• Journal of Advanced Navigation Technology
• /
• v.8 no.2
• /
• pp.98-104
• /
• 2004

When a straight-in landing from an instrument approach using ILS or VOR/DME is not possible or desirable because of topographical reason or bad weather, a circling approach maneuver is initiated by the pilot to align the aircraft with a runway for landing. Visual contact with the runway is necessary while conducting a circle to land maneuver. This research is to develop a new warning system based on a convention marker system which alerts pilots to watch out for exceeding the circling approach area. The airborne system also uses the same receiver unit without any new installations. The objective of this research is to design and develop a Yagi antenna in a special form. The research includes computer simulations to determine the size of antenna radiation pattern and to compute an expected flight path in case of alarm to validate effectiveness of the system.

• Journal of Advanced Navigation Technology
• /
• v.8 no.2
• /
• pp.190-196
• /
• 2004

The development of a new hardware structure which can implement the viterbi algorithm efficiently is required for applications such as a software radio because the viterbi algorithm, which is an error correction code function for the second and the third generation of mobile communication, needs a lot of arithmetic operations. The length of K in the viterbi algorithm different from each standard, for examples, K=7 in case of IS-95 standard and GSM standard, and K=9 in case of WCDMA and CDMA2000. In this paper, we propose a new hardware structure of an adaptive viterbi decoder which can decode the constraint length in K=3~9 and the data rate in 1/2 ~ 1/3. Prototyping results targeted to Altera Cyclon EPIC20F400C8, shows that the proposed hardware structure needs maximum 19,276 logic elements and power dissipation of 222.6 mW.

• Korean Journal of Remote Sensing
• /
• v.37 no.5_3
• /
• pp.1349-1359
• /
• 2021

Acquisition of precise position and velocity information of GNSS-INS (Global Navigation Satellite System; Inertial Navigation System) sensors in obtaining SAR SLC (Single Look Complex) images from raw data using BPA (Backprojection Algorithm) was regarded decisive. Several studies on BPA were accompanied by Kalman Filter for sensor noise oppression, but often implemented once where insufficient information was given to determine whether the filtering was effectively applied. Multiple operation of Kalman Filter on GNSS-INS sensor was presented in order to assess the effective order of sensor noise calibration. FMCW (Frequency Modulated Continuous Wave)-SAR raw data was collected from twice airborne experiments whose GNSS-INS information was practically and repeatedly filtered via Kalman Filter. It was driven that the FMCW-SAR raw data with diverse path information could derive different order of Kalman Filter with optimum operation of BPA image restoration.

• Journal of Advanced Navigation Technology
• /
• v.27 no.4
• /
• pp.429-435
• /
• 2023

The increasing complexity of avionics systems has emphasized the portability and reusability of software components. In this paper, a structural design method for IOSS (Input Output Service Segment) and TSS (Transport Service Segment) complying with the FACE (The Future Airborne Capability Environment) standard in the VxWorks 653 operating environment that satisfies ARINC 653 requirements is described. IOSS and TSS operate independently in different partitions to minimize time/space separation and the influence of other software, and to increase portability and reusability, strategy patterns among design patterns are applied. In addition, IOSS provides external interface service by applying distributed IO service structure, and among external interfaces, the ARINC 664 P7 interface of FACE-compliant equipment is placed in TSS to optimize the data movement path.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.11a
• /
• pp.187-187
• /
• 2022

최근 선박의 자율운항기술이 활발하게 연구되어 오면서, 경로추종 제어 및 충돌회피 등의 자율운항 기술 연구가 많이 진행되고 있으며 그에 따른 시뮬레이션과 실해역 시험 등도 활발하게 수행되고 있다. 이러한 자율운항기술 중 본 연구에서는 AUV(Autonomous Underwater Vehicle) 진회수 시 모함에 활용되며 쌍동선형을 갖는 쌍동형 무인수상선을 대상으로 경로추종 제어에 대한 실해역 시험을 수행한 내용을 소개한다. 대상선인 쌍동형 무인수상선은 배수량이 약 10ton, 최대속도 10knots를 기준으로 설계된 선형이며 Sail drive 타입의 쌍축 추진기를 탑재하고 있으며 Fig. 1에 나타내었다. 실해역 시험은 경기도 화성시에 위치한 제부마리나 전면 해역에서 여러 속도에 대해 Fig. 2의 경로(빨간색)를 활용하여 수행되었다. 해당 경로는 변침각이 45도까지 이루어져 있다. 경로추종 제어 알고리즘은 목표경유점을 향하기 위해 선수각을 제어하는 부분과 목표속도로 추진하기 위해 속도를 제어하는 부분으로 나뉘어져 있다. 선수각 제어 시 경로와 무인선과의 위치 오차를 줄이는 방향으로 선수각이 향할 수 있도록 알고리즘이 설계되었다. 속도 제어의 경우 RPM 별로 실제 속도를 계측하여 데이터화 한 후, 실제 속도가 명령 속도와 다를 경우 RPM을 가감하여 명령 속도로 추진하기 위해 제어할 수 있도록 하였다. Fig. 2에서 파란색 선은 설계한 알고리즘을 활용하여 경로추종 제어를 한 결과의 궤적을 보여준다.

