloned pig by somatic cell nuclear transfer (SCNT) were isolated from a uterus. To investigate the mRNA expression and methylation patterns of H19 gene, tissues from fetal liver and placenta including endometrial and extraembryonic tissues were collected. The mRNA expression was evaluated by real-time PCR and methylation pattern was analyzed by bisulfite sequencing method. Bisulfite analyses demonstrated that the differentially methylated region (DMR) was located between -1694 bp to -1338 bp upstream from translation start site of the H19 gene. H19 DMR (-1694 bp to -1338 bp) exhibits a normal mono allelic methylation pattern, and heavily methylated in sperm, but not in oocyte. In contrast to these finding, the analysis of the endometrium and/or extraembryonic tissues from SCNT embryos revealed a complex methylation pattern. The DNA methylation status of DMR Region In porcine H19 gene upstream was hypo methylated in SCNT tissues but hypermethylated in control tissues. Furthermore, the mRNA expression of H19 gene in liver, endometrium, and extraembryonic tissues was significantly higher in SCNT than those of control (p<0.05). These results suggest that the aberrant mRNA expression and the abnormal methylation pattern of imprinted H19 gene might be closely related to the inadequate fetal development of a cloned fetus, contributing to the low efficiency of genomic reprogramming.

• Journal of the Korean Regional Science Association
• /
• v.6 no.2
• /
• pp.123-147
• /
• 1990

This paper examines the changing geography of producer service industries in the 1980s. The foci of this study are to analyze the regional distribution of each producer services, and to reveal the spatial linkage of producer services. Further this paper asserts the potential role of producer services for reducing the potential endogenous development in the periphery. During the 1981-86 period, producer service industries grew more rapidly than other service sectors and manufacturing sector. The main reason of the raid growth of producer services is attributable to an increase in demand for intermediate services from manufacturing firms. In order to compete an increasingly complex business environment, firms have expanded the amount of effort devoted to activities such as planning, coordination and control, and consequently have increased their use of producer services. The most distinctive feature of the location of producer services is spatial concentration into Seoul and surrounding region. Especially the degree of the concentration o business services into the Capital Region has been accelerating during the 1990s. The pattern of employment growth and regional distribution of producer services show a clear core / periphery disparity. Much of the regional inequality in producer services is largely due to variation in demand associated with the pattern of corporation headquarters with the pattern of corporation headquarters and branch plants location with large manufacturing firms. The analysis of spatial division of labor reflects that producer services are related to the location of headquarters in manufacturing industry. Headquarters in manufacturing firms and business service firms tend to cluster each other. Most of the headquarters spatially separated from branch offices are clustered heavily in Seoul. Especially headquarters of business services and insurance services are overwhelmingly concentrated into Seoul. The firms whose headquarters are located in Seoul have a linkage pattern on a nationwide scale. It is viewed have little potential for generating local multiplier effects and regional development. In the light of the result of this study, producer services are not likely to disperse soon to peripheral regions. Consequently the absence of policies directed at enhancing producer sevice in the periphery, concentration tendency would continue to reinforce the core's dominance at the expense of peripheral regions. From a regional perspective, the quality of a region's producer service sector is a key determinant of economic growth, since manu industrial location decisions are influenced by the differential availability of producer services among regions. Poor performance of producer services in peripheral regions seemed to be linked to the region's manufacturing base. Low-wage, standardized branch plants are not likely to induce the growth in knowledge intensive services associated with high-technology corporate headquarters. Producer services may help to create and attract new business including manufacturing firms, and also to enhance the productivity and competitiveness of local firms. Therefore the provision of service producing activities would be lead not only to generate and retain endogenous development but also to attract external firms, especially small and medium sized firms which have a lower propensity of internalized services. Hence, it may be more efficient to create and expanse new locally owned producer services rather than to attract branch plants of mult-locational firms in order to make indigenous economic development.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2273-2278
• /
• 2007

Brazed Plate Heat Exchanger (BPHE) is a type of compact plate heat exchanger with parallel corrugated plates which are brazed together in series. Each plate hascorrugation called herringbone pattern. Inside a BPHE, hot fluid and cold fluid alternate its flow direction to establish counter current flow configuration. Two-phase flow heat transfer and pressure drop of R-22 in BPHE were experimentally measured in this study. In the present experiments, single-phase region and two-phase region coexist in a BPHE. Therefore, the inside of a BPHE have to be divided into single phase region and two phase region and analyzed accordingly. The results from the single phase flow analysis are then extended to the two phase flow analysis to correlate the condensation and evaporation heat transfer and pressure drop for the refrigerant R-22 in the BPHEs. Previous models for two- phase friction factor have been compared with the present experimental results.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.37-40
• /
• 2001

JBIG2 표준은 그레이 문서를 고압축의 이진 영상으로 부호화 하기위하여 선 영역(region of line-art), 하프톤 영역(region of Halftone), 텍스트 영역(region of Text)으로 세그먼트하여 각각 영역에 최적화 모드를 사용하여 부호화한다. 본 논문에서는 JBIG2에서 제공하는 세가지 모드의 코딩, 즉, 제네릭 영역(region of Generic) 코딩, 텍스트 영역을 위한 패턴 매칭(Pattern Matching) 코딩, 하프톤 영역을 위한 하프톤 코딩을 모두 구현하였다. 그리고, 각 영역을 세그먼트하는 방법을 개선하여 적용하여 세그먼트의 성능 향상을 이루었다. 특히, 부호화량이 많은 하프톤 영역의 세그먼트를 향상시켜 최적화 모드로 부호화 하도록 구현하였다. 팩스 테스트 영상(IEEE-l67a)으로 구현한 JBIC2 CODEC을 실험한 결과, 각 영역에 대한 세그먼트가 [6]의 방법에 의한 세그먼트보다 더 효율적으로 이루어졌으며 주관적 화질 또한 우수하였다.