• Journal of Advanced Navigation Technology
• /
• v.28 no.3
• /
• pp.309-314
• /
• 2024

Avionics Intercom performs communication between pilot, co-pilot and crews in aircraft. In the case of developing intercom in the aircraft modification development project, additional communication equipment or avionics equipment is configured to link the existing intercom with the headsets. Newly designed intercom needs a configuration that receives an aircraft headset microphone and transmits a microphone signal to the existing intercom, and these signals are required to perform signal quality above a certain level. To satisfy these requirements, microphone transmitter circuit has designed and tested, but quality factors of signal were not suitable. In order to avoid the issue, eliminate transmitter and apply signal bridge circuit considered with load effect, and it meets requirements. In this paper, the test results for the signal quality for each configuration are reviewed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.1
• /
• pp.203-215
• /
• 2017

Recently, interest in Pedestrian Navigation Service (PNS) is being increased due to the diffusion of smart phone and the improvement of location determination technology and it is efficient to use landmarks in route guidance for pedestrians due to the characteristics of pedestrians' movement and success rate of path finding. Accordingly, researches on extracting landmarks have been progressed. However, preceding researches have a limit that they only considered the difference between buildings and did not consider visual attention of maps in display of PNS. This study improves this problem by defining building attributes as local variable and global variable. Local variables reflect the saliency of buildings by representing the difference between buildings and global variables reflects the visual attention by representing the inherent characteristics of buildings. Also, this study considers the connectivity of network and solves the overlapping problem of landmark candidate groups by network voronoi diagram. To extract landmarks, we defined building attribute data based on preceding researches. Next, we selected a choice point for pedestrians in pedestrian network data, and determined landmark candidate groups at each choice point. Building attribute data were calculated in the extracted landmark candidate groups and finally landmarks were extracted by principal component analysis. We applied the proposed method to a part of Gwanak-gu, Seoul and this study evaluated the extracted landmarks by making a comparison with labels and landmarks used by portal sites such as the NAVER and the DAUM. In conclusion, 132 landmarks (60.3%) among 219 landmarks of the NAVER and the DAUM were extracted by the proposed method and we confirmed that 228 landmarks which there are not labels or landmarks in the NAVER and the DAUM were helpful to determine a change of direction in path finding of local level.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.4
• /
• pp.409-417
• /
• 2013

Mu-communication board supported by multi-communication is designed with Atxmega 128A1 which is a low power energy consuming of 8-bit microcontroller. ATxmega128A1 microcontroller consists of 8 UART(Universal asynchronous receiver/transmitter) ports which can be setting appropriate user interface having command line interpreter(CLI) program with each port, 2 kbytes EEPROM, 128 kbytes flash memory, 8 kbytes SRAM. 8 URAT ports are used for the multi communication modem, GPS module, etc. and EEPROM is used for saving a configuration for program running, and flash memory of 128 kbytes is used for storing a Firm Ware, and 8 kbytes SRAM is used for stack, storing memory of global variables while program running. If we uses the hybrid communication of path optimization of VHF, TRS and CDMA to remote control AtoN(aid to navigation), it is able to remove the communication shadow area. Even though there is a shadow area for individual communication method, we can select an optimum communication method. The compatibility of data has been enhanced as using of same data frame per communication devices. For the test, 8640 of data has been collected from the each buoy during 30 days in every 5 minutes and the receiving rate of the data has shown more than 99.4 %.

• Journal of Korea Society of Industrial Information Systems
• /
• v.23 no.1
• /
• pp.13-21
• /
• 2018

AGVS (Automated Guided Vehicle System) is a core technology of logistics automation which automatically moves specific objects or goods within a certain work space. Conventional AGVS generally requires the in-door localization system and each AGV equips expensive sensors such as laser, magnetic, inertial sensors for the route recognition and automatic navigation. thus the high installation cost is inevitable and there are many restrictions on route(path) modification or expansion. To address this issue, in this paper, we propose a cost-effective and scalable AGV based on a light-weight pattern recognition technique. The proposed pattern recognition technology not only enables autonomous driving by recognizing the route(path), but also provides a technique for figuring out the loc ation of AGV itself by recognizing the simple patterns(bar-code like) installed on the route. This significantly reduces the cost of implementing AGVS as well as benefiting from route modification and expansion. In order to verify the effectiveness of the proposed technique, we first implement a pattern recognition algorithm on a light-weight MCU(Micro Control Unit), and then verify the results by implementing an MCU_controlled AGV prototype.

• KIISE Transactions on Computing Practices
• /
• v.21 no.2
• /
• pp.101-108
• /
• 2015

This paper presents the implementation of a system that recommends empirical best routes based on classification of large trajectory data. As many location-based services are used, we expect the amount of location and trajectory data to become big data. Then, we believe we can extract the best empirical routes from the large trajectory repositories. Large trajectory data is clustered into similar route groups using Hadoop MapReduce framework. Clustered route groups are stored and managed by a DBMS, and thus it supports rapid response to the end-users' request. We aim to find the best routes based on collected real data, not the ideal shortest path on maps. We have implemented 1) an Android application that collects trajectories from users, 2) Apache Hadoop MapReduce program that can cluster large trajectory data, 3) a service application to query start-destination from a web server and to display the recommended routes on mobile phones. We validated our approach using real data we collected for five days and have compared the results with commercial navigation systems. Experimental results show that the empirical best route is better than routes recommended by commercial navigation systems